search

OpenHantek / OpenHantek6022

OpenHantek6022 is a DSO software for Hantek USB digital signal oscilloscopes 6022BE / BL. Development OS is Debian Linux, but the program also works on FreeBSD, MacOS, RaspberryPi and Windows. No support for non-Linux related issues unless a volunteer steps in!
GNU General Public License v3.0
868 stars 153 forks source link

Openhantek rollback #65

Closed JuttDB closed 4 years ago

JuttDB commented 4 years ago

hello. I am using windows 10 with hantek6022BE. I was able to test the openhantek. now I like to go back to original firmware. can you please guide me to revert the openhantek firmware to original hantek6022BE.

vizkoze commented 4 years ago

Just unplug the device, stop openhantek and start hantek software. It should load the firmware stored in the official hantek software

From: JuttDB notifications@github.com Sent: Wednesday, March 18, 2020 3:50:33 PM To: OpenHantek/OpenHantek6022 OpenHantek6022@noreply.github.com Cc: Subscribed subscribed@noreply.github.com Subject: [OpenHantek/OpenHantek6022] Openhantek rollback (#65)

hello. I am using windows 10 with hantek6022BE. I was able to test the openhantek. now I like to go back to original firmware. can you please guide me to revert the openhantek firmware to original hantek6022BE.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://github.com/OpenHantek/OpenHantek6022/issues/65, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AFSYT2KVCKYX4HH5AUCASLDRIDNTTANCNFSM4LOTGU2A.

JuttDB commented 4 years ago

i did the same thing but original hantek software searching for the device. it's not detecting device any more

vizkoze commented 4 years ago

Have you tried turning it off and on again? 😉

From: JuttDB notifications@github.com Sent: Wednesday, March 18, 2020 4:03:52 PM To: OpenHantek/OpenHantek6022 OpenHantek6022@noreply.github.com Cc: vizkoze vizkoze@hotmail.com; Comment comment@noreply.github.com Subject: Re: [OpenHantek/OpenHantek6022] Openhantek rollback (#65)

i did the same thing but original hantek software searching for the device. it's detecting device any more

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/OpenHantek/OpenHantek6022/issues/65#issuecomment-600674804, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AFSYT2LI2GWQDQ3RK7DPJTTRIDPFRANCNFSM4LOTGU2A.

JuttDB commented 4 years ago

yes, I removed the USB and connect again. even on the pc side I also did reset.

JuttDB commented 4 years ago

is there anything that I need to do with Zadig software again.

Ho-Ro commented 4 years ago

Did you read the Zadig FAQ?

JuttDB commented 4 years ago

after uninstalling from Universal Serial Bus devices everything is working again.

fire1 commented 4 years ago

Change USB port! I notice this but after changing USB port (to use original, saleae logic analyzer and OpenHantek for 3 different ports) I use all without any software issues