Open peternewman opened 5 months ago
I've assumed you're on Linux, but please can you just confirm?
Can you also try the test again with all other plugins disabled and see if the same thing happens?
Please can you share your config.log please and probably a bit more of the olad -l 4 log before the device is hotplugged.
Probably dmesg logs too for good measure.
Possibly related: https://github.com/libusb/libusb/issues/601 https://github.com/libusb/libusb/issues/299
As a side note, I've discovered that the Eurolite only works when it is already present when ola starts. If I insert it later, I get this log:
So somehow the
libusb_get_string_descriptor_ascii
fails and the device information including serial is therefore not known to OLA, causing it to not be recognized. This is not a new issue caused by the serial id check; it also doesn't work with the old method of settingenable_eurolite_mk2=true
, as that results in:All works fine when the usb device is connected beforehand.
Originally posted by @aroffringa in https://github.com/OpenLightingProject/ola/issues/1932#issuecomment-1925657998