search

PLCHome / node-red-contrib-velux

Provides nodes to talk to Velux® KLF-200 io-homecontrol® Gateway
9 stars 2 forks source link

Velux Error: Can't get scene list #4

Closed giannicattoni closed 5 years ago

giannicattoni commented 5 years ago

I configured the node and there are no connection errors. My windows are not displayed in the drop-down menu. It would be nice to have an example.

Many thanks Gianni

PLCHome commented 5 years ago

Do you see the nodes (devices) in the velux-nodes node? Did you save scene in the KLF-200 and did you see them in the KLF-200? Scenes can also be stored in a KLR 200. These must first be imported into the KLF200.

I have problems with Firefox. grafik Please use chrome. grafik

you can test the list via the browser {your node red adress}/velux/scenes or {your node red adress}/velux/ nodes for the nodes

grafik

grafik

giannicattoni commented 5 years ago

Thank's for your answer.

Do you see the nodes (devices) in the velux-nodes node?

No, before I had 12 nodes, now I deleted 6 to try.

Did you save scene in the KLF-200 ans did you see them in the KLF-200? Scenes can also be stored in a KLR 200. These must first be imported into the KLF200.

No, I don't use scenes.

I use Chrome.

This http://192.168.1.101:1880/velux/nodes return: []

Thank's Gianni

PLCHome commented 5 years ago

You say

No, I don't use scenes. Can't get scene list

I'm confused ??

This http://192.168.1.101:1880/velux/nodes return: []

Is the KLF-200 connected? Does the KLF-200 have the firmware 0.2.0.0.71? Please check this

[{"id":"857c19c0.fdb9c","type":"Velux Api","z":"7a7b8638.9b31d8","name":"","datasource":"","api":"8","ntf":null,"topic":"","x":960,"y":420,"wires":[["d7ddfc5a.91d988"]]},{"id":"d7ddfc5a.91d988","type":"debug","z":"7a7b8638.9b31d8","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","x":1130,"y":420,"wires":[]},{"id":"eb8d7893.98eb68","type":"inject","z":"7a7b8638.9b31d8","name":"","topic":"","payload":"","payloadType":"date","repeat":"10","crontab":"","once":true,"onceDelay":0.1,"x":770,"y":420,"wires":[["857c19c0.fdb9c"]]}]

Somtime an factory reste will help.

giannicattoni commented 5 years ago

I do a factory reset. If there a no scenes the error "Can't get scene list" appears. So I created a scene that I don't use. I can access the nodes only by ID, not the name, but it is not a problem. Now I can command and see the state.

PLCHome commented 5 years ago

I can access the nodes only by ID, not the name, but it is not a problem.

so readme.md:

node index: This is the index of the device (node) within the KLF200. In the dropdown, the index and the name are displayed when the combo box is empty.