Closed theoryshaw closed 9 years ago
Ryan,
Yes, we can do electronic stamping.
Yes, we can send you a set shortly.
Can you use the new logo (attached) in the title block?
Thank you,
Andy Eck, SE, PE
Ntrive – Structural Engineering
Office Number: 630-318-1725 x701
Mobile Number: 630-886-4688
280 Shuman Blvd, Suite 270
Naperville, IL 60563
-Check out our website at: http://ntrive.com/ ntrive.com
From: Ryan Schultz [mailto:notifications@github.com] Sent: Monday, July 6, 2015 2:15 PM To: OpeningDesign/Sports_Complex Cc: Andy Eck Subject: [Sports_Complex] 'Permission to Start' & 'Footing & Foundation Plans Only' (#56)
Hi @andyeck1 https://github.com/andyeck1 ,
Let me know where you are at with your permit drawings. Would like to finalize tomorrow (7/7). Can you please electronic stamp your various sheets?
I'd like to review, if possible, before I submit them.
@tfodden https://github.com/tfodden Is picking up your specification markups.
Thanks Much, Ryan
— Reply to this email directly or view it on GitHub https://github.com/OpeningDesign/Sports_Complex/issues/56 . https://github.com/notifications/beacon/AL66h1F8DF3ULP9K3Btb1QYtqW4BH5ZAks5oastCgaJpZM4FS-YM.gif
Cool. Your attachment doesn't come through on this github issue. Can you upload your logo to github, and i'll add it into the ARCH model, and in turn sync.
Thanks.
So this is for footing and foundation permit? So do you only need the concrete section at this time? TF
@tfodden Yes, I would imagine that's all they would be looking for.
The revised Concrete section (030013OD CONCRETE REV.doc) is in Dropbox\Open\Sports_Complex\Structural.
And in Dropbox\Open\Sports_Complex\Specifications\Division 03
For your use. TF
Thanks, i commited them here: https://github.com/OpeningDesign/Sports_Complex/commit/bf640ef386824b954da77a49f8ef4a0879a391d2
Hi @andyeck1,
Let me know where you are at with your permit drawings. Would like to finalize tomorrow (7/7). Can you please electronic stamp your various sheets?
I'd like to review, if possible, before I submit them.
@tfodden Is picking up your specification markups.
Thanks Much, Ryan