Movidius

[3073]

I get my movidius ncs from amazon right now and i need to use it for fast computing ability. model : ssd mobilenet framework: caffe

please show me how to get the ncs work with my pi... I have installed the NCS SDK on my raspberry pi before I received my movidius from amazon carrier using the below link: dependencies like opencv and tensorflow are also installed by default based on the link: https://github.com/movidius/ncsdk

[PINTO0309]

@3073 First of all, i need to confirm to you the following.

1.Is NCSDK 2.05.xx.xx installed? "$ git clone -b ncsdk2 http://github.com/Movidius/ncsdk" 2.Is protobuf version 3.5.1? "$ protoc --version" 3.Is tensorflow version 1.9.0? 4.Is NCAPPZOO done git clone already? "$ git clone -b ncsdk2 https://github.com/movidius/ncappzoo.git"

NCAPPZOO is a sample program repository of NCS. Experience, it will not work properly unless upgraded to tensorflow 1.8.0 or 1.9.0.

[3073]

here is the confirmation for your question.

1. I installed NCSDK 1.x " git clone https://github.com/movidius/ncsdk.git " . it is version 1
2. when I write "protoc --version" on the terminal of RPI , it gives me 3.0.0
3. tensorflow version is 1.7 it is installed by default when version 1 NCS SDK is installed Thank you

[PINTO0309]

@3073 OK. The sample programs of NCSDK v1.0 and v2.0 are not completely compatible. For your environment, please download the program for v1.0 first.

v1.0 https://github.com/movidius/ncappzoo.git https://github.com/PINTO0309/MobileNet-SSD/tree/v1.0 https://github.com/PINTO0309/MobileNet-SSD-RealSense/tree/v1.0

v2.0 https://github.com/movidius/ncappzoo/tree/ncsdk2 https://github.com/PINTO0309/MobileNet-SSD.git https://github.com/PINTO0309/MobileNet-SSD-RealSense

I recommend you read the README firmly. All you have to do is insert the stick into the USB port and execute it.

A sample of the command to generate a graph file from the Caffe model is shown below. $ mvNCCompile aaa.prototxt -w bbb.caffemodel -s 12

[3073]

Thank you. as I understand the procedure is:

1. I first install NCS SDK on my pi
2. then Install NCS SDK ( the same version like what is installed on my pi) on my laptop
3. generate graph file using the trained model weight and prototxt files (for caffe model) on my laptop
4. move the graph file and other pyhton file to the RPI
5. insert the Movidius on the USB port of the RPI and execute the code
6. then have fun with the accelerated computing of Movidius please correct me thank you again

[PINTO0309]

@3073 That's right! All flows look correctly.

[3073]

Thanks bro ... thanks for real ....

On Thu, Aug 9, 2018 at 4:21 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 That's right! All flows look correctly.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-411724620, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdabaQXhIX1puRZ2xWTYgK_pXLxFIks5uPBsqgaJpZM4Vzdvg .

[3073]

git clone https://github.com/movidius/ncsdk.git does not work . I think the repository is closed temporarly. Do you know any other link for cloning ncsdk ?

[PINTO0309]

@3073 First of all, I recommend that you check the NCS Forum. https://ncsforum.movidius.com/discussion/1053/ncsdk-on-github-is-going-opensource-current-software-releases-moved-temporarily

[3073]

[Error 7] Toolkit Error: USB Failure. Code: No devices found

what do you think this error is for when " make examples" is executed on the terminal?

On Fri, Aug 10, 2018 at 12:38 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 First of all, we recommend that you check the NCS Forum. https://ncsforum.movidius.com/discussion/1053/ncsdk-on- github-is-going-opensource-current-software-releases-moved-temporarily

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412002252, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdTlfS7ikMuG8aDhK7_6L1Igxt65sks5uPThqgaJpZM4Vzdvg .

[3073]

frequently it gives a sound like when a flash is inserted in a computer ; connection and disconnection sound. may be USB port is not compatible? but still make install is running with the error [Error 7] Toolkit Error: USB Failure. Code: No devices found

On Fri, Aug 10, 2018 at 10:34 AM, Amare Mahtsentu a.mahtsentu@gmail.com wrote:

[Error 7] Toolkit Error: USB Failure. Code: No devices found

what do you think this error is for when " make examples" is executed on the terminal?

On Fri, Aug 10, 2018 at 12:38 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 First of all, we recommend that you check the NCS Forum. https://ncsforum.movidius.com/discussion/1053/ncsdk-on-githu b-is-going-opensource-current-software-releases-moved-temporarily

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412002252, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdTlfS7ikMuG8aDhK7_6L1Igxt65sks5uPThqgaJpZM4Vzdvg .

[3073]

make examples. sorry

On Fri, Aug 10, 2018 at 10:44 AM, Amare Mahtsentu a.mahtsentu@gmail.com wrote:

frequently it gives a sound like when a flash is inserted in a computer ; connection and disconnection sound. may be USB port is not compatible? but still make install is running with the error [Error 7] Toolkit Error: USB Failure. Code: No devices found

On Fri, Aug 10, 2018 at 10:34 AM, Amare Mahtsentu a.mahtsentu@gmail.com wrote:

[Error 7] Toolkit Error: USB Failure. Code: No devices found

what do you think this error is for when " make examples" is executed on the terminal?

On Fri, Aug 10, 2018 at 12:38 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 First of all, we recommend that you check the NCS Forum. https://ncsforum.movidius.com/discussion/1053/ncsdk-on-githu b-is-going-opensource-current-software-releases-moved-temporarily

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412002252, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdTlfS7ikMuG8aDhK7_6L1Igxt65sks5uPThqgaJpZM4Vzdvg .

[PINTO0309]

@3073

https://ncsforum.movidius.com/search?Search=make+examples https://ncsforum.movidius.com/search?Search=virtualbox https://ncsforum.movidius.com/discussion/948/procedure-for-make-examples-ncsdk-v2-05-00-02-raspberrypi3-raspbian-stretch-ubuntu16-04#latest

Is there one stick? Are you using "USB Hub"? Are you using Virtualbox?

[3073]

1. yes I am using one movidius device ( if you mean that)
2. no I directly connected the movidius stick to the usb port of my computer
3. yes I am using virtualbox (ubuntu 16.04 installed)

by the way kepping the error I just proceed and run make examples and finally generate the graph file. but when I try to connect the movidius to the RPI the detection speed is like the previous...may be i have to install latest version of SDK.

On Fri, Aug 10, 2018 at 2:30 PM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073

https://ncsforum.movidius.com/search?Search=make+examples https://ncsforum.movidius.com/search?Search=virtualbox https://ncsforum.movidius.com/discussion/948/procedure-for- make-examples-ncsdk-v2-05-00-02-raspberrypi3-raspbian- stretch-ubuntu16-04#latest

Is there one stick? Are you using "USB Hub"? Are you using Virtualbox?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412211773, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdcyEECn_jUprHPabPwa6_qhaTzwvks5uPftegaJpZM4Vzdvg .

[PINTO0309]

@3073 OK. Intel admits that using Virtualbox has problems. Long ago, I succeeded in running Virtualbox with NCSDK 1.12.xx, but there are only articles in Japanese. If you really want to try it with Virtualbox, please carefully read the English articles I presented earlier.

but when I try to connect the movidius to the RPI the detection speed is like the previous...

Are you using the program of my Github repository?

[3073]

Thank you for real no I am using a program of my own. ok let me dig for some time and came back

On Fri, Aug 10, 2018 at 3:50 PM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 OK. Intel admits that using Virtualbox has problems. Long ago, I succeeded in running Virtualbox with NCSDK 1.12.xx, but there are only articles in Japanese. If you really want to try it with Virtualbox, please carefully read the English articles I presented earlier.

but when I try to connect the movidius to the RPI the detection speed is like the previous... Are you using the program of my repository?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412226163, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdeiP0RxOTsbcWRWmC4-roxF9cWppks5uPg5RgaJpZM4Vzdvg .

[3073]

I just proceed with the error I told you before ( [Error 7] Toolkit Error: USB Failure. Code: No devices found) and generate the graph file (with no error; I do not know if that is normal with the " no devices found error"). and when I try to execute a file on my Pi it throws the following error. AttributeError: 'module' object has no attribute 'Enumerate_devices' do you think I should install ubuntu along side windows instead of using virtualbox for ubuntu installation will fix the problem? what about installing version two SDK ?

On Fri, Aug 10, 2018 at 9:46 PM, Amare Mahtsentu a.mahtsentu@gmail.com wrote:

Thank you for real no I am using a program of my own. ok let me dig for some time and came back

On Fri, Aug 10, 2018 at 3:50 PM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 OK. Intel admits that using Virtualbox has problems. Long ago, I succeeded in running Virtualbox with NCSDK 1.12.xx, but there are only articles in Japanese. If you really want to try it with Virtualbox, please carefully read the English articles I presented earlier.

but when I try to connect the movidius to the RPI the detection speed is like the previous... Are you using the program of my repository?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412226163, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdeiP0RxOTsbcWRWmC4-roxF9cWppks5uPg5RgaJpZM4Vzdvg .

[PINTO0309]

@3073 I am taking a nap and I got up now. Japan is now 17: 00.

AttributeError: 'module' object has no attribute 'Enumerate_devices'

You Installed → NCSDK v2.05.xx Probably, Your smaple program version → NCSDK v1.12.xx Since NCSDK v2.05 has greatly changed API specifications, errors are displayed.

do you think I should install ubuntu along side windows instead of using virtualbox for ubuntu installation will fix the problem?

It is not recommended to use Virtualbox so that it is unstable and slow in operation.

what about installing version two SDK ?

That is probably the correct answer.

[PINTO0309]

@3073 Sorry. You Installed → NCSDK v2.05.xx Probably, Your smaple program version → NCSDK v1.12.xx

[3073]

Ethiopia is now 6 ( in the middle of the day). by the way Asians are smart in electronics... by the way how do you know whether a program is ncsdk version 1 or 2? do you mean mean if I installed version 1 NCSDK on my laptop to generate graph file, that graph file is of the version 1. Therefore to use the graph in Pi for detection with movidius, I should have install NCSDK version 1 on my Pi because the graph is generated in a version 1 NCSDK installed pc?

On Sat, Aug 11, 2018 at 1:14 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 Sorry. You Installed → NCSDK v2.05.xx Probably, Your smaple program version → NCSDK v1.12.xx

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412259851, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdW0CKtibzWOwI2tUhWUmDdI7gFfZks5uPpJ1gaJpZM4Vzdvg .

[PINTO0309]

@3073

by the way how do you know whether a program is ncsdk version 1 or 2?

You need to see a part of the program. It distinguis between uppercase and lowercase letters. For example,

v2.xx.xx program https://github.com/PINTO0309/MobileNet-SSD/blob/v2.0/MultiStickSSD.py

mvnc.global_set_option(mvnc.GlobalOption.RW_LOG_LEVEL, 2)
devices = mvnc.enumerate_devices()

v1.xx.xx program https://github.com/PINTO0309/MobileNet-SSD/blob/v1.0/MultiStickSSD.py

mvnc.SetGlobalOption(mvnc.GlobalOption.LOG_LEVEL, 2)
devices = mvnc.EnumerateDevices()

do you mean mean if I installed version 1 NCSDK on my laptop to generate graph file, that graph file is of the version 1. Therefore to use the graph in Pi for detection with movidius, I should have install NCSDK version 1 on my Pi because the graph is generated in a version 1 NCSDK installed pc?

Now, the program you are trying to run with RaspberryPi is compatible with NCSDK v1. However, looking at the error message, RaspberryPi seems to have NCSDK v2 installed.

Recommended steps (1)

Your Ubuntu PC:
1. Uninstall NCSDK v1
2. Install NCSDK v2
3. Make graph file by NCSDK v2
4. Copy graph file to RaspberryPi

Your RaspberryPi:
1. Create a sample program for v2.
2. Sample Program execution.

Or below.

Recommended steps (2)

Your Ubuntu PC:
1. Make graph file by NCSDK v1
2. Copy graph file to RaspberryPi

Your RaspberryPi:
1. Uninstall NCSDK v2
2. Install NCSDK v1
3. Create a sample program for v1.
4. Sample Program execution.

[3073]

. thank you guys I will be into it.... Caffe, tesorflow will be installed by default in NCSDK v2?

On Sat, Aug 11, 2018 at 3:23 AM, PINTO notifications@github.com wrote:

by the way how do you know whether a program is ncsdk version 1 or 2?

You need to see a part of the program. It distinguis between uppercase and lowercase letters. For example,

v2.xx.xx program https://github.com/PINTO0309/MobileNet-SSD/blob/v2.0/MultiStickSSD.py

mvnc.global_set_option(mvnc.GlobalOption.RW_LOG_LEVEL, 2) devices = mvnc.enumerate_devices()

v1.xx.xx program https://github.com/PINTO0309/MobileNet-SSD/blob/v1.0/MultiStickSSD.py

mvnc.SetGlobalOption(mvnc.GlobalOption.LOG_LEVEL, 2) devices = mvnc.EnumerateDevices()

do you mean mean if I installed version 1 NCSDK on my laptop to generate graph file, that graph file is of the version 1. Therefore to use the graph in Pi for detection with movidius, I should have install NCSDK version 1 on my Pi because the graph is generated in a version 1 NCSDK installed pc?

Now, the program you are trying to run with RaspberryPi is compatible with NCSDK v1. However, looking at the error message, RaspberryPi seems to have NCSDK v2 installed.

Recommended steps (1)

Your Ubuntu PC:

1. Uninstall NCSDK v1
2. Install NCSDK v2
3. Make graph file by NCSDK v2
4. Copy graph file to RaspberryPi

Your RaspberryPi:

1. Uninstall NCSDK v1
2. Install NCSDK v2
3. Create a sample program for v2.
4. Sample Program execution.

Or below.

Recommended steps (2)

Your Ubuntu PC:

1. Make graph file by NCSDK v1
2. Copy graph file to RaspberryPi

Your RaspberryPi:

1. Uninstall NCSDK v2
2. Install NCSDK v1
3. Create a sample program for v1.
4. Sample Program execution.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412266121, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgda6FfaSsQpDmyfPyy8zU2_kCVe-cks5uPrCRgaJpZM4Vzdvg .

[3073]

how to uninstall NCSDK? make clean will work?

On Sat, Aug 11, 2018 at 3:28 AM, Amare Mahtsentu a.mahtsentu@gmail.com wrote:

. thank you guys I will be into it.... Caffe, tesorflow will be installed by default in NCSDK v2?

On Sat, Aug 11, 2018 at 3:23 AM, PINTO notifications@github.com wrote:

by the way how do you know whether a program is ncsdk version 1 or 2?

You need to see a part of the program. It distinguis between uppercase and lowercase letters. For example,

v2.xx.xx program https://github.com/PINTO0309/MobileNet-SSD/blob/v2.0/MultiStickSSD.py

mvnc.global_set_option(mvnc.GlobalOption.RW_LOG_LEVEL, 2) devices = mvnc.enumerate_devices()

v1.xx.xx program https://github.com/PINTO0309/MobileNet-SSD/blob/v1.0/MultiStickSSD.py

mvnc.SetGlobalOption(mvnc.GlobalOption.LOG_LEVEL, 2) devices = mvnc.EnumerateDevices()

do you mean mean if I installed version 1 NCSDK on my laptop to generate graph file, that graph file is of the version 1. Therefore to use the graph in Pi for detection with movidius, I should have install NCSDK version 1 on my Pi because the graph is generated in a version 1 NCSDK installed pc?

Now, the program you are trying to run with RaspberryPi is compatible with NCSDK v1. However, looking at the error message, RaspberryPi seems to have NCSDK v2 installed.

Recommended steps (1)

Your Ubuntu PC:

1. Uninstall NCSDK v1
2. Install NCSDK v2
3. Make graph file by NCSDK v2
4. Copy graph file to RaspberryPi

Your RaspberryPi:

1. Uninstall NCSDK v1
2. Install NCSDK v2
3. Create a sample program for v2.
4. Sample Program execution.

Or below.

Recommended steps (2)

Your Ubuntu PC:

1. Make graph file by NCSDK v1
2. Copy graph file to RaspberryPi

Your RaspberryPi:

1. Uninstall NCSDK v2
2. Install NCSDK v1
3. Create a sample program for v1.
4. Sample Program execution.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412266121, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgda6FfaSsQpDmyfPyy8zU2_kCVe-cks5uPrCRgaJpZM4Vzdvg .

[PINTO0309]

@3073

Caffe, tesorflow will be installed by default in NCSDK v2?

Yes. But there are notes. Tesorflow 1.7.0 installed by default is very unstable. I recommend that you uninstall it once and then install tensorflow 1.9.0.

$ sudo pip3 uninstall tensorflow
$ sudo apt install libatlas-base-dev
$ sudo pip3 install tensorflow

how to uninstall NCSDDK?

$ cd ~/ncsdk
$ make uninstall

[3073]

the most interesting part of you is you never try to blame for asking you many times..... thank you bro..... I get it

On Sat, Aug 11, 2018 at 3:37 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073

Caffe, tesorflow will be installed by default in NCSDK v2?

Yes. But there are notes. Tesorflow 1.7.0 installed by default is very unstable. I recommend that you uninstall it once and then install tensorflow 1.9.0.

$ sudo pip3 uninstall tensorflow $ sudo apt install libatlas-base-dev $ sudo pip3 install tensorflow

how to uninstall NCSDDK?

$ cd ~/ncsdk $ make uninstall

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412266862, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdZHqNRG4uVSkLpqXajiNs2IQ06V1ks5uPrPrgaJpZM4Vzdvg .

[3073]

I am not lucky with this tiny device bro. I should have switch off from the virtual machine and try it on ubuntu by installing ubuntu alongside my windows 7 laptop.

it throws error in make examples

** WARNING: using empty weights **

On Sat, Aug 11, 2018 at 3:39 AM, Amare Mahtsentu a.mahtsentu@gmail.com wrote:

the most interesting part of you is you never try to blame for asking you many times..... thank you bro..... I get it

On Sat, Aug 11, 2018 at 3:37 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073

Caffe, tesorflow will be installed by default in NCSDK v2?

Yes. But there are notes. Tesorflow 1.7.0 installed by default is very unstable. I recommend that you uninstall it once and then install tensorflow 1.9.0.

$ sudo pip3 uninstall tensorflow $ sudo apt install libatlas-base-dev $ sudo pip3 install tensorflow

how to uninstall NCSDDK?

$ cd ~/ncsdk $ make uninstall

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412266862, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdZHqNRG4uVSkLpqXajiNs2IQ06V1ks5uPrPrgaJpZM4Vzdvg .

[PINTO0309]

@3073 I will reply to tomorrow. Because it is 2 am now. But please tell me the following.

1. Will not the situation change when I insert and remove Stick once?
2. Can you post the full text of "make examples"?

Good night...

[3073]

ame@ame-VirtualBox:~/Downloads/ncsdk-2.05.00.02$ make examples ./install-opencv.sh OpenCV Installation Starting Reading installer configuration variables from ./ncsdk.conf Installing opencv python for non-Raspbian Collecting opencv-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/6a/c8/32023281fc27b787f966a33b8ae946b0f3491062e8b1f1e48029f0269a0d/opencv_python-3.4.2.17-cp35-cp35m-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python3.5/dist-packages (from opencv-python>=3.4.0.12) Installing collected packages: opencv-python Successfully installed opencv-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Collecting opencv-contrib-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/af/8d/982e0d670dcaa588242d4889814c09b137fbc62bc57df9fbf490ab6c9b24/opencv_contrib_python-3.4.2.17-cp35-cp35m-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python3.5/dist-packages (from opencv-contrib-python>=3.4.0.12) Installing collected packages: opencv-contrib-python Successfully installed opencv-contrib-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Collecting opencv-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/60/6a/dcc146a95bc8bde469958ee3ae693a8721798c5f9da7ea58e5a580754610/opencv_python-3.4.2.17-cp27-cp27mu-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python2.7/dist-packages (from opencv-python>=3.4.0.12) Installing collected packages: opencv-python Successfully installed opencv-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Collecting opencv-contrib-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/8c/6a/e7e6328cad323e0b39a9d72a24906341f1593b1c67b985e2d422bc335e37/opencv_contrib_python-3.4.2.17-cp27-cp27mu-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python2.7/dist-packages (from opencv-contrib-python>=3.4.0.12) Installing collected packages: opencv-contrib-python Successfully installed opencv-contrib-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. OpenCV Installation Finished

make examples starting. (cd examples; make) make[1]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples' make -C apps/. make[2]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps' make -C hello_ncs_py/. make[3]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps/hello_ncs_py' nothing to make, use 'make run' to run. make[3]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps/hello_ncs_py' make -C multistick_cpp/. make[3]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps/multistick_cpp'

making googlenet (cd ../../caffe/GoogLeNet; make compile; cd ../../apps/multistick_cpp; cp ../../caffe/GoogLeNet/graph ./googlenet.graph;) make[4]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/caffe/GoogLeNet'

making prereqs (cd ../../data/ilsvrc12; make) make[5]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/data/ilsvrc12' make[5]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/data/ilsvrc12'

making prototxt Prototxt file already exists

making caffemodel caffemodel file already exists

making compile mvNCCompile -w bvlc_googlenet.caffemodel -s 12 deploy.prototxt /usr/local/bin/ncsdk/Controllers/Parsers/TensorFlowParser/Convolution.py:44: SyntaxWarning: assertion is always true, perhaps remove parentheses? assert(False, "Layer type not supported by Convolution: " + obj.type) mvNCCompile v02.00, Copyright @ Intel Corporation 2017

Layer inception_3b/1x1 forced to im2col_v2, because its output is used in concat /usr/local/bin/ncsdk/Controllers/FileIO.py:65: UserWarning: You are using a large type. Consider reducing your data sizes for best performance Blob generated make[4]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/caffe/GoogLeNet'

making squeezenet (cd ../../caffe/SqueezeNet; make compile; cd ../../apps/multistick_cpp; cp ../../caffe/SqueezeNet/graph ./squeezenet.graph;) make[4]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/caffe/SqueezeNet'

making prereqs (cd ../../data/ilsvrc12; make) make[5]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/data/ilsvrc12' make[5]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/data/ilsvrc12' LICENSE file already exists

making prototxt Prototxt file already exists

making caffemodel caffemodel file already exists

making compile mvNCCompile -w squeezenet_v1.0.caffemodel -s 12 deploy.prototxt /usr/local/bin/ncsdk/Controllers/Parsers/TensorFlowParser/Convolution.py:44: SyntaxWarning: assertion is always true, perhaps remove parentheses? assert(False, "Layer type not supported by Convolution: " + obj.type) mvNCCompile v02.00, Copyright @ Intel Corporation 2017

/usr/local/bin/ncsdk/Controllers/FileIO.py:65: UserWarning: You are using a large type. Consider reducing your data sizes for best performance Blob generated make[4]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/caffe/SqueezeNet'

making multistick_cpp cp googlenet.graph cpp/googlenet.graph; cp squeezenet.graph cpp/squeezenet.graph; g++ cpp/multistick.cpp -o cpp/multistick_cpp -lmvnc Created cpp/multistick_cpp executable make[3]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps/multistick_cpp' make -C hello_ncs_cpp/. make[3]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps/hello_ncs_cpp'

making hello_ncs_cpp g++ cpp/hello_ncs.cpp -o cpp/hello_ncs_cpp -lmvnc Created cpp/hello_ncs_cpp executable make[3]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps/hello_ncs_cpp' make[2]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/apps' make -C caffe/. make[2]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/caffe' make -C AlexNet make[3]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/caffe/AlexNet'

making prereqs (cd ../../data/ilsvrc12; make) make[4]: Entering directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/data/ilsvrc12' make[4]: Leaving directory '/home/ame/Downloads/ncsdk-2.05.00.02/examples/data/ilsvrc12' chmod +x run.py

making prototxt Prototxt file already exists

making profile mvNCProfile deploy.prototxt -s 12 /usr/local/bin/ncsdk/Controllers/Parsers/TensorFlowParser/Convolution.py:44: SyntaxWarning: assertion is always true, perhaps remove parentheses? assert(False, "Layer type not supported by Convolution: " + obj.type) mvNCProfile v02.00, Copyright @ Intel Corporation 2017

** WARNING: using empty weights ** /usr/local/bin/ncsdk/Controllers/FileIO.py:65: UserWarning: You are using a large type. Consider reducing your data sizes for best performance Blob generated USB: Transferring Data... E: [ 0] dispatcherEventReceive:200 dispatcherEventReceive() Read failed -9

E: [ 0] dispatcherEventSend:738 Write failed -9

E: [ 0] dispatcherEventSend:730 Write failed -4

On Sat, Aug 11, 2018 at 10:20 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 I will reply to tomorrow. Because it is 2 am now. But please tell me the following.

1. Will not the situation change when I insert and remove Stick once?
2. Can you post the full text of "make examples"?

Good night...

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412289490, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdZIDprFFiRd3sEuyNrvZdfY_hdahks5uPxJGgaJpZM4Vzdvg .

[3073]

the device name in the USB setting change from movidius Ltd movidius MA2X5X to intel corporation VSP loopback device itself.

On Sat, Aug 11, 2018 at 10:44 AM, Amare Mahtsentu a.mahtsentu@gmail.com wrote:

ame@ame-VirtualBox:~/Downloads/ncsdk-2.05.00.02$ make examples ./install-opencv.sh OpenCV Installation Starting Reading installer configuration variables from ./ncsdk.conf Installing opencv python for non-Raspbian Collecting opencv-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/6a/c8/ 32023281fc27b787f966a33b8ae946b0f3491062e8b1f1e48029f0269a0d /opencv_python-3.4.2.17-cp35-cp35m-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python3.5/dist-packages (from opencv-python>=3.4.0.12) Installing collected packages: opencv-python Successfully installed opencv-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Collecting opencv-contrib-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/af/8d/ 982e0d670dcaa588242d4889814c09b137fbc62bc57df9fbf490ab6c9b24 /opencv_contrib_python-3.4.2.17-cp35-cp35m-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python3.5/dist-packages (from opencv-contrib-python>=3.4.0. 12) Installing collected packages: opencv-contrib-python Successfully installed opencv-contrib-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Collecting opencv-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/60/6a/ dcc146a95bc8bde469958ee3ae693a8721798c5f9da7ea58e5a580754610 /opencv_python-3.4.2.17-cp27-cp27mu-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python2.7/dist-packages (from opencv-python>=3.4.0.12) Installing collected packages: opencv-python Successfully installed opencv-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Collecting opencv-contrib-python>=3.4.0.12 Using cached https://files.pythonhosted.org/packages/8c/6a/ e7e6328cad323e0b39a9d72a24906341f1593b1c67b985e2d422bc335e37 /opencv_contrib_python-3.4.2.17-cp27-cp27mu-manylinux1_x86_64.whl Requirement already satisfied (use --upgrade to upgrade): numpy>=1.11.1 in /usr/local/lib/python2.7/dist-packages (from opencv-contrib-python>=3.4.0. 12) Installing collected packages: opencv-contrib-python Successfully installed opencv-contrib-python-3.4.2.17 You are using pip version 8.1.1, however version 18.0 is available. You should consider upgrading via the 'pip install --upgrade pip' command. OpenCV Installation Finished

make examples starting. (cd examples; make) make[1]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples' make -C apps/. make[2]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps' make -C hello_ncs_py/. make[3]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps/hello_ncs_py' nothing to make, use 'make run' to run. make[3]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps/hello_ncs_py' make -C multistick_cpp/. make[3]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps/multistick_cpp'

making googlenet (cd ../../caffe/GoogLeNet; make compile; cd ../../apps/multistick_cpp; cp ../../caffe/GoogLeNet/graph ./googlenet.graph;) make[4]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/caffe/GoogLeNet'

making prereqs (cd ../../data/ilsvrc12; make) make[5]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/data/ilsvrc12' make[5]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/data/ilsvrc12'

making prototxt Prototxt file already exists

making caffemodel caffemodel file already exists

making compile mvNCCompile -w bvlc_googlenet.caffemodel -s 12 deploy.prototxt /usr/local/bin/ncsdk/Controllers/Parsers/TensorFlowParser/Convolution.py:44: SyntaxWarning: assertion is always true, perhaps remove parentheses? assert(False, "Layer type not supported by Convolution: " + obj.type) mvNCCompile v02.00, Copyright @ Intel Corporation 2017

Layer inception_3b/1x1 forced to im2col_v2, because its output is used in concat /usr/local/bin/ncsdk/Controllers/FileIO.py:65: UserWarning: You are using a large type. Consider reducing your data sizes for best performance Blob generated make[4]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/caffe/GoogLeNet'

making squeezenet (cd ../../caffe/SqueezeNet; make compile; cd ../../apps/multistick_cpp; cp ../../caffe/SqueezeNet/graph ./squeezenet.graph;) make[4]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/caffe/SqueezeNet'

making prereqs (cd ../../data/ilsvrc12; make) make[5]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/data/ilsvrc12' make[5]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/data/ilsvrc12' LICENSE file already exists

making prototxt Prototxt file already exists

making caffemodel caffemodel file already exists

making compile mvNCCompile -w squeezenet_v1.0.caffemodel -s 12 deploy.prototxt /usr/local/bin/ncsdk/Controllers/Parsers/TensorFlowParser/Convolution.py:44: SyntaxWarning: assertion is always true, perhaps remove parentheses? assert(False, "Layer type not supported by Convolution: " + obj.type) mvNCCompile v02.00, Copyright @ Intel Corporation 2017

/usr/local/bin/ncsdk/Controllers/FileIO.py:65: UserWarning: You are using a large type. Consider reducing your data sizes for best performance Blob generated make[4]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/caffe/SqueezeNet'

making multistick_cpp cp googlenet.graph cpp/googlenet.graph; cp squeezenet.graph cpp/squeezenet.graph; g++ cpp/multistick.cpp -o cpp/multistick_cpp -lmvnc Created cpp/multistick_cpp executable make[3]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps/multistick_cpp' make -C hello_ncs_cpp/. make[3]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps/hello_ncs_cpp'

making hello_ncs_cpp g++ cpp/hello_ncs.cpp -o cpp/hello_ncs_cpp -lmvnc Created cpp/hello_ncs_cpp executable make[3]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps/hello_ncs_cpp' make[2]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/apps' make -C caffe/. make[2]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/caffe' make -C AlexNet make[3]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/caffe/AlexNet'

making prereqs (cd ../../data/ilsvrc12; make) make[4]: Entering directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/data/ilsvrc12' make[4]: Leaving directory '/home/ame/Downloads/ncsdk-2. 05.00.02/examples/data/ilsvrc12' chmod +x run.py

making prototxt Prototxt file already exists

making profile mvNCProfile deploy.prototxt -s 12 /usr/local/bin/ncsdk/Controllers/Parsers/TensorFlowParser/Convolution.py:44: SyntaxWarning: assertion is always true, perhaps remove parentheses? assert(False, "Layer type not supported by Convolution: " + obj.type) mvNCProfile v02.00, Copyright @ Intel Corporation 2017

** WARNING: using empty weights ** /usr/local/bin/ncsdk/Controllers/FileIO.py:65: UserWarning: You are using a large type. Consider reducing your data sizes for best performance Blob generated USB: Transferring Data... E: [ 0] dispatcherEventReceive:200 dispatcherEventReceive() Read failed -9

E: [ 0] dispatcherEventSend:738 Write failed -9

E: [ 0] dispatcherEventSend:730 Write failed -4

On Sat, Aug 11, 2018 at 10:20 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 I will reply to tomorrow. Because it is 2 am now. But please tell me the following.

1. Will not the situation change when I insert and remove Stick once?
2. Can you post the full text of "make examples"?

Good night...

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412289490, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdZIDprFFiRd3sEuyNrvZdfY_hdahks5uPxJGgaJpZM4Vzdvg .

[PINTO0309]

@3073 It's a typical problem with Virtualbox. The NCS Forum has reported that the behavior of the USB port is wrong. Please try the following first.

1. USB 1.1 Controller OHCI
2. USB 2.0 Controller EHCI
3. USB 3.0 Controller XHCI

https://ncsforum.movidius.com/discussion/comment/3023/#Comment_3023

Virtualbox is not really recommended. Note that the main sequence of "make examples" is almost over, so you can safely ignore it as it is. If you do not need a sample program.

[3073]

I installed ubuntu alongside with windows ( instead of virtual box) and install NCSDK V2 on both the Pi and Ubuntu. but AttributeError: 'module' object has no attribute 'EnumerateDevices' is still alive

On Sat, Aug 11, 2018 at 5:50 PM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 It's a typical problem with Virtualbox. The NCS Forum has reported that the behavior of the USB port is wrong. Please try the following first.

1. USB 1.1 Controller OHCI
2. USB 2.0 Controller EHCI
3. USB 3.0 Controller XHCI

https://ncsforum.movidius.com/discussion/comment/3023/#Comment_3023

Virtualbox is not really recommended. Note that the main sequence of "make examples" is almost over, so you can safely ignore it as it is. If you do not need a sample program.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412310923, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgdSAg4xtpTMTyfNugKWSFIjt193DQks5uP3vvgaJpZM4Vzdvg .

[3073]

normally I take the weight files from other repo to generate the graph. then I use my own program to execute based on that graph....I think it is normal.

[PINTO0309]

@3073

AttributeError: 'module' object has no attribute 'EnumerateDevices' is still alive

You are running the NCSDK v1 sample program. I do not know what program, but need to rewrite to v2 sample program. Please take a closer look at Recommended steps (1). It is correct that the error is displayed now. If you absolutely want to run the v1 program, it is Recommended steps (2).

Or, a program that simulates the v1 program on v2 is published in ncappzoo, so please try it.

◆ncapi2_shim Contains a shim python file that allows NCAPI v1 applications run with an installation of NCAPI v2. To use the shim do the following to your existing NCAPI v1 program. https://github.com/movidius/ncappzoo/tree/ncsdk2/ncapi2_shim

[PINTO0309]

@3073 ◆Migration https://movidius.github.io/ncsdk/ncapi/python_api_migration.html

[3073]

https://www.pyimagesearch.com/2018/02/19/real-time-object-detection-on-the-raspberry-pi-with-the-movidius-ncs/

I am using the code in this link to test movidius. yes it is version one......whcih line bring the errror? because I have seen for version 2 is also the same some other place.

On Sat, Aug 11, 2018 at 7:23 PM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 ◆Migration https://movidius.github.io/ncsdk/ncapi/python_api_migration.html

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412313865, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgddRmRl2cI6HtcF-ooJ58zrj_gxD4ks5uP5GmgaJpZM4Vzdvg .

[PINTO0309]

@3073 Because it is troublesome to explain, can you use this sample? By the way, it works faster than "pyimagesearch" sample. It is a sample of v2 and It works with usb camera. RealSense is unnecessary.

https://github.com/PINTO0309/MobileNet-SSD-RealSense

◆USB Camera Mode

$ sudo raspi-config
"7.Advanced Options" - "A7 GL Driver" - "G3 Legacy"
$ cd ~/MobileNet-SSD-RealSense
$ python3 MultiStickSSDwithRealSense.py -mod 1 -wd 640 -ht 480

Please replace the graph file with the one you created with confidence.

[3073]

Last time i installed SDK on the pi without problem. but now I am unable to install it . it goes up to 55% and stuck for long time. I am using the links in the link below. https://github.com/movidius/ncsdk

but the SDK link is down and I used the alternative they give.

On Sun, Aug 12, 2018 at 12:00 AM, PINTO notifications@github.com wrote:

@3073 https://github.com/3073 Because it is troublesome to explain, can you use this sample? By the way, it works faster than "pyimagesearch" sample. It is a sample of v2 and It works with usb camera. RealSense is unnecessary.

https://github.com/PINTO0309/MobileNet-SSD-RealSense

$ sudo raspi-config "7.Advanced Options" - "A7 GL Driver" - "G3 Legacy" $ cd ~/MobileNet-SSD-RealSense $ python3 MultiStickSSDwithRealSense.py -mod 1 -wd 640 -ht 480

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412323087, or mute the thread https://github.com/notifications/unsubscribe-auth/AgXgddGjsaShsF7DrS0FBDTVBnGH8Okyks5uP9KpgaJpZM4Vzdvg .

[PINTO0309]

@3073 The points are below.

Extension of the SWAP area is absolutely necessary. It will hang up if not specified.

$ sudo nano /etc/dphys-swapfile

CONF_SWAPSIZE=100
↓
CONF_SWAPSIZE=2048

$ sudo /etc/init.d/dphys-swapfile restart swapon -s

And, "-j1" is necessary. It will hang up if not specified.

$ make -j1

[3073]

things seem fine now with the ncs. but cv2.videocapture is not working. may be there is an error in opencv while make examples?

On 8/12/18, PINTO notifications@github.com wrote:

@3073 Because it is troublesome to explain, can you use this sample? By the way, it works faster than "pyimagesearch" sample. It is a sample of v2 and It works with usb camera. RealSense is unnecessary.

https://github.com/PINTO0309/MobileNet-SSD-RealSense

$ sudo raspi-config
"7.Advanced Options" - "A7 GL Driver" - "G3 Legacy"
$ cd ~/MobileNet-SSD-RealSense
$ python3 MultiStickSSDwithRealSense.py -mod 1 -wd 640 -ht 480

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub: https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412323087

[PINTO0309]

@3073 As I always say, can you trap errors with Try - Except etc? What is the error message displayed?

[3073]

no error. vs = videoCapture(0) while true: retval,frame = vs.read() then frame is always none and retval is always false.

On 8/12/18, PINTO notifications@github.com wrote:

@3073 Because it is troublesome to explain, can you use this sample? By the way, it works faster than "pyimagesearch" sample. It is a sample of v2 and It works with usb camera. RealSense is unnecessary.

https://github.com/PINTO0309/MobileNet-SSD-RealSense

$ sudo raspi-config
"7.Advanced Options" - "A7 GL Driver" - "G3 Legacy"
$ cd ~/MobileNet-SSD-RealSense
$ python3 MultiStickSSDwithRealSense.py -mod 1 -wd 640 -ht 480

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub: https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412323087

[PINTO0309]

@3073 Please post the full text of the following command.

$ sudo ls /dev/video*

[3073]

it works! i download the same new video and it works for the new one.

On 8/12/18, PINTO notifications@github.com wrote:

@3073 Because it is troublesome to explain, can you use this sample? By the way, it works faster than "pyimagesearch" sample. It is a sample of v2 and It works with usb camera. RealSense is unnecessary.

https://github.com/PINTO0309/MobileNet-SSD-RealSense

$ sudo raspi-config
"7.Advanced Options" - "A7 GL Driver" - "G3 Legacy"
$ cd ~/MobileNet-SSD-RealSense
$ python3 MultiStickSSDwithRealSense.py -mod 1 -wd 640 -ht 480

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub: https://github.com/PINTO0309/MobileNet-SSD/issues/3#issuecomment-412323087

[PINTO0309]

@3073 I do not know what happened, but congratulations. I think that I will solve earlier if you ask questions to Adrian of pyimagesearch. I do not want to preach, originally, posts unrelated to the repository are violations of manners.

By the way, a girl 's baby was born on the last day of your last issue.

Please close "issue" if you calm down.

[3073]

Hi. sorry for the late reply. Internet connection was down in my faculty.

By the way I need to be honest with you... i agree that messages unrelated to the repo may have problems based on the terms of conditions. but I have seen a good personality in you and I believe that you will solve my problem and you did it !!! Thank you for that... Normally I Know that I am a little bit retarded in understanding but that is because I am Mechanical engineering professional with no know of computer science. I am studying it right now by my self. so now I would like to beg your permission for asking you questions about raspberry pi and Movidius NCS either on this repo or by any means of communication. at last I do not understand what do you means by the following quote in your previous message? I think that I will solve earlier if you ask questions to Adrian of pyimagesearch. I will close this issue immediately as soon as you reply to this message

[PINTO0309]

@3073 Good morning. I am not angry, so do not worry. Rather, I feel that your "issue" will be of help to other engineers. Actually, I majored in economics. Computer science is not specialized. I just touch the device with my hobbies.

I think that I will solve earlier if you ask questions to Adrian of pyimagesearch.

I think that the sample program you had a problem was a program listed in "pyimage search". Is not it wrong? The blog administrator of "pyimage search" is a person named Adrian. Also, it seems that a bulletin board is prepared for "pyimage search". Regarding the program that Adrian himself created, I thought that asking Adrian questions would solve the problem quickly.