Closed 001Tycoon closed 3 years ago
Good afternoon Your type of flash drive is not supported in the current version of Linux in the openipc-2.1 project. Please send a photo of the flash chip (8 pin) or a text description.
Try with the latest commit/build
Hello @dimerr Try with the latest commit/build Patch error
patching file scripts/Makefile.clean
patching file scripts/setlocalversion
patching file scripts/dtc/dtc-lexer.lex.c_shipped
patching file drivers/mtd/spi-nor/spi-nor.c
patching file drivers/mtd/spi-nor/spi-nor.c
patching file drivers/mtd/spi-nor/spi-nor.c
patching file drivers/mtd/spi-nor/spi-nor.c
patch unexpectedly ends in middle of line
Hunk #1 succeeded at 1219 with fuzz 2.
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- a/drivers/mtd/spi-nor/spi-nor.c<--->2021-08-24 08:00:01.771026933 +0300
|+++ b/drivers/mtd/spi-nor/spi-nor.c<--->2021-08-24 08:04:33.973630596 +0300
--------------------------
File to patch:
@ZigFisher
With other settings it is boot up
bootargs=mem=${osmem} console=ttyAMA0,115200 panic=5 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:960k(boot),64k(env),2048k(kernel),6144k(rootfs),-(rootfs_data)
bootcmd=setenv setargs setenv bootargs ${bootargs}; run setargs; sf probe 0; sf read 0x41000000 0x100000 0x200000; bootm 0x41000000
SF: 2097152 bytes @ 0x100000 Read: OK
## Booting kernel from Legacy Image at 41000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1980080 Bytes = 1.9 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.9.37 (ingo@acer-p256-m) (gcc version 7.5.0 (Buildroot -gcc7fac4-dirty) ) #1 Mon Aug 23 22:56:57 CEST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3518EV300 DEMO Board
cmz zone is not set!
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: mem=32M console=ttyAMA0,115200 panic=5 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:960k(boot),64k(env),2048k(kernel),6144k(rootfs),-(rootfs_data)
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 26772K/32768K available (4085K kernel code, 149K rwdata, 916K rodata, 172K init, 243K bss, 5996K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc2800000 - 0xff800000 ( 976 MB)
lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc04056d8 (4086 kB)
.init : 0xc04ed000 - 0xc0518000 ( 172 kB)
.data : 0xc0518000 - 0xc053d760 ( 150 kB)
.bss : 0xc053f000 - 0xc057bcc8 ( 244 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c2867000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c286b000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=13 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pl061_gpio 120b0000.gpio_chip: PL061 GPIO chip @0x120b0000 registered
pl061_gpio 120b1000.gpio_chip: PL061 GPIO chip @0x120b1000 registered
pl061_gpio 120b2000.gpio_chip: PL061 GPIO chip @0x120b2000 registered
pl061_gpio 120b4000.gpio_chip: PL061 GPIO chip @0x120b4000 registered
pl061_gpio 120b5000.gpio_chip: PL061 GPIO chip @0x120b5000 registered
pl061_gpio 120b6000.gpio_chip: PL061 GPIO chip @0x120b6000 registered
pl061_gpio 120b7000.gpio_chip: PL061 GPIO chip @0x120b7000 registered
pl061_gpio 120b8000.gpio_chip: PL061 GPIO chip @0x120b8000 registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: The ID: 0x20 isn't in the BP table, Current device can't not protect
@spi_nor_scan(), no "m25p,fast-read".
@spi_nor_scan(), modes->rd_modes:0x3d.
hisi-sfc hisi_spi_nor.0: (Fast) Read: opcode=EBh, protocol=144, mode=0, wait=24
hisi-sfc hisi_spi_nor.0: nor->read_opcode[3: Read; 0B: Fast Read; 3B: Dual; BB: Dual IO; 6B: Quad; EB: Quad IO]: 0xeb.
hisi-sfc hisi_spi_nor.0: xm25qh128a (Chipsize 16 Mbytes, Blocksize 64KiB)
5 cmdlinepart partitions found on MTD device hi_sfc
5 cmdlinepart partitions found on MTD device hi_sfc
Creating 5 MTD partitions on "hi_sfc":
0x000000000000-0x0000000f0000 : "boot"
0x0000000f0000-0x000000100000 : "env"
0x000000100000-0x000000300000 : "kernel"
0x000000300000-0x000000900000 : "rootfs"
0x000000900000-0x000001000000 : "rootfs_data"
SPI Nand ID Table Version 2.7
Cannot found a valid SPI Nand Device
hisi_spi_nand_probe(175): Error: driver probe, result: -19
No OTP data, festa PHY use default ATE parameters!
festa PHY wait autotrim done timeout!
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
hisi-femac 10040000.ethernet: connect to PHY failed!
hibvt_rtc 120e0000.rtc: rtc core: registered 120e0000.rtc as rtc0
hibvt_rtc 120e0000.rtc: RTC driver for hibvt enabled
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
hibvt_rtc 120e0000.rtc: setting system clock to 1970-01-01 00:00:00 UTC (0)
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
Freeing unused kernel memory: 172K (c04ed000 - c0518000)
This architecture does not have kernel memory protection.
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Loading modules:Initializing random number generator: OK
Saving random seed: OK
Starting rngd: OK
Starting mdev...
Starting network: Cannot parse config file '/etc/fw_env.config': No such file or directory
ip: SIOCGIFINDEX: No such device
FAIL
Starting ntpd: OK
Starting dropbear sshd: OK
Starting mini-snmpd: OK
hisilicon: Check MAC for Xiongmai devices
Cannot parse config file '/etc/fw_env.config': No such file or directory
Cannot parse config file '/etc/fw_env.config': No such file or directory
hisilicon: The eth0 interface has a correct MAC -
hisilicon: Loading of kernel modules and initialization of the video system has started
get_hisi_chip_id() got unexpected 0x3518e300
Cannot parse config file '/etc/fw_env.config': No such file or directory
Cannot parse config file '/etc/fw_env.config': No such file or directory
mmz_start: 0x42000000, mmz_size: 32M
Cannot parse config file '/etc/fw_env.config': No such file or directory
get_hisi_chip_id() got unexpected 0x3518e300
rmmod: can't unload module 'cma_osal': No such file or directory
hisilicon: Get data from ipcinfo and set SENSOR as unknown
Cannot parse config file '/etc/fw_env.config': No such file or directory
Error: environment not initialized
Starting majestic: OK
Welcome to OpenIPC v2.1
hi3518ev300-openipc login:
Sorry ,copy-paste issue, try again
@dimerr Thanks works
System booted i have a problem with fw_env.config root@hi3518ev300-openipc:~# fw_printenv Cannot parse config file '/etc/fw_env.config': No such file or directory
what information do you need
I believe you need to replace bootloader...
I tried that
System startup
Uncompress Ok!
U-Boot 2016.11 (May 09 2019 - 15:47:33 +0800)hi3518ev300
Relocation Offset is: 03737000
Relocating to 43f37000, new gd at 43e96ef0, sp at 43e96ed0
SPI Nor: NAND: 0 MiB
MMC:
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
hisilicon #
System startup
Uncompress Ok!
U-Boot 2020.01 (Sep 02 2020 - 17:34:02 +0800)hi3518ev300
DRAM: SPI Nor: hifmc_ip_ver_check(54): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(60): Found
hifmc_spi_nor_probe(2070): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(2095): SPI Nor(cs 0) ID: 0x20 0x70 0x18
hifmc_init_print(2016): Block:64KB hifmc_init_print(2017): Chip:16MB hifmc_init_print(2018): Name:"XM25QH128A"
hifmc100_spi_nor_probe(145): SPI Nor total size: 16MB
NAND: 0 MiB
Loading Environment from SPI Flash... OK
In: serial
Out: serial
Err: serial
Net: eth0
Error: eth0 address not set.
Hit any key to stop autoboot: 0
hisilicon #
the same mistakes everywhere where can I get other bootloaders
Hello @dimerr u-boot-hi3518ev300-beta.bin After saving the settings saveenv system does not boot.
hisilicon # saveenv
Saving Environment to SPI Flash...
Erasing SPI flash...Writing to SPI flash...done
hisilicon # reset
resetting ...
System startup
nothing more
boots without saveenv
System startup
Uncompress Ok!
U-Boot 2016.11-g0c517e3-dirty (Aug 23 2021 - 16:24:40 +0300)hi3516ev200
Relocation Offset is: 03750000
Relocating to 43f50000, new gd at 43f0fef0, sp at 43f0fed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1664): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1689): SPI Nor(cs 0) ID: 0x20 0x70 0x18
hifmc_spi_nor_probe(1754): Block:64KB hifmc_spi_nor_probe(1755): Chip:16MB hifmc_spi_nor_probe(1756): Name:"XM25QH128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC:
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 42:48:5c:c5:d2:a3
Hit any key to stop autoboot: 0
device 0 offset 0x50000, size 0x200000
SF: 2097152 bytes @ 0x50000 Read: OK
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1978264 Bytes = 1.9 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.9.37 (ingo@acer-p256-m) (gcc version 7.5.0 (Buildroot -g917914b) ) #2 Tue Aug 24 15:03:27 CEST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3518EV300 DEMO Board
cmz zone is not set!
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: mem=32M console=ttyAMA0,115200 panic=20 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:256k(boot),64k(env),2048k(kernel),5120k(rootfs),-(rootfs_data)
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 26776K/32768K available (4084K kernel code, 148K rwdata, 912K rodata, 176K init, 243K bss, 5992K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc2800000 - 0xff800000 ( 976 MB)
lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0405538 (4086 kB)
.init : 0xc04ec000 - 0xc0518000 ( 176 kB)
.data : 0xc0518000 - 0xc053d360 ( 149 kB)
.bss : 0xc053f000 - 0xc057bcc8 ( 244 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c2867000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c286b000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=13 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pl061_gpio 120b0000.gpio_chip: PL061 GPIO chip @0x120b0000 registered
pl061_gpio 120b1000.gpio_chip: PL061 GPIO chip @0x120b1000 registered
pl061_gpio 120b2000.gpio_chip: PL061 GPIO chip @0x120b2000 registered
pl061_gpio 120b4000.gpio_chip: PL061 GPIO chip @0x120b4000 registered
pl061_gpio 120b5000.gpio_chip: PL061 GPIO chip @0x120b5000 registered
pl061_gpio 120b6000.gpio_chip: PL061 GPIO chip @0x120b6000 registered
pl061_gpio 120b7000.gpio_chip: PL061 GPIO chip @0x120b7000 registered
pl061_gpio 120b8000.gpio_chip: PL061 GPIO chip @0x120b8000 registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: The ID: 0x20 isn't in the BP table, Current device can't not protect
@spi_nor_scan(), no "m25p,fast-read".
@spi_nor_scan(), modes->rd_modes:0xd.
hisi-sfc hisi_spi_nor.0: (Fast) Read: opcode=BBh, protocol=122, mode=0, wait=8
hisi-sfc hisi_spi_nor.0: nor->read_opcode[3: Read; 0B: Fast Read; 3B: Dual; BB: Dual IO; 6B: Quad; EB: Quad IO]: 0xbb.
hisi-sfc hisi_spi_nor.0: xm25qh128a (Chipsize 16 Mbytes, Blocksize 64KiB)
5 cmdlinepart partitions found on MTD device hi_sfc
5 cmdlinepart partitions found on MTD device hi_sfc
Creating 5 MTD partitions on "hi_sfc":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000050000 : "env"
0x000000050000-0x000000250000 : "kernel"
0x000000250000-0x000000750000 : "rootfs"
0x000000750000-0x000001000000 : "rootfs_data"
SPI Nand ID Table Version 2.7
Cannot found a valid SPI Nand Device
hisi_spi_nand_probe(175): Error: driver probe, result: -19
No OTP data, festa PHY use default ATE parameters!
festa PHY wait autotrim done timeout!
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
hisi-femac 10040000.ethernet: connect to PHY failed!
hibvt_rtc 120e0000.rtc: rtc core: registered 120e0000.rtc as rtc0
hibvt_rtc 120e0000.rtc: RTC driver for hibvt enabled
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
mmc0: new high speed SDHC card at address 2167
mmcblk0: mmc0:2167 APPSD 30.2 GiB
mmcblk0: p1
hibvt_rtc 120e0000.rtc: hctosys: unable to read the hardware clock
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
Freeing unused kernel memory: 176K (c04ec000 - c0518000)
This architecture does not have kernel memory protection.
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Loading modules:Initializing random number generator: OK
Saving random seed: OK
Starting rngd: OK
Starting mdev...
mount: mounting /dev/mmcblk0p1 on /mnt/mmcblk0p1 failed: Invalid argument
Starting network: Cannot parse config file '/etc/fw_env.config': No such file or directory
ip: SIOCGIFINDEX: No such device
FAIL
Starting ntpd: OK
Starting dropbear sshd: OK
Starting mini-snmpd: OK
hisilicon: Check MAC for Xiongmai devices
Cannot parse config file '/etc/fw_env.config': No such file or directory
Cannot parse config file '/etc/fw_env.config': No such file or directory
hisilicon: The eth0 interface has a correct MAC -
hisilicon: Loading of kernel modules and initialization of the video system has started
get_hisi_chip_id() got unexpected 0x3518e300
Cannot parse config file '/etc/fw_env.config': No such file or directory
Cannot parse config file '/etc/fw_env.config': No such file or directory
mmz_start: 0x42000000, mmz_size: 32M
Cannot parse config file '/etc/fw_env.config': No such file or directory
get_hisi_chip_id() got unexpected 0x3518e300
rmmod: can't unload module 'cma_osal': No such file or directory
hisilicon: Get data from ipcinfo and set SENSOR as unknown
Cannot parse config file '/etc/fw_env.config': No such file or directory
Error: environment not initialized
Starting majestic: OK
Welcome to OpenIPC v2.1
hi3518ev300-openipc login:
other logs are required?
Try same link, updated
@dimerr u-boot-hi3518ev300-beta.bin is running now saveenv is work now fw_printenv fw_setenv is work now. Thanks very much
@dimerr this link are no longer availiable, where can I download that uboot file? thx
Hello Model Escam PVR008 Board S834-A0-B Sensor F23 CPU Hi3518ERNCV300 Network Realtk 8188ETV (M8188FU3)
openipc-2.1 commit ab38bfa0824ec2fd8eb8ef7cb4cf6e9f404cca02 serial flash u-boot 0x000000 Length 0x100000 uImage 0x100000 Length 0x200000 rootfs.squashfs 0x300000 Length 0x500000
bootargs=mem=${osmem:-32M} console=ttyAMA0,115200 panic=5 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:256k(boot),64k(env),2048k(kernel),5120k(rootfs),-(rootfs_data) bootcmd=setenv setargs setenv bootargs ${bootargs}; run setargs; sf probe 0; sf read 0x42000000 0x100000 0x300000; bootm 0x42000000
System startup
Uncompress Ok!
U-Boot 2020.01 (Sep 02 2020 - 17:34:02 +0800)hi3518ev300
DRAM: SPI Nor: hifmc_ip_ver_check(54): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(60): Found hifmc_spi_nor_probe(2070): SPI Nor ID Table Version 1.0 hifmc_spi_nor_probe(2095): SPI Nor(cs 0) ID: 0x20 0x70 0x18 hifmc_init_print(2016): Block:64KB hifmc_init_print(2017): Chip:16MB hifmc_init_print(2018): Name:"XM25QH128A" hifmc100_spi_nor_probe(145): SPI Nor total size: 16MB NAND: 0 MiB Loading Environment from SPI Flash... OK In: serial Out: serial Err: serial Net: eth0 Error: eth0 address not set.
Hit any key to stop autoboot: 0 device 0 offset 0x100000, size 0x300000
SF: 3145728 bytes @ 0x100000 Read: OK Booting kernel from Legacy Image at 42000000 ... Image Name: Linux-4.9.37 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1978216 Bytes = 1.9 MiB Load Address: 40008000 Entry Point: 40008000 Loading Kernel Image
Starting kernel ...
Booting Linux on physical CPU 0x0 Linux version 4.9.37 (ingo@acer-p256-m) (gcc version 7.5.0 (Buildroot -gab38bfa) ) #1 Sun Aug 22 09:27:48 CEST 2021 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt:Machine model: Hisilicon HI3518EV300 DEMO Board cmz zone is not set! Memory policy: Data cache writeback CPU: All CPU(s) started in SVC mode. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Kernel command line: mem=32M console=ttyAMA0,115200 panic=5 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:256k(boot),64k(env),2048k(kernel),5120k(rootfs),-(rootfs_data) PID hash table entries: 128 (order: -3, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 26776K/32768K available (4084K kernel code, 148K rwdata, 912K rodata, 176K init, 243K bss, 5992K reserved, 0K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc2800000 - 0xff800000 ( 976 MB) lowmem : 0xc0000000 - 0xc2000000 ( 32 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc0405538 (4086 kB) .init : 0xc04ec000 - 0xc0518000 ( 176 kB) .data : 0xc0518000 - 0xc053d360 ( 149 kB) .bss : 0xc053f000 - 0xc057bcc8 ( 244 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:16 nr_irqs:16 16 Gic dist init... arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 20ns clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok Setting up static identity map for 0x40008200 - 0x40008258 devtmpfs: initialized VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations Serial: AMBA PL011 UART driver 12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2 console [ttyAMA0] enabled ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022 ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c2867000 ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022 ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c286b000 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. workingset: timestamp_bits=30 max_order=13 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered pl061_gpio 120b0000.gpio_chip: PL061 GPIO chip @0x120b0000 registered pl061_gpio 120b1000.gpio_chip: PL061 GPIO chip @0x120b1000 registered pl061_gpio 120b2000.gpio_chip: PL061 GPIO chip @0x120b2000 registered pl061_gpio 120b4000.gpio_chip: PL061 GPIO chip @0x120b4000 registered pl061_gpio 120b5000.gpio_chip: PL061 GPIO chip @0x120b5000 registered pl061_gpio 120b6000.gpio_chip: PL061 GPIO chip @0x120b6000 registered pl061_gpio 120b7000.gpio_chip: PL061 GPIO chip @0x120b7000 registered pl061_gpio 120b8000.gpio_chip: PL061 GPIO chip @0x120b8000 registered brd: module loaded hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2 hisi-sfc hisi_spi_nor.0: The ID: 0x20 isn't in the BP table, Current device can't not protect @spi_nor_scan(), no "m25p,fast-read". @spi_nor_scan(), modes->rd_modes:0x3d. hisi-sfc hisi_spi_nor.0: (Fast) Read: opcode=EBh, protocol=144, mode=0, wait=24 hisi-sfc hisi_spi_nor.0: nor->read_opcode[3: Read; 0B: Fast Read; 3B: Dual; BB: Dual IO; 6B: Quad; EB: Quad IO]: 0xeb. hisi-sfc hisi_spi_nor.0: xm25qh128a (Chipsize 16 Mbytes, Blocksize 64KiB) 5 cmdlinepart partitions found on MTD device hi_sfc 5 cmdlinepart partitions found on MTD device hi_sfc Creating 5 MTD partitions on "hi_sfc": 0x000000000000-0x000000040000 : "boot" 0x000000040000-0x000000050000 : "env" 0x000000050000-0x000000250000 : "kernel" 0x000000250000-0x000000750000 : "rootfs" 0x000000750000-0x000001000000 : "rootfs_data" SPI Nand ID Table Version 2.7 Cannot found a valid SPI Nand Device hisi_spi_nand_probe(175): Error: driver probe, result: -19 No OTP data, festa PHY use default ATE parameters! festa PHY wait autotrim done timeout! libphy: hisi_femac_mii_bus: probed libphy: Fixed MDIO Bus: probed hisi-femac 10040000.ethernet: connect to PHY failed! hibvt_rtc 120e0000.rtc: rtc core: registered 120e0000.rtc as rtc0 hibvt_rtc 120e0000.rtc: RTC driver for hibvt enabled i2c /dev entries driver hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode usbcore: registered new interface driver usbhid usbhid: USB HID core driver Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered hibvt_rtc 120e0000.rtc: hctosys: unable to read the hardware clock List of all partitions: 0100 65536 ram0 (driver?) 0101 65536 ram1 (driver?) 0102 65536 ram2 (driver?) 0103 65536 ram3 (driver?) 0104 65536 ram4 (driver?) 0105 65536 ram5 (driver?) 0106 65536 ram6 (driver?) 0107 65536 ram7 (driver?) 0108 65536 ram8 (driver?) 0109 65536 ram9 (driver?) 010a 65536 ram10 (driver?) 010b 65536 ram11 (driver?) 010c 65536 ram12 (driver?) 010d 65536 ram13 (driver?) 010e 65536 ram14 (driver?) 010f 65536 ram15 (driver?) 1f00 256 mtdblock0 (driver?) 1f01 64 mtdblock1 (driver?) 1f02 2048 mtdblock2 (driver?) 1f03 5120 mtdblock3 (driver?) 1f04 8896 mtdblock4 (driver?) No filesystem could mount root, tried: squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3) CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.37 #1 Hardware name: Generic DT based system Backtrace: [] (dump_backtrace) from [] (show_stack+0x18/0x1c)
r7:c1a6d009 r6:c047de88 r5:00000000 r4:c053f2e8
[] (show_stack) from [] (dump_stack+0x24/0x28)
[] (dump_stack) from [] (panic+0xe4/0x24c)
[] (panic) from [] (mount_block_root+0x280/0x2dc)
r3:d3053b52 r2:d3053b52 r1:c183de8c r0:c047de88
r7:c1a6d009
[] (mount_block_root) from [] (mount_root+0x138/0x154)
r10:c050d838 r9:c04ec620 r8:c050d834 r7:c053f024 r6:c051d18c r5:01f00003
r4:c051a808
[] (mount_root) from [] (prepare_namespace+0x184/0x1cc)
r10:c050d838 r9:c04ec620 r8:c050d834 r7:c053f000 r6:c053f000 r5:c053f024
r4:c050d858
[] (prepare_namespace) from [] (kernel_init_freeable+0x1d0/0x1e0)
r6:c053f000 r5:00000009 r4:c04e93a4
[] (kernel_init_freeable) from [] (kernel_init+0x10/0xfc)
r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0400448
r4:00000000
[] (kernel_init) from [] (ret_from_fork+0x14/0x2c)
r5:c0400448 r4:00000000
hisilicon # bdinfo arch_number = 0x00001f40 boot_params = 0x40000100 DRAM bank = 0x00000000 -> start = 0x40000000 -> size = 0x04000000 eth0name = eth0 ethaddr = (not set) current eth = eth0 ip_addr = 192.168.2.221 baudrate = 115200 bps TLB addr = 0x43ff0000 relocaddr = 0x43f68000 reloc off = 0x03768000 irq_sp = 0x43ec7ed0 sp start = 0x43ec7ec0 Early malloc usage: 6c / 2000 hisilicon # coninfo List of available devices: serial 00000003 IO stdin stdout stderr pl01x_serial 00000003 IO
hisilicon # getinfo spi Block:64KB Chip:16MB*1 ID:0x20 0x70 0x18 Name:"XM25QH128A"
hisilicon # pri arch=arm baudrate=115200 board=hi3518ev300 board_id=MHgyMDdm board_name=hi3518ev300 bootargs=mem=${osmem:-32M} console=ttyAMA0,115200 panic=5 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:256k(boot),64k(env),2048k(kernel),5120k(rootfs),-(rootfs_data) bootcmd=setenv setargs setenv bootargs ${bootargs}; run setargs; sf probe 0; sf read 0x42000000 0x100000 0x300000; bootm 0x42000000 bootdelay=1 cpu=armv7 ethact=eth0 ipaddr=192.168.2.221 netmask=255.255.255.0 osmem=32M ptzsupport=1 sensor_name=F23 serverip=192.168.2.40 soc=hi3518ev300 stderr=serial stdin=serial stdout=serial totalmem=64M vendor=hisilicon verify=n
Environment size: 889/262140 bytes
what can I do that he finds the root filesystem