Open zaggynl opened 7 years ago
Would need to see the output from sensors command to see what sensors you have and if they are supported.
root@openmediavault:/etc/monit# sensors w83627hf-isa-0a00 Adapter: ISA adapter in0: +4.08 V (min = +0.00 V, max = +4.08 V) in1: +4.08 V (min = +0.00 V, max = +4.08 V) in2: +4.08 V (min = +2.82 V, max = +3.79 V) ALARM in3: +3.04 V (min = +4.08 V, max = +3.79 V) ALARM in4: +3.09 V (min = +4.08 V, max = +4.08 V) ALARM in5: +3.12 V (min = +4.08 V, max = +3.06 V) ALARM in6: +3.17 V (min = +4.08 V, max = +4.08 V) ALARM in7: +3.33 V (min = +4.08 V, max = +1.12 V) ALARM in8: +3.26 V (min = +4.08 V, max = +2.03 V) ALARM fan1: 0 RPM (min = 0 RPM, div = 8) fan2: 0 RPM (min = 1328 RPM, div = 8) ALARM fan3: 0 RPM (min = 2033 RPM, div = 8) ALARM temp1: -48.0°C (high = -1.0°C, hyst = -1.0°C) sensor = thermistor temp2: -48.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor temp3: -48.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor cpu0_vid: +1.419 V beep_enable: enabled
coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +79.0°C, crit = +89.0°C) Core 1: +34.0°C (high = +79.0°C, crit = +89.0°C) Core 2: +35.0°C (high = +79.0°C, crit = +89.0°C) Core 8: +33.0°C (high = +79.0°C, crit = +89.0°C) Core 9: +34.0°C (high = +79.0°C, crit = +89.0°C) Core 10: +32.0°C (high = +79.0°C, crit = +89.0°C)
w83795adg-i2c-0-2f Adapter: SMBus I801 adapter at 0400 in0: +1.21 V (min = +0.60 V, max = +1.49 V) in1: +0.95 V (min = +0.60 V, max = +1.49 V) in2: +1.52 V (min = +1.35 V, max = +1.65 V) in3: +1.26 V (min = +1.13 V, max = +1.38 V) in4: +1.83 V (min = +1.63 V, max = +2.00 V) in5: +1.26 V (min = +1.13 V, max = +1.38 V) in6: +1.54 V (min = +1.20 V, max = +1.65 V) in7: +1.54 V (min = +1.20 V, max = +1.65 V) in11: +1.13 V (min = +0.00 V, max = +2.05 V) +3.3V: +3.26 V (min = +2.95 V, max = +3.67 V) 3VSB: +3.27 V (min = +2.95 V, max = +3.67 V) Vbat: +3.20 V (min = +2.95 V, max = +3.67 V) fan1: 2954 RPM (min = 709 RPM) fan2: 3096 RPM (min = 709 RPM) fan3: 3054 RPM (min = 709 RPM) fan4: 0 RPM (min = 709 RPM) ALARM fan5: 0 RPM (min = 709 RPM) ALARM fan6: 0 RPM (min = 709 RPM) ALARM fan7: 0 RPM (min = 709 RPM) ALARM fan8: 0 RPM (min = 709 RPM) ALARM temp1: +70.2°C (high = +85.0°C, hyst = +80.0°C) (crit = +100.0°C, hyst = +95.0°C) sensor = thermal diode temp5: +20.0°C (high = +85.0°C, hyst = +80.0°C) (crit = +75.0°C, hyst = +70.0°C) sensor = thermistor temp7: +45.8°C (high = +95.0°C, hyst = +92.0°C) (crit = +95.0°C, hyst = +92.0°C) sensor = Intel PECI temp8: +50.5°C (high = +95.0°C, hyst = +92.0°C) (crit = +95.0°C, hyst = +92.0°C) sensor = Intel PECI intrusion0: ALARM
coretemp-isa-0001 Adapter: ISA adapter Core 0: +39.0°C (high = +79.0°C, crit = +89.0°C) Core 1: +36.0°C (high = +79.0°C, crit = +89.0°C) Core 2: +33.0°C (high = +79.0°C, crit = +89.0°C) Core 8: +32.0°C (high = +79.0°C, crit = +89.0°C) Core 9: +33.0°C (high = +79.0°C, crit = +89.0°C) Core 10: +32.0°C (high = +79.0°C, crit = +89.0°C)
rm /usr/share/openmediavault/mkconf/sensors
wget -O /usr/share/openmediavault/mkconf/sensors https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/openmediavault-sensors/master/usr/share/openmediavault/mkconf/sensors
chmod +x /usr/share/openmediavault/mkconf/sensors
/usr/share/openmediavault/mkconf/sensors
sh -x /usr/share/openmediavault/mkconf/sensors
Run those commands to update to the latest script, it should get you up and running.
Thanks! Am currently using my OMV test machine to hold a backup, will report back when I can test again.
@cptjhmiller I got the same problem but it doesn't detect any sensors.
Looks like the libary you are using isn't compatible with Ryzen. Also looks like "lm-sensors" is dead. Found this Issue here: https://github.com/groeck/lm-sensors/issues/16 but it is only a copy of the original repo.
# sensors-detect revision $Revision$
# Board: ASUSTeK COMPUTER INC. PRIME X370-PRO
# Kernel: 4.9.0-0.bpo.3-amd64 x86_64
# Processor: AMD Ryzen 7 1700 Eight-Core Processor (23/1/1)
Running in automatic mode, default answers to all questions
are assumed.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found unknown chip with ID 0x8665
(logical device 4 has address 0x290, could be sensors)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Found unknown SMBus adapter 1022:790b at 0000:00:14.0.
Sorry, no supported PCI bus adapters found.
Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x1a
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP400'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1b
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x1a
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP400'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1b
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Next adapter: SMBus PIIX4 adapter port 3 at 0b00 (i2c-2)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x1a
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP400'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1b
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Next adapter: SMBus PIIX4 adapter port 4 at 0b00 (i2c-3)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x1a
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP400'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1b
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
The plugin won't work if lm-sensors does not find anything, unless there is an alternative to lm-sensors then there is nothing I can do.
Are there any alternatives to lm-sensors? Can't find anything.
Hi, You might have a look at this post. I got my monitoring working. Not all values are corrrectly returned bu the most important ones like CPU and MB Temp are OK. I have a Asrock MB350 and a AMD ryzen.
nct6792-isa-0290
Adapter: ISA adapter
in0: +0.40 V (min = +0.00 V, max = +1.74 V)
in1: +0.00 V (min = +0.00 V, max = +0.00 V)
in2: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +0.00 V (min = +0.00 V, max = +0.00 V)
in5: +0.00 V (min = +0.00 V, max = +0.00 V)
in6: +0.95 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.22 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +0.00 V (min = +0.00 V, max = +0.00 V)
in10: +0.11 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.12 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +1.72 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.00 V (min = +0.00 V, max = +0.00 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 1991 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +122.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +26.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +29.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +111.0°C sensor = thermistor
AUXTIN2: +113.0°C sensor = thermistor
AUXTIN3: -128.0°C sensor = thermistor
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
intrusion0: OK
intrusion1: ALARM
beep_enable: disabled
No errors on install/refresh. Ran sensors-detect and sensors, no errors, sensors shows temps/speeds/etc. What logs/commands should I check? Ran:
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 0 -o false = 0 ]
omv_config_get /config/services/sensors/cpufanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpufanenable>
xmlstarlet sel -t -v /config/services/sensors/cpufanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
omv_config_get /config/services/sensors/sysfanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/sysfanenable>
xmlstarlet sel -t -v /config/services/sensors/sysfanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 0 -o false = 0 ]
omv_config_get /config/services/sensors/cpuenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpuenable>
xmlstarlet sel -t -v /config/services/sensors/cpuenable /etc/openmediavault/co nfig.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
omv_config_get /config/services/sensors/mbtemp
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/mbtemp>
xmlstarlet sel -t -v /config/services/sensors/mbtemp /etc/openmediavault/confi g.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
omv_config_get /config/services/sensors/cpufanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpufanenable>
xmlstarlet sel -t -v /config/services/sensors/cpufanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
omv_config_get /config/services/sensors/sysfanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/sysfanenable>
xmlstarlet sel -t -v /config/services/sensors/sysfanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
[ -f /usr/share/openmediavault/mkconf/collectd.d/sensors ]
[ -f /var/www/openmediavault/js/omv/module/admin/diagnostic/system/plugin/Sens ors.js ]
grep -q LoadPlugin sensors /etc/collectd/collectd.conf
sed -i /#\ <<<\ [openmediavault]\ sensors-script/,/#\ >>>\ [openmediavault\ ]\ sensors-script/d /usr/sbin/omv-mkgraph
[ -f /usr/share/openmediavault/mkconf/collectd.d/mb ]
[ -f /var/www/openmediavault/js/omv/module/admin/diagnostic/system/plugin/Mb.j s ]
grep -q LoadPlugin mb /etc/collectd/collectd.conf
sed -i /#\ <<<\ [openmediavault]\ mb-script/,/#\ >>>\ [openmediavault]\ mb -script/d /usr/sbin/omv-mkgraph
[ -f /usr/share/openmediavault/mkconf/collectd.d/fan ]
[ -f /var/www/openmediavault/js/omv/module/admin/diagnostic/system/plugin/Fan. js ]
grep -q LoadPlugin fan /etc/collectd/collectd.conf
sed -i /#\ <<<\ [openmediavault]\ fan-script/,/#\ >>>\ [openmediavault]\ f an-script/d /usr/sbin/omv-mkgraph
[ -f /usr/share/openmediavault/mkconf/collectd.d/sys ]
[ -f /var/www/openmediavault/js/omv/module/admin/diagnostic/system/plugin/Sys. js ]
grep -q LoadPlugin sys /etc/collectd/collectd.conf
sed -i /#\ <<<\ [openmediavault]\ sys-script/,/#\ >>>\ [openmediavault]\ s ys-script/d /usr/sbin/omv-mkgraph
omv_config_get /config/services/sensors/cpuenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpuenable>
xmlstarlet sel -t -v /config/services/sensors/cpuenable /etc/openmediavault/co nfig.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
omv_config_get /config/services/sensors/sysfanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/sysfanenable>
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
omv_config_get /config/services/sensors/cpufanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpufanenable>
xmlstarlet sel -t -v /config/services/sensors/cpufanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
omv_config_get /config/services/sensors/mbtemp
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/mbtemp>
xmlstarlet sel -t -v /config/services/sensors/mbtemp /etc/openmediavault/confi g.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 -o false = 1 -o false = 1 -o false = 1 ]
omv_config_get /config/services/sensors/cpuenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpuenable>
xmlstarlet sel -t -v /config/services/sensors/cpuenable /etc/openmediavault/co nfig.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
[ ! -z ]
omv_config_get /config/services/sensors/mbtemp
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/mbtemp>
xmlstarlet sel -t -v /config/services/sensors/mbtemp /etc/openmediavault/confi g.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
omv_config_get /config/services/sensors/cpufanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpufanenable>
xmlstarlet sel -t -v /config/services/sensors/cpufanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
omv_config_get /config/services/sensors/sysfanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/sysfanenable>
xmlstarlet sel -t -v /config/services/sensors/sysfanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 ]
omv_config_get /config/services/sensors/cpuenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpuenable>
xmlstarlet sel -t -v /config/services/sensors/cpuenable /etc/openmediavault/co nfig.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
omv_config_get /config/services/sensors/mbtemp
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/mbtemp>
xmlstarlet sel -t -v /config/services/sensors/mbtemp /etc/openmediavault/confi g.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
omv_config_get /config/services/sensors/cpufanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/cpufanenable>
xmlstarlet sel -t -v /config/services/sensors/cpufanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
omv_config_get /config/services/sensors/sysfanenable
local _queryresult _rc
omv_debug omv_config_get: xpath=</config/services/sensors/sysfanenable>
xmlstarlet sel -t -v /config/services/sensors/sysfanenable /etc/openmediavault /config.xml
xmlstarlet unesc
_queryresult=false
_rc=0
echo -n false
omv_debug omv_config_get: results: query= cmd=<0>
return 0
[ false = 1 -o false = 1 -o false = 1 -o false = 1 ]
service collectd restart
/usr/sbin/omv-mkgraph
rm -f /var/cache/openmediavault/cache.omv\controlpanel\login_js.json
exit 0 zaggynl@openmediavault:~$