Add elements from eFTI-model + ID and NetVolumeMeasure to Hazardous Item

areberg commented 11 months ago

Add following elements to cac:HazardousItem:

cbc:Information (Information in eFTI-model)
cbc:TechnicalName (TechnicalName in eFTI-model)
cac:HazardousGoodsTransit/cbc:PackingCriteriaCode (PackagingDangerLevelCode in eFTI-model)
cbc:HazardClassID (HazardousClassificationID in eFTI-model)
cbc:TunnelRestrictionCode (TunnelRestrictionCode in eFTI-model)
cbc:HazardousCategoryCode (HazardousCategoryCode in eFTI-model)
cbc:EmergencyTemperature (EmergencyTemperatureMeasure in eFTI-model)
cbc:NetVolumeMeasure (to sync with other profiles)
cbc:ID (to sync with other profiles)

PeterLBorresen commented 10 months ago

Done - copied from Advanced Depatch Advice

JorgenErlandsson commented 10 months ago

cbc:UNDGCode is set to Mandatory in Waybill - is Optional in ADA. cbc:HazardClassID is set to Mandatory in Waybill - is Optional in ADA. Should be the same in all documents.

Rest is ok.

JorgenErlandsson commented 10 months ago

One more issue - cac:HazardousItem is set to be Mandatory in cac:Item. It should be Optional.

areberg commented 10 months ago

And HazardsousItem is 0..n i ADA.

OpenPEPPOL / logistics-bis

Add elements from eFTI-model + ID and NetVolumeMeasure to Hazardous Item #198