search

OpenFAST / openfast

Main repository for the NREL-supported OpenFAST whole-turbine and FAST.Farm wind farm simulation codes.
http://openfast.readthedocs.io
Apache License 2.0
690 stars 457 forks source link

Layer parameters of NREL5MW wind turbine blades #2227

Closed EVElove444 closed 5 months ago

EVElove444 commented 5 months ago

Hello, I would like to ask if you have the Layer parameters of the 5MW wind turbine blades. I need to recalculate the parameters of ElastoDyn.Thank you very much.

jjonkman commented 5 months ago

Dear @EVElove444,

Are you asking for the composite layup of the NREL 5-MW baseline wind turbine blade that was reversed engineered by Brian Resor of SNL? This report has been discussed in the following topic on our forum: https://forums.nrel.gov/t/structural-design-of-the-wind-turbine-blade/271, but apparently the report is no longer available online (without authorization). I can send an electronic copy if that is what you want and you are willing to share your e-mail address.

Best regards,

EVElove444 commented 5 months ago

Hello, I have checked the 5MW layup information in detail in the forum. Can you send SNL's Brian Resor's report describing the reverse-engineered composite layup of the NREL 5-MW baseline blade to my email address 279521147@qq .com, I would be grateful

jjonkman commented 5 months ago

Dear @EVElove444,

I've sent you Brian Resor's report via e-mail.

Best regards,