Anyka ak3918

[bolt1502]

Hello.This chip is supported ak3918 ?

[ZigFisher]

Hello This character is in the plans for the future While there is no support, you need to wait

[ricardojlrufino]

I make progress in reverse engineering of camera model: v380

Info Boot

[13:59:32:303] Anyka Linux Kernel Version: 2.5.02 [13:59:32:343] Booting Linux on physical CPU 0 [13:59:32:343] Linux version 3.4.35 (ma@ma-PC) (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #5 Wed Sep 18 15:36:19 CST 2019 [13:59:32:343] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 [13:59:32:343] CPU: VIVT data cache, VIVT instruction cache [13:59:32:366] Machine: Cloud39E_AK3918E+H42_V1.0.2 [13:59:32:366] Memory policy: ECC disabled, Data cache writeback [13:59:32:366] ANYKA CPU AK3918 (ID 0x20150200)

I got: read raw image get mic input audio output.

But this using original Kernel and Libraries.

And samples from: files extrated from: http://www.iotelink.com/frank/ak3918ev300v18 and from: https://github.com/helloworld-spec/qiwen/tree/main/anycloud39ev300

I managed to compile some examples, but the original camera libraries (.so) are slightly different from the anycloud39ev300(repo), and there are some limitations.

One problem is being able to use Hardware Video Decoder/Encoder (ISP), because the file 'isp_sc1245.conf" is incompatible with the libraries of (ak3918ev300v18 repository)

-- I tried to use OpenIPC, but neither rootfs nor Kernel does not boot my camera.

[ricardojlrufino]

I'm documenting the process in : https://ricardojlrufino.wordpress.com/2022/02/14/hack-ipcam-anyka-teardown-and-root-access/

And https://github.com/ricardojlrufino/anyka_v380ipcam_experiments

[dimerr]

dup https://github.com/OpenIPC/firmware/issues/207

[bolt1502]

Спасибо.Значит я в пролёте,жаль.Буду ждать,может кто дамп выкинет на просторы.

 

Понедельник, 13 июня 2022, 20:29 +03:00 от Dmitry Ermakov @.***>:     Closed #126 as not planned. — Reply to this email directly, view it on GitHub , or unsubscribe . You are receiving this because you authored the thread. Message ID: <OpenIPC/firmware/issue/126/issue_event/6797965304 @ github . com>    

Alex Alex Отправлено из Почты Mail.ru  

[dimerr]

Спасибо.Значит я в пролёте,жаль.Буду ждать,может кто дамп выкинет на просторы.   Понедельник, 13 июня 2022, 20:29 +03:00 от Dmitry Ermakov @.***>:     Closed #126 as not planned. — Reply to this email directly, view it on GitHub , or unsubscribe . You are receiving this because you authored the thread. Message ID: <OpenIPC/firmware/issue/126/issue_event/6797965304 @ github . com>     -- Alex Alex Отправлено из Почты Mail.ru

This issue is a duplicate of another same topic about anyka v200. At the moment we lack newer version of anyka sdk, then one that we have won't boot.

[berserkerkz]

Спасибо.Значит я в пролёте,жаль.Буду ждать,может кто дамп выкинет на просторы.
Понедельник, 13 июня 2022, 20:29 +03:00 от Dmitry Ermakov @.***>: Closed #126 as not planned. — Reply to this email directly, view it on GitHub , or unsubscribe . You are receiving this because you authored the thread. Message ID: <OpenIPC/firmware/issue/126/issue_event/6797965304 @ github . com> -- Alex Alex Отправлено из Почты Mail.ru

У меня есть дамп

[bolt1502]

Спасибо.Значит я в пролёте,жаль.Буду ждать,может кто дамп выкинет на просторы.
Понедельник, 13 июня 2022, 20:29 +03:00 от Dmitry Ermakov @.***>: Closed #126 as not planned. — Reply to this email directly, view it on GitHub , or unsubscribe . You are receiving this because you authored the thread. Message ID: <OpenIPC/firmware/issue/126/issue_event/6797965304 @ github . com> -- Alex Alex Отправлено из Почты Mail.ru

У меня есть дамп

Можете поделиться? bolt1502@mail.ru

[berserkerkz]

да не вопрос, скинул на почту.