Stuck at PCI configuration begin

[VoidGreatEmperor]

I get stuck on [PCI configuration begin] on my G14 2021. I don't know what to do to fix it. Please tell me if you need anything to supply.

[PIut02]

Try this version: https://github.com/PIut02/ROG-Zephyrus-G14-GA401-Hackintosh/tree/36fbeb5efd2dfe78391487e8c3fa68da47be49da Reminder: Clear NVRAM may be necessary for the changes to take full effect.

[VoidGreatEmperor]

I tried it too before but did not work.

[PIut02]

Have you already enabled Above 4G decoding using the UMAF tool?

[VoidGreatEmperor]

Yes, I did. I also tried npci=0x2000 boot argument

[PIut02]

Try replacing this files under this OC folder: config.zip

[VoidGreatEmperor]

Tried it, no luck.

[PIut02]

Well, what about this: OC. If it still doesn't work, please let me know the configuration you are currently using, such as the SSD and network card (because I don't have the 2021 model), as well as the complete image of the error message.

[ryebread5]

I have the same 2020 model as you, and I also have this error, will try what you have said and let you know if it works.

[VoidGreatEmperor]

This time it is a kernel panic due to NVME. I use an intel AX200 wifi card and an SKHynix NVME SSD.

[PIut02]

Well, as I know, some SKHynix SSDs may have this error. Perhaps you need to replace the SSD to avoid it.

[ryebread5]

Odd, I still get the same error throughout these 3 different versions. I am using everything that comes originally in the zephyrus g14 2020 model, micron ssd & ax200 wifi card.

[PIut02]

Odd, I still get the same error throughout these 3 different versions. I am using everything that comes originally in the zephyrus g14 2020 model, micron ssd & ax200 wifi card.

Bro, I think this is also a problem caused by the SSD. According to Dortania and https://github.com/dortania/bugtracker/issues/192, the Micron 2200V used in the g14 is not on the supported list.

[ryebread5]

So what one do you have? I've got a couple of samsung & kingston ones lying around I will try.

[PIut02]

I am using the Western Digital SN570. It should be noted that some Samsung SSDs also have problems during boot, such as the PM981.

[ryebread5]

I got it fixed & installed it onto a HDD connected to a usb to sata adapter. it was so slow, so the problem is the SSD that doesn't work. Thanks for your work. :)