search

Oros42 / IMSI-catcher

This program show you IMSI numbers of cellphones around you.
Creative Commons Zero v1.0 Universal
3.19k stars 731 forks source link

No o/p in hackrf #12

Closed beeprime closed 5 years ago

beeprime commented 7 years ago

Hi, I am using hackrf sdr and upon firing simple_imsi_catcher.py - it gives nothing apart from the first line saying cell_id, country etc...

BlackPhreaker commented 7 years ago

Good afternoon and through wireshark data are viewed ???

beeprime commented 7 years ago

No. Wireshark is up and running but no data are viewed.

BlackPhreaker commented 7 years ago

Not in a script not in Wireshark data does not arrive ??? And the frequency of the GSM channel is configured to rightly try to scan the nearest BTS???

BlackPhreaker commented 7 years ago

Example kal -s GSM900 or gsm_scanner.py Data is given or not ??

Oros42 commented 7 years ago

@beeprime no data in wireshark == wrong frequency

BlackPhreaker commented 7 years ago

@beeprime To determine the channel and frequency of BTS, use the scanner from the package gr-gsm (gsm_scanner.py -v) !!!

beeprime commented 7 years ago

While using RTL2832U in place of Hackrf One, I am getting IMSI numbers. That implies that simple_imsi_catcher is working fine with RTL-SDR but no GSM data is shown in wireshark while it's visible by running airprobe_rtlsdr.py from another console which is other that from where simple_imsi_catcher is running. Please help... (firstly wireshark gives LUA error but after resolving also no data is shown)

BlackPhreaker commented 7 years ago

@beeprime * kal -s GSM 900 displays the result if there is no reinstall the hackrf One software. I have everything in one system working normally RTL2832U, Hackrf One, OsmocomBB... For the sake of interest probyval radio takes ??

Oros42 commented 7 years ago

@beeprime if you have nothing in wireshark, the problem didn't come from my IMSI-catcher. So check :