make fails

[Abraxas3d]

Ubuntu 20.04 Vivado 2022.2

Vivado environment variable set OK

(base) abraxas3d@Jacks:~/documentation-friday/pluto_msk/firmware$ which vivado
/tools/Xilinx/Vivado/2022.2/bin/vivado
(base) abraxas3d@Jacks:~/documentation-friday/pluto_msk/firmware$

make fails

DTC     arch/arm/boot/dts/zynq-pluto-sdr-revc.dtb
make[1]: Leaving directory '/home/abraxas3d/documentation-friday/pluto_msk/firmware/linux'
dtc -q -@ -I dtb -O dts linux/arch/arm/boot/dts/zynq-pluto-sdr-revc.dtb | sed 's/axi {/amba {/g' | dtc -q -@ -I dts -O dtb -o build/zynq-pluto-sdr-revc.dtb
rm -Rf build/sdk
unzip -o build/system_top.xsa system_top.bit -d build
unzip:  cannot find or open build/system_top.xsa, build/system_top.xsa.zip or build/system_top.xsa.ZIP.
make: *** [Makefile:185: build/system_top.bit] Error 9
rm linux/arch/arm/boot/dts/zynq-pluto-sdr-revc.dtb linux/arch/arm/boot/dts/zynq-pluto-sdr.dtb linux/arch/arm/boot/dts/zynq-pluto-sdr-revb.dtb

[Abraxas3d]

Deleted repository, attempted again, same error. I attempted it again because the install above required a number of dependencies to be installed along the way, and I wanted to make sure that those installs had not caused some sort of problem.

Here's the error message:

make[1]: Leaving directory '/home/abraxas3d/documentation-vancouver/pluto_msk/firmware/linux'
dtc -q -@ -I dtb -O dts linux/arch/arm/boot/dts/zynq-pluto-sdr-revc.dtb | sed 's/axi {/amba {/g' | dtc -q -@ -I dts -O dtb -o build/zynq-pluto-sdr-revc.dtb
rm -Rf build/sdk
unzip -o build/system_top.xsa system_top.bit -d build
unzip:  cannot find or open build/system_top.xsa, build/system_top.xsa.zip or build/system_top.xsa.ZIP.
make: *** [Makefile:185: build/system_top.bit] Error 9
rm linux/arch/arm/boot/dts/zynq-pluto-sdr-revc.dtb linux/arch/arm/boot/dts/zynq-pluto-sdr.dtb linux/arch/arm/boot/dts/zynq-pluto-sdr-revb.dtb

real    47m18.688s
user    99m25.825s
sys 11m14.176s