search

OpenNeptune3D / OpenNept4une

Transform your Neptune 4 3D printer with OpenNept4une, a collection of scripts designed to replace the manufacturer's software, reverting to the original open-source projects for enhanced performance, reliability, and features.
GNU General Public License v3.0
363 stars 40 forks source link

Warping since install #209

Closed circsmonky closed 3 months ago

circsmonky commented 3 months ago

Since I put Opennept4ne on my 4Pro I have been getting lots of warping. I wasn't getting it before. I have tried adjusting many settings, even used a raft and it still warped. I bought an enclosure just to make sure it wasn't a draft that started at the same time, still warped in the enclosure. I really like how opennept4ne works so I didn't want to have to go back to stock, but at it stands my printer doesn't print. I'm sure there's some setting that I need to change but I can't figure out what.

halfmanbear commented 3 months ago

What slicer were you using before? You can load your old slicer profile and look in our wiki on how to edit the start gcode.

Then you can see if it's the orca slicer settings causing issue

circsmonky commented 3 months ago

What slicer were you using before? You can load your old slicer profile and look in our wiki on how to edit the start gcode.

Then you can see if it's the orca slicer settings causing issue

I was using orca before, a profile I found on elegoo's discord. I did try that profile a few times but I didn't edit the start gcode, I'll try that tonight and update here.

circsmonky commented 3 months ago

What slicer were you using before? You can load your old slicer profile and look in our wiki on how to edit the start gcode.

Then you can see if it's the orca slicer settings causing issue

i have been hunting all over and i cant find where it tells you how to change the start gcode to match. could you help me locate that?

halfmanbear commented 3 months ago

https://github.com/OpenNeptune3D/OpenNept4une/wiki/Using-other-Slicers-&-Profiles

circsmonky commented 3 months ago

What slicer were you using before? You can load your old slicer profile and look in our wiki on how to edit the start gcode.

Then you can see if it's the orca slicer settings causing issue

Ok, using my old orca profile it's not warping. Should I just stick to that one? Or try and figure out why?

halfmanbear commented 3 months ago

Could you export your old profile and upload it here?

circsmonky commented 3 months ago

Elegoo Neptune 4 Pro (0.4 nozzle).zip thats it

circsmonky commented 3 months ago

Could you export your old profile and upload it here?

I changed all settings in my opennept4ne profile to match the old one and the ON profile works now. There was definitely something in those settings my printer didn't like. I only did that over just using the other one because the other one doesn't always show up when I open orca.