rafmudaf
commented
3 years ago Hi @erikfurevik Nice job debugging the tests and explaining your process. MinGW on Windows is not a well tested or well supported configuration for OpenFAST. It should work fine, but may require some minor tweaks to the CMake configuration, as you've already seen. Also, just a heads up that the Intel compilers are now free for all systems.
Any test with an exit code of 0 is more than likely not a problem. The results comparison failed, but the test cases executed to completion. The nwtc_library_utest failed because the MinGW compiler is apparently not setting _WIN32 on a Windows system. This unit test relies on that variable to determine where to dump output. See NWTC_Library_test_tools.F90.
The non-zero exit code for the FAST Farm tests are concerning. It looks like there's a seg fault given that the log file stops printing. Are you able to compile FAST Farm in debug mode? You can do this with CMake: cmake .. -DCMAKE_BUILD_TYPE=DEBUG. Then, recompile FAST Farm and run those tests with verbose output: ctest -L fastfarm -VV.
erikfurevik
bjonkman
ValentinChb
ebranlard
You'll also want to specify locations for it to find your source files in the "Source Search" tab. After you have set all of these parameters, press "OK", and then select "Memory Error Analysis: Locate Memory Problems"
Among the problems found:
andrew-platt
Desciption Hi, I am trying to complete the r-tests on windows. First I will describe some problems I have encountered on the way and what I did to solve them (in case it is of use to you, or if it's the cause of current issues for me). Then, what my current issue is.
Procedure
git clone --single-branch --branch dev --recursive https://github.com/OpenFAST/openfast.gitcmake .. -G "MinGW Makefiles" -DBUILD_TESTING -DBUILD_FASTFARMmake install. So far no errors.ctest --output-on-failure. Nearly every test fails due to: "ModuleNotFoundError: No module named 'rtestlib'". I see that this library is in C:\openfast\reg_tests\lib, so I move all 5 files there to C:\openfast\reg_tests.ctest --output-on-failure. Now, nearly all fail due to:Error: file does not exist at C:/openfast/build/glue-codes/openfast/openfast. I see from C:\openfast\build\Testing\Temporary\LastTest.log that the commands being run are of the formApparently an .exe extension is missing from the executable file shown in bold, as adding this to the command completes with code 0. I believe the commands are decided by C:\openfast\build\reg_tests\CTestTestfile.cmake, so I enter this file and add .exe to all the executables (openfast, fast.farm, drivers).
This seems to fix most issues, the cmd output is now:
Error termination. Backtrace:
Could not print backtrace: libbacktrace could not find executable to open
0 0xffffffff
1 0xffffffff
2 0xffffffff
3 0xffffffff
4 0xffffffff
5 0xffffffff
6 0xffffffff
7 0xffffffff
8 0xffffffff
9 0xffffffff
10 0xffffffff
11 0xffffffff
12 0xffffffff
13 0xffffffff
14 0xffffffff
15 0xffffffff
16 0xffffffff
17 0xffffffff
18 0xffffffff
19 0xffffffff
20 0xffffffff
21 0xffffffff
22 0xffffffff
54/59 Test #56: beamdyn_utest ................................ Passed 0.35 sec Start 59: inflowwind_utest 55/59 Test #59: inflowwind_utest ............................. Passed 0.24 sec Start 58: fvw_utest 56/59 Test #58: fvw_utest .................................... Passed 0.02 sec 57/59 Test #29: StC_test_OC4Semi ............................. Passed 460.03 sec 58/59 Test #20: 5MW_OC4Jckt_DLL_WTurb_WavesIrr_MGrowth .......***Failed 1543.17 sec -- Using gold standard files with machine-compiler type macos-gnu C:/openfast/build/glue-codes/openfast/openfast.exe C:/openfast/build/reg_tests/glue-codes/openfast\5MW_OC4Jckt_DLL_WTurb_WavesIrr_MGrowth\5MW_OC4Jckt_DLL_WTurb_WavesIrr_MGrowth.fst > C:/openfast/build/reg_tests/glue-codes/openfast\5MW_OC4Jckt_DLL_WTurb_WavesIrr_MGrowth\5MW_OC4Jckt_DLL_WTurb_WavesIrr_MGrowth.log COMPLETE with code 0
59/59 Test #35: 5MW_OC4Semi_Linear ........................... Passed 1430.03 sec
88% tests passed, 7 tests failed out of 59
Label Time Summary: aeroacoustics = 62.70 secproc (1 test) aerodyn = 17.38 secproc (1 test) aerodyn14 = 646.08 secproc (8 tests) aerodyn15 = 5153.89 secproc (20 tests) beamdyn = 520.07 secproc (11 tests) bem = 17.38 secproc (1 test) dynamic = 66.70 secproc (3 tests) elastodyn = 5314.35 secproc (26 tests) extptfm = 42.11 secproc (1 test) fastfarm = 6.82 secproc (2 tests) hydrodyn = 6045.68 secproc (15 tests) linear = 1502.05 secproc (5 tests) map = 286.47 secproc (3 tests) moordyn = 913.31 secproc (2 tests) offshore = 4621.48 secproc (18 tests) olaf = 86.72 secproc (2 tests) openfast = 7804.15 secproc (35 tests) servodyn = 7605.20 secproc (28 tests) static = 3.03 secproc (4 tests) subdyn = 3342.75 secproc (7 tests)
Total Test time (real) = 2816.19 sec
The following tests FAILED: 9 - UAE_Dnwind_YRamp_WSt (Failed) 16 - SWRT_YFree_VS_WTurb (Failed) 19 - 5MW_OC3Trpd_DLL_WSt_WavesReg (Failed) 20 - 5MW_OC4Jckt_DLL_WTurb_WavesIrr_MGrowth (Failed) 36 - TSinflow (Failed) 37 - LESinflow (Failed) 57 - nwtc_library_utest (Failed) Errors while running CTest
C:\openfast\install\bin>FAST.Farm.exe C:\openfast\reg_tests\r-test\glue-codes\fast-farm\LESinflow\LESinflow.fstf
FAST.Farm
Copyright (C) 2021 National Renewable Energy Laboratory Copyright (C) 2021 Envision Energy USA LTD
This program is licensed under Apache License Version 2.0 and comes with ABSOLUTELY NO WARRANTY. See the "LICENSE" file distributed with this software for details.
FAST.Farm-v3.0.0-49-g216d4987 Compile Info:
Time: 13:54:22+0200
Heading of the FAST.Farm input file: Sample FAST.Farm input file Running AWAE. Running WakeDynamics.