[x] Re-work libraries to only have one instance and relative paths
[x] Update the GitHub action to work again (Closes #55)
[x] Rename "rp2040-dongle" to "rp2040-dmxsun" in silkscreen and references
[x] Add new logo somewhere on silkscreen
[x] Make sure all boards are DRC and ERC okay (+3V3 net might have been renamed with the migration)
[X] Remove I2C pull-ups? Need to verify locally if the rp2040 pull-ups are fine without external ones before => They are required. According to measurements done and according to the data sheet of the RP2040 as well
[x] Add an extra i2C connector (grove? Qwiic?) to the board so that peripherals such as OLEDs or LCDs can be attached easily (Closes #30)
[x] Maybe add some way to add an Ethernet board easily? See #29 , mainly the ENC28J60 based boards
[x] Additional caps for buffering the power supply lines, especially close to the nRF24 and the IO boards
[x] Make sure the 5-pin-XLR NC3FD sockets on the IOBoards actually fit! (Closes #24)
[x] Add a base board with fewer slots (Closes #28)
Currently a draft to track ToDos:
Remove I2C pull-ups? Need to verify locally if the rp2040 pull-ups are fine without external ones before=> They are required. According to measurements done and according to the data sheet of the RP2040 as well5-pin-XLRNC3FD sockets on the IOBoards actually fit! (Closes #24)