Closed rumpled closed 1 month ago
This is working correctly - there's a limit of how fast you can insert maxInputOutput
in tank config section. That value is per row and if it's lower than 1 bucket then 1 bucket is used as a minimum. If default of 20 is used then in your case you would get max transfer rate of 200 mB which is lower than 1 bucket so 1 bucket is used as max transfer.
However the other part is that you can use stack upgrades to both increase capacity and with the same multiplier the transfer rate. so with 1 tier 4 upgrade you will get max of 3200 mB per operation here and obviously that gets much higher if you use multiple of stack upgrades.
Describe the bug
Using Refined Storage, trying to automate GT recipe(s) by sending items + fluids into a backpack. The Refined Storage Crafter shows the error "Machine doesn't accept item" if the recipe uses >1B of fluid.
Initial Configuration Started with a basic Backpack with tank upgrade with capacity of 12B. Tested reducing the recipe to 1B, everything is inserted successfully (4 items of various quantities, plus the 1B of fluid).
Other Configurations Netherite Backpack, 2 tank upgrades with capacity of 40B each
Tested with basic Water as well, not just GT fluids.
Expected behavior With 1 tank, any single fluid up to the capacity of the tank should be able to be inserted by a crafter. With 2 tanks, any two fluids up to the capacity of each tank should be able to be inserted by a crafter.
Optional behavior If identical fluid is inserted into each tank, maybe it could be consolidated? Doesn't seem to be a good way to make that deterministic so maybe not.
Screenshots Recipe with 3 buckets fails
Test recipe with 2 buckets succeeds
1 bucket inserted into each tank
Versions This is all on ATM9 0.2.58