search

OpenEVSE / OpenEVSE_PLUS

OpenEVSE Hardware
169 stars 71 forks source link

Bill of materials not ok?! #2

Closed micdre closed 7 years ago

micdre commented 7 years ago

Hello,

I found out that the BOM list, genretated in Eagle, is not ok in version 4 and 3! (maybe other versions too) Is there somewhere a good list.

Regards, Michel

chris1howell commented 7 years ago

I will take a look at the Eagle generated BOM. Any information on what parts are not okay?

micdre commented 7 years ago

Hello Thanks!

IC2 is not a mega 8 but a 328P IC3 is not a LMV358 but a LM358 IC4 is not a LMV358 bu a LF353 Maybe there's more...

Costs me a couple of parts....

Regards, Michel

Verstuurd vanaf mijn iPhone

Op 11 apr. 2017 om 21:39 heeft Chris Howell notifications@github.com<mailto:notifications@github.com> het volgende geschreven:

I will take a look at the Eagle generated BOM. Any information on what parts are not okay?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/OpenEVSE/OpenEVSE_PLUS/issues/2#issuecomment-293377590, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AaAt5OanwKMKgq3p1027xw1ZBOK7_In8ks5ru9btgaJpZM4M5xZF.

chris1howell commented 7 years ago

I updated the following part values so generic footprints report the correct part when exporting Eagle generated BOM.

IC2 value 328P IC3 value LM358 IC4 value LF353 TVS value P6SMB16CA D1 value AZ23C5V6-7-F

micdre commented 7 years ago

In wich version of the board?

Verstuurd vanaf mijn iPhone

Op 11 apr. 2017 om 22:07 heeft Chris Howell notifications@github.com<mailto:notifications@github.com> het volgende geschreven:

I updated the following part values so generic footprints report the correct part when exporting Eagle generated BOM.

IC2 value 328P IC3 value LM358 IC4 value LF353 TVS value P6SMB16CA D1 value AZ23C5V6-7-F

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/OpenEVSE/OpenEVSE_PLUS/issues/2#issuecomment-293384871, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AaAt5Kc0vCaPSEjiRwvulRwJArvykdhDks5ru91lgaJpZM4M5xZF.

chris1howell commented 7 years ago

V4.

On Apr 11, 2017 1:26 PM, "micdre" notifications@github.com<mailto:notifications@github.com> wrote: In wich version of the board?

Verstuurd vanaf mijn iPhone

Op 11 apr. 2017 om 22:07 heeft Chris Howell notifications@github.com<mailto:notifications@github.commailto:notifications@github.com<mailto:notifications@github.com>> het volgende geschreven:

I updated the following part values so generic footprints report the correct part when exporting Eagle generated BOM.

IC2 value 328P IC3 value LM358 IC4 value LF353 TVS value P6SMB16CA D1 value AZ23C5V6-7-F

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/OpenEVSE/OpenEVSE_PLUS/issues/2#issuecomment-293384871, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AaAt5Kc0vCaPSEjiRwvulRwJArvykdhDks5ru91lgaJpZM4M5xZF.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHubhttps://github.com/OpenEVSE/OpenEVSE_PLUS/issues/2#issuecomment-293389832, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ABvYH50hh1Q3WBz-j6e3Ijn0WjQ5jKeUks5ru-HxgaJpZM4M5xZF.

micdre commented 7 years ago

Thanks!

Verstuurd vanaf mijn iPhone

Op 11 apr. 2017 om 22:34 heeft Chris Howell notifications@github.com<mailto:notifications@github.com> het volgende geschreven:

V4.

On Apr 11, 2017 1:26 PM, "micdre" notifications@github.com<mailto:notifications@github.commailto:notifications@github.com> wrote: In wich version of the board?

Verstuurd vanaf mijn iPhone

Op 11 apr. 2017 om 22:07 heeft Chris Howell notifications@github.com<mailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com<mailto:notifications@github.com>> het volgende geschreven:

I updated the following part values so generic footprints report the correct part when exporting Eagle generated BOM.

IC2 value 328P IC3 value LM358 IC4 value LF353 TVS value P6SMB16CA D1 value AZ23C5V6-7-F

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/OpenEVSE/OpenEVSE_PLUS/issues/2#issuecomment-293384871, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AaAt5Kc0vCaPSEjiRwvulRwJArvykdhDks5ru91lgaJpZM4M5xZF.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHubhttps://github.com/OpenEVSE/OpenEVSE_PLUS/issues/2#issuecomment-293389832, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ABvYH50hh1Q3WBz-j6e3Ijn0WjQ5jKeUks5ru-HxgaJpZM4M5xZF.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/OpenEVSE/OpenEVSE_PLUS/issues/2#issuecomment-293391892, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AaAt5HFzgKjKpxOICllg82zijdx22NiBks5ru-PFgaJpZM4M5xZF.