Closed syakiba closed 4 months ago
Have you read the docs? Yes
macOS Version 13.5.2
Kext Version v2.3.0
Wireless Adapter Model and USB Product ID Intel Wi-Fi AC 9462
Description I have a similar issue too, but it's connected, just an output issue. Airpods Pro 2 only works when using hands-free mode or 8000Hz sample rate. 48KHz won't output sound at all. It was after the 13.5.2 update, it worked for a few seconds, then glitched out with a robotic sound, and then total silence. Tried to forget the device and pair it again, no output ever since. Other non apple Bluetooth sound devices works fine.
Info in System Report - Bluetooth
Bluetooth Controller:
Address: A8:7E:EA:DE:2A:23
State: On
Chipset: THIRD_PARTY_DONGLE
Discoverable: Off
Firmware Version: v256 c256
Supported Devices: 0x382039 < HFP AVRCP A2DP HID Braille AACP GATT SerialPort >
Transport: USB
Vendor ID: 0x004C (Apple)
Connected:
----------
Address: ----------
RSSI: -65
Services: 0x400000 < BLE >
Cy’s AirPods Pro:
Address: ----------
Vendor ID: 0x004C
Product ID: 0x2014
Left Battery Level: 100%
Right Battery Level: 100%
Case Version: 60.82.0
Firmware Version: 6A301
Minor Type: Headphones
RSSI: -58
Serial Number: ----------
Serial Number (Left): ----------
Serial Number (Right): ----------
Services: 0x980019 < HFP AVRCP A2DP AACP GATT ACL >
Relevant log output
nothing
Kernel Panic Logs
No response
Try to add BcrmPatchRam3.kext
, it worked for me
Hmm, doesn't work for me, it is connected like usual, but the sound still doesn't go through.
With or without the BcrmPatchRam3.kext and BrcmBluetoothInjector.kext. The OS has to be playing sound for about 2~3 minutes for the AirPods to receive sound, but it's very delayed and robotic, flickering sound even. The Airpods play for a few seconds then go silent again. Changing playback apps also immediately stop sound transmission.
Interestingly, my left Airpod drains the battery quicker than the right one. Just a few minutes become L92%, R97%. The battery drain problem goes away when connected to the iPad. I think at this time, I better off using other earbuds.
Try to add
BcrmPatchRam3.kext
, it worked for me
works for me with ac9260 (airpods pro paired successfully) , but my logitech devices (mouse, keyboard) still having issue when pairing. It is discovered, connected, but not paired
do I need to apply another BrcmPatchRam ?
Airpods pro 2 also don't work, they connect, but there is no sound, the sound only works on 16 bits
Airpods pro 2 dont work, sound is issued only with 16 bits, please fix it please
Not this repo drivers issue.
Have you read the docs?
Yes
macOS Version
13.5.2
Kext Version
v2.3.0
Wireless Adapter Model and USB Product ID
intel ac3165
Description
bluetooth can be opened or closed, and it can connect the keyboard, but my two Airpods neither can be connected.
Info in System Report - Bluetooth
Relevant log output
Kernel Panic Logs
No response