Open ghost opened 6 years ago
IOF Council Meeting Minutes 189 Published
... 20 Report from MC
... 20.2 Print Appendix for ISOM 2017
TH reported on behalf of the MC that the Print Appendix to ISOM 2017 had received very few comments during the consultation period, and after some minor corrections was now ready for approval. Council approved the Print Appendix for publication. ...
Presentations from 18th ICOM now available for downloading as PDFs:
Here is continuous discussion on «ISOM 2017 Appendix 1 – CMYK Printing and Colour Definitions» (PDF)
Here is continuous discussion on «ISOM 2017 Appendix 1 – CMYK Printing and Colour Definitions» (PDF)
That is not so much a discussion but the position of the appendix' author. Even while there was almost no time for discussion after this talk at ICOM 2018, it became obvious that some points in this appendix are quite controversial.
Yep, here is basic visual comparsion of "ISOM 2017" and "ISOM 2017, Appendix 1"
@dg0yt You were at ICOM :open_mouth: I did not connect your face to your online presense. Otherwise I would personally say thank you for your OOMapper efforts! So this online thank you! must do for now :smile: (Sorry for offtopic)
IOF MC finally updated and released "ISOM 2017 Appendix 1" (Version 1, 2019-06-17), including colours for ISOM 2017-2
and ISSprOM 2019
.
Also, released test sheet in OCD11 format (PrintTestSheet_ver20190412_ocd11.ocd
) and instruction for it as PDF (PrintTech2019_Instructions.pdf
).
But when I try open PrintTestSheet_ver20190412_ocd11.ocd
in Mapper unstable-0.9.20190604
it give me next warning message:
Warning
The map import generated warnings.
In line symbol 306.1 'Minor/Seasonal Water Channel': The dash pattern's end length (0.75 mm) cannot be imported correctly. Using 0.625 mm.
In line symbol 103.0 'Help contour': The dash pattern's end length (0.7 mm) cannot be imported correctly. Using 0.625 mm.
In line symbol 509.4 'Narrow Ride': The dash pattern's end length (2 mm) cannot be imported correctly. Using 1.5 mm.
In line symbol 530.4 'Ruin': The dash pattern's end length (0.62 mm) cannot be imported correctly. Using 0.75 mm.
There is a new Appendix. And as I read it there are some slight changes in order of colors.
Just compared updates to ISOM 2017-2 & ISSprOM 2019 colors
NOTE: Those not changed in
ISOM 2017 Appendix 1 CMYK Printing and Colour Definitions (temporary including ISprOM) Version 3.pdf
and defined as previosly.
0_0_0_100
100_0_0_0
0_27_79_0
76_0_91_0
0_56_100_18
(for CMYK+B PMS 471)35_85_0_0
, or use PMS “Purple”Colours IS0M 2017-2.pdf (previous) |
ISOM 2017 Appendix 1 CMYK Printing and Colour Definitions (temporary including ISprOM) Version 3.pdf (actual) |
---|---|
Purple for Course Overprint | Purple 100% (all course planning symbols exept 701, 703, 705, 706, 708, 710,1) |
White for Course Overprint | White (Background to control descriptions and white shade for control numbers) |
All printing colours | |
Black 100% | Black 100% |
Green 100% -Point Feature (optional) | Green 100% (point symbols) |
White for Railway | |
Blue 100% - Line Feature | |
Brown 100% - Line Feature | |
Purple for Course Overprint | Purple 100% (course planning symbols mentioned above) |
Purple 50% | |
Blue 100% | |
Black 100% - Big Buildings | |
Brown 100% - Street Infill (will eventually be changed) | Brown 100% |
Black 100% - Street Middleline | |
Black 65% - Area Feature | |
Black 60% (buildings) | |
Black 50% (tramway) | |
Black 20% - Area Feature | Black 20% (canopy) |
Blue 100% - Area Feature | |
Blue 70% - Area Feature | Blue 70% |
Blue 50% - Area Feature | |
Blue 30% | |
Brown 50% - Area Feature (will eventually be changed) | Brown 50% |
Brown 30% | |
Yellow 100% - Narrow Ride | |
Green 60% - Narrow Ride | Green 60% |
Green 30% - Narrow Ride | Green 30% |
White for Green | |
Yellow 100%/Green 50% | Green 50%+yellow 100% |
Grey 25% - Area Feature | |
Green 100% - Area Feature | Green 100% |
Green 60% - Area Feature | Green 60% |
Green 30% - Area Feature | Green 30% |
Green 100% - Undergrowth | |
White for Yellow | |
Black Cultivated Land | Black 30% (bare rock) |
Yellow 100% | Yellow 100% |
Yellow 75% - Area Feature | |
Yellow 50 - Area Feature | Yellow 50% |
Colours ISSprOM 2019.pdf (previous; draft) |
ISOM 2017 Appendix 1 CMYK Printing and Colour Definitions (temporary including ISprOM) Version 3.pdf (actual) |
---|---|
Upper Purple for Course Overprint | Purple 100% (all course planning symbols exept 701, 703, 705, 706, 708, 710,1) |
White for Course Planning Symbols | White (Background to control descriptions and white shade for control numbers) |
Black 100% | Black 100% |
Green 100% - Point feature | Green 100% (point symbols) |
Lower Purple for Course Planning Symbols | Purple 100% (course planning symbols mentioned above) |
Purple 50% | Purple 50% |
Brown 100% - North Line | |
Blue 100% - Line feature | Blue 100% |
Brown 100% - Line feature | Brown 100% |
Black 60% - Area feature | Black 60% (buildings) |
Black 50% (tramway) | |
Black 20% - Area feature | Black 20% (canopy) |
Blue 100% - Area feature | |
Blue 70% - Area feature | Blue 70% |
Blue 30% - Area feature | Blue 30% |
White for Green/Brown | |
Brown 50% - Area feature(will ev. be changed) | Brown 50% |
Brown 30% (upper)(will ev. be changed) | Brown 30% |
Grey 30% - Area feature | |
Green 50%+yellow 100% | |
Green 100% (reference shade 86_0_91_0 ) |
|
Green 100% - Area feature | |
Yellow 100%/Green 50% | |
Green 60% - Area feature | Green 60% |
Green 30% - Area feature | Green 30% |
Green 100% - Undergrowth | |
White for Yellow | |
Black Cultivated Land | Black 30% (bare rock) |
Yellow 100% - Area feature | Yellow 100% |
Yellow 50% - Area feature | Yellow 50% |
Brown (Area)(will ev. be changed) |
Actual behaviour
IOF published in official blog:
Here is discussion in "Orienteering Mappers Int." group on Facebook
Expected behaviour
Update CMYK values of defined colors in ISOM2017 symbol sets distributed with OpenOrienteering Mapper.
Configuration
Mapper Version: 0.9.x
Operating System: all
References