How to use software to build a single cylinder base fan model and analyze it

OpenFAST / openfast

Main repository for the NREL-supported OpenFAST whole-turbine and FAST.Farm wind farm simulation codes.

http://openfast.readthedocs.io

Apache License 2.0

690 stars 457 forks source link

How to use software to build a single cylinder base fan model and analyze it #2054

Open sruispascal opened 8 months ago

sruispascal commented 8 months ago

Since there is no relevant case study, I want to use 'subdyn' to make a suction barrel-based offshore fan. Can I copy and paste the environment parameters from other models after modeling? I want to load things like turbulent wind and irregular waves on the fan model。

jjonkman commented 8 months ago

Dear @sruispascal,

I'm not aware of a publicly available OpenFAST model of a fixed-bottom offshore wind turbine with suction bucket foundation. The publicly available OpenFAST models with monopile foundation are likely closest to what you want. For example, see: https://github.com/OpenFAST/r-test/tree/main/glue-codes/openfast/5MW_OC3Mnpl_DLL_WTurb_WavesIrr or https://github.com/IEAWindTask37/IEA-15-240-RWT/tree/master/OpenFAST/IEA-15-240-RWT-Monopile.

Best regards,