Finishing a path fails

[dg0yt]

dl3sdo reported on Sourceforge [tickets:#409]:

With the new 0.5.94 (Windows) version, the finishing of an area object fails when trying to finish by either double- or rightclicking. Also closing the objects fails. When the operation fails the previously active symbol becomes active. This behaviour does not happen for path objects except for object type 799 (Simple Orienteering Course).

[dg0yt]

dl3sdo posted on Sourceforge:

Finishing only fails when the operation before was setting point objects:

• set point objects
• now select an area (or line!) symbol
• the 'draw path' tool becomes active
• but as soon as you try to finish your path, the operation fails
• and the 'set point objects' tool becomes active again, together with the previously selected point symbol

A correction to my first post: also the drawing of a path objects fails if the operation before was setting point objects.

[dg0yt]

dl3sdo posted on Sourceforge:

This bug lets Mapper even crash:

• select a point symbol and set a point object
• while this tool is still active select symbol 603.1 (or 105)
• left click in the map window
• press 'Esc'
• Mapper crashes

[dg0yt]

I withdraw the released 0.5.94 binaries but please continue testing.

The problem is not the sequence of tool but the current selection (the last drawn symbol). If there is no selection then there is no problem...

[dg0yt]

• labels: --> tools, Crash
• status: new --> assigned
• assigned_to: Kai Pastor

[dg0yt]

• status: assigned --> fixed

[dg0yt]

• status: fixed --> closed