Closed 9Khaled9 closed 8 years ago
Have you found any solution because i am have same problem. Please help i am stuck...
Dear anandmahato29
I faced many of problems during the installation and running OpenIoT...
The best solution i found, is to to install the pre-configured OpenIoT over Virtual Box...
you can find the guide of download, install and run Oracle Virtual Box and OpenIoT Virtual Box Image through this link:
VDKv2 OpenIoT Release 0.6.1 Virtual Box Setup Guide ...https://github.com/OpenIotOrg/openiot/wiki/VDKv2---OpenIoT-Release-0.6.1---Virtual-Box-Setup-Guide github.com Hylke van der Schaaf edited this page Nov 5, 2015 · 28 revisions Install the oracle virtual box From the location where the VM is stored, double click the file ...
So after the installation of the 2 component and following the above guide, you can run OpenIoT properly and without problems...
Hope your problem be resolved by this guide.
From: anandmahato29 notifications@github.com Sent: Monday, September 19, 2016 9:18 AM To: OpenIotOrg/openiot Cc: 9Khaled9; State change Subject: Re: [OpenIotOrg/openiot] Unable to register Sensor. Please check LSM configuration in openiot.properties (#121)
Have you found any solution because i am have same problem. Please help i am stuck...
You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHubhttps://github.com/OpenIotOrg/openiot/issues/121#issuecomment-247917781, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ARlXX_qtUezlIIZ21jjgIwzhf5ZoRxnrks5qrilTgaJpZM4IWMNl.
Hello guys, i can not register a Sensor Type, noting that my user (openiot) has the schemaEditor Default-Role... can any one help me???
schemaEditor Default-Role:
Error: