[kRO] support (main, sakray, zero)

[alisonrag]

plugin is required to get OTP ( kRO_auth ) this plugin only run under openkore.pl

this pull closes #3580

[alisonrag]

Plugin added to Openkore, but because of 'https' the perl is still required

[ya4ept]

Need to check this patch: #3517

[lemonC-C]

Help..T_T

The error message is: don't forget to add kRO_auth plugin to sys.txt https://openkore.com/wiki/loadPlugins_list

I tried it as it was on the wiki, but it didn't work.

[cocoa106]

@alisonrag It looks like it hasn't been merged into the master branch. Still having problems? When the kRO_auth plugin is used in the kRO-support branch and the start.exe file is executed, the following error message appears.

"Error in First Request. Status: 501 Protocol scheme 'https' is not supported (LWP::Protocol::https not installed)"

I have installed strawberry-perl version 5.32.1 (windows 10 64bit)

I hope that kRO can also be used normally. Thank you for your efforts.

[alisonrag]

@alisonrag It looks like it hasn't been merged into the master branch. Still having problems? When the kRO_auth plugin is used in the kRO-support branch and the start.exe file is executed, the following error message appears.

"Error in First Request. Status: 501 Protocol scheme 'https' is not supported (LWP::Protocol::https not installed)"

I have installed strawberry-perl version 5.32.1 (windows 10 64bit)

I hope that kRO can also be used normally. Thank you for your efforts.

its working fine just use strawberry perl 5.32 32 bits, replace the netredirect.dll and xstools.dll using this link (https://github.com/OpenKore/openkore/suites/8534459744/artifacts/380705255) and run using openkore.pl

[cocoa106]

@alisonrag As you said, I have confirmed that the bot works normally. thank you! However, after the bot has been hunting for about a minute, the connection with the map server is cut off. To solve this, I tried to create a new recvpackets.txt file with the ragexe.exe file referring to the manual, but it was impossible. Can you tell me the latest way to extract recvpackets?

[shinji840]

hello, i was able to run a fake poseidon server and ro client on computer1, and i ran openkore on computer2(vmware) and i still get this error. where should i check first to troubleshoot this?

[alisonrag]

hello, i was able to run a fake poseidon server and ro client on computer1, and i ran openkore on computer2(vmware) and i still get this error. where should i check first to troubleshoot this?

Gravity added cloudflare protection to login. openkore can't get the token, because cloudflare check if the client can run javascript and perl cant

[KimK-Hack]

Gravity는 로그인에 cloudflare 보호 기능을 추가했습니다.

Then you can't use the Korean server at all?

[KimK-Hack]

@alisonrag

Poseidon 서버에 연결할 수 없으며 ragexe.exe 매개 변수 또는 posidon.xml 자체를 잘못 설정했다고 생각합니다. 도움을 요청할 수 있습니까?

또한 poseidon 서버 구성 안내서와 같이 data.grf 파일에서 clientinfo.xml을 열면 아무 작업도 수행하지 않으면 많이 볼 수 없습니다

한국서버 아예 안되는걸로 알고있습니다. 혹시나 되시면 연락주세요!

[sctnightcore]

@alisonrag Poseidon 서버에 연결할 수 없으며 ragexe.exe 매개 변수 또는 posidon.xml 자체를 잘못 설정했다고 생각합니다. 도움을 요청할 수 있습니까? 또한 poseidon 서버 구성 안내서와 같이 data.grf 파일에서 clientinfo.xml을 열면 아무 작업도 수행하지 않으면 많이 볼 수 없습니다

한국서버 아예 안되는걸로 알고있습니다. 혹시나 되시면 연락주세요!

English pls

[LycorisRecoil-NishikigiChisato]

@alisonrag

Poseidon 서버에 연결할 수 없으며 ragexe.exe 매개 변수 또는 posidon.xml 자체를 잘못 설정했다고 생각합니다. 도움을 요청할 수 있습니까?

또한 poseidon 서버 구성 안내서와 같이 data.grf 파일에서 clientinfo.xml을 열면 아무 작업도 수행하지 않으면 많이 볼 수 없습니다

한국서버 아예 안되는걸로 알고있습니다. 혹시나 되시면 연락주세요!

English pls

As far as I know, Korean servers don't work at all. Please contact me if you have any chance!