Closed Kittencore0914 closed 2 years ago
You can use Infinity bootloader to triple boot ME, PRO and ARK. There is one download for it in the releases section of this project.
Latest release of ARK contains the Infinity installer. https://github.com/PSP-Archive/ARK-4/releases/download/r91/ARK.zip
您可以使用Infinity引导加载程序将ME,PRO和ARK三重引导。在此项目的"发布"部分中有一个下载。
first i install art-4 on ofw according to your tutorial,then i install proc in proc (on art-4)and select “proc" model in the Infinity.but i found art-4 disappeared in the end. Which step i did wrong? Can you teach me the right steps? I really like art-4.I'm sorry for my bad English.
Are you using the infinity version in the ark download? It's the only infinity version with support for ARK, other links are usually outdated.
您是否在方舟下载中使用了无限版本?它是唯一支持ARK的无限版本,其他链接通常已经过时。
yes,use yours in ”ark“zip the first time. "2.05"
Try first installing pro and then installing ark. Then use infinity to change cfw.
Try first installing pro and then installing ark. Then use infinity to change cfw.
On PSP:
or On PSP:
your tutorial means "replace"s
Maybe need to modify the tutorial?
Ok the readme seems to be outdated. You no longer need to use the ARK PRO Updater since Infinity is superior. The steps are simpler:
You can ignore the ARK PRO Updater since that one is used to replace PRO with ARK, which allows ARK to run as an update to PRO rather than a standalone CFW.
Ok the readme seems to be outdated. You no longer need to use the ARK PRO Updater since Infinity is superior. The steps are simpler:
- Install pro like you normally do.
- Install ARK by running the Live loader (NOT the ARK PRO Updater).
- Install the Infinity version from the ARK download.
You can ignore the ARK PRO Updater since that one is used to replace PRO with ARK, which allows ARK to run as an update to PRO rather than a standalone CFW.
Queston1: need”Copy the folder ARK_01234 into /PSP/SAVEDATA/“? Q2: new tutorial like this
And "K.BIN" need move(copy or cut) any more?
Yeah that seems about right, yes you need to copy the ARK_01234 into savedata folder. As for K.BIN it can be in either the savedata folder or the Live Loader folder.
是的,这似乎是正确的,是的,您需要将ARK_01234复制到saveata文件夹中。至于K.BIN它可以位于saveata文件夹或Live Loader文件夹中。
your mean "K.BIN file from ARK_Live folder" "ARK_01234 folder" must be same? the“K.bin" Need to be ”k.bin" in ARK_Live in the zip or "K.bin" in ARK_01234 folder in the zip? i see two "k.bin"s sha256 is diffent
No they don't need to be the same, the Live Loader uses its own K.BIN (its already included in its own folder). The K.BIN in the savedata folder is a dummy, you can replace it if you want but that is only useful for old legacy exploits on PS Vita. Generally you don't want to replace or move files on PSP, just copy ARK_01234 to savedata folder and Live Loader to game folder, only on Vita you need to change a few stuff and depending on the setup.
No they don't need to be the same, the Live Loader uses its own K.BIN (its already included in its own folder). The K.BIN in the savedata folder is a dummy, you can replace it if you want but that is only useful for old legacy exploits on PS Vita. Generally you don't want to replace or move files on PSP, just copy ARK_01234 to savedata folder and Live Loader to game folder, only on Vita you need to change a few stuff and depending on the setup.
No they don't need to be the same, the Live Loader uses its own K.BIN (its already included in its own folder). The K.BIN in the savedata folder is a dummy, you can replace it if you want but that is only useful for old legacy exploits on PS Vita. Generally you don't want to replace or move files on PSP, just copy ARK_01234 to savedata folder and Live Loader to game folder, only on Vita you need to change a few stuff and depending on the setup.
according to new tutorial 。ark-4 disappeared。
In which step does it cause trouble? When you say ARK disappears you mean that you try to run it with Infinity and it doesn't work?
it doesn't work。 and in ark mode and run “Infinity from ARK” ,psp will be “Blue Screen”
- Install pro like you normally do.
- Copy "ARK Live" to /PSP/GAME.
- Copy the folder ARK_01234 into /PSP/SAVEDATA/
- Install ARK by running the Live loader (NOT the ARK PRO Updater)
- It will install FLASH0.ARK into flash0 and launch the CFW.
- Install the Infinity version from the "ARK"zip.
then i Install ark-4 in 6.60Infinity ofw(NO art-4 NOproc) into art-4 is ok,run Infinity,Blue Screen.
do you have email? i can send the pic of blue screen.
Oh yeah, Infinity doesn't seem to run when launcher from ARK (I don't know if happens with other CFW?), you should run it from OFW (hold home button when booting the psp) and launch it from there.
hahahah... i hold home botton when booting,then into the proc... wth then i run Infinity to change to ark-4, then reboot... into proc again
so funny..OTL
When you hold home button it boots into PRO instead of OFW? And when you tell it to boot into ARK it boots into PRO? This seems like a really strange issue. When you run the Live Loader, does it install flash0 files and boots ARK correctly?
Did you actually install the Infinity update? You don't just have to install it on update folder, you also have to flash the update within the Infinity app, otherwise it won't be fully installed.
yeah i install Infinity,and run it.
One you run infinity you have to press R button to flash the update.
flash
i use Chronoswitch tp keep my psp with clean 6.60.then install your Infinity. it is not update. it is all clean.
One you run infinity you have to press R button to flash the update.
you mean i must install "O“ Infinity 2.0.3,then update 2.0.5 with your Infinity?
Which psp model? Did you install ark and pro before infinity?
Try this:
psp3000 09G
I'm charging,hahh debugging in the web with Developer
Maybe we can talk better on discord.
Maybe we can talk better on discord.
OK,can you give me a address?
I'm in the psp discord community.
Using a psp-2001 the ark infinity installer doesn't boot from OFW, ark needs to be installed and running first, the installer won't work if you don't hold R on the first boot though, the system will shut down if you don't hold R when attempting to launch the ark infinity installer even with ark running. The infinity installer will work as intended after all installation is finished. I'm not sure if needing to hold R is an intended function however it is not existent in the 2.0.3 version of the infinity installer nor is it included in the readme.md for this project or on the gbatemp post it wasn't until I saw the comments here that I knew I needed to hold R while starting the Ark Infinity Installer.
This was done on a system with a previous infinity setup with pro and ME installed and a CIPL flash.
Just one further question here. Pro as a permant CFW uses cIPL - the custom boot loader to boot the actual modified FW. Infinity's entry point is exploit based after IPL loading - if i get anything right. Should we be able to install infinity (2.05) on top of a cIPL modified system? This should give us the option to boot to CFW (permanent) on cold boot by pressing home?
Just one further question here. Pro as a permant CFW uses cIPL - the custom boot loader to boot the actual modified FW. Infinity's entry point is exploit based after IPL loading - if i get anything right. Should we be able to install infinity (2.05) on top of a cIPL modified system? This should give us the option to boot to CFW (permanent) on cold boot by pressing home?
There's no need for PRO on a system with ARK installed. Using Infinity with ARK gives the same CFW-On-Boot effect using a cIPL with PRO installed does. Follow the steps above that I posted and you'll be all set to go.
I was actually asking If that is possible. Iam asking because i could cold Boot Pro on demand then - even the Recovery would be present. Best of both worlds.
I might have fixed the issues with Adrenaline in the latest builds. Have anyone tried it?
How can i uninstall ARK4 CFW completely? i want to revert back from ARK4 to LME2.3. In my opinion, LME2.3 is better than ARK4 because for ARK4, i have minimalistic features in ARK4 that i can't use.
How can i uninstall ARK4 CFW completely? i want to revert back from ARK4 to LME2.3. In my opinion, LME2.3 is better than ARK4 because for ARK4, i have minimalistic features in ARK4 that i can't use.
Just run the ME installer. What are the "minimalistic" features that ARK doesn't have? As far as I'm concerned, there's nothing you can do with ME that you can't do with ARK, but there are many things you can do in ARK that you can't do with ME.
Oh, but wait. So does this mean i can install LME 2.3 while ARK4 cfw is installed. Can LME installer overwrite ARK4 CFW?
Oh, but wait. So does this mean i can install LME 2.3 while ARK4 cfw is installed. Can LME installer overwrite ARK4 CFW?
They can both co-exist at the same time and you can switch back and forth (check ARK's readme section on how to install as a Live CFW). In any case, can you tell me which features you are missing from ME? I'd like to implement them.
Just ARK and LME CFW?, i will test if the PSP still runs without the memory stick.
edit: It turns out, in the System info, it still says ARK4 infinity 2.
Anyway, can 6 files in the installer mean installing LME 6.61 CFW overwrite ARK4?
Just ARK and LME CFW?, i will test if the PSP still runs without the memory stick.
edit: It turns out, in the System info, it still says ARK4 infinity 2.
You have to run the ME installer from OFW (hold Home button on boot).
Anyway, can 6 files in the installer mean installing LME 6.61 CFW overwrite ARK4?
no files are overwritten, they don't have the same names so they can both be installed.
Oh, so there are 6 ARK4-specific modules. So, may i install LME? Hopefully i can save time purchasing another PSP for UMD videos.
Oh, so there are 6 ARK4-specific modules. So, may i install LME?
Sure. So are you gonna tell me what feature from ME is missing? Or was that just a made-up excuse? I mean I don't care if you use ME or not, I love ME myself, ARK has lots of ME stuff in it and the developer of ME was also one of the developers of ARK. But you said there's a feature in ME that you can't do in ARK and this is very important for me, can you please tell me what this feature is?
Hopefully i can save time purchasing another PSP for UMD videos.
How is ME better than ARK for playing UMD videos? You can't change UMD drive region to play region locked UMDs in ME.
OH! So ARK4 is better than LME for playing region-locked UMD videos on a Japanese PSP. It's not better than LME for M33 driver.
Why do you need M33 driver?
OH! So ARK4 is better than LME for playing region-locked UMD videos on a Japanese PSP. It's not better than LME for M33 driver.
So far ARK is the only CFW that can change UMD region to allow region locked UMD playback on any PSP model, mainly because this feature is rather new and hasn't been done before, so no ME is not better for UMD playback, it's actually worse!
How is the M33 Driver in ME better than Inferno 2? It's slower, supports less formats, has more bugs and consumes more RAM. Inferno 2 is much better in any meassure.
between lme and pro,like“ProSwitcherLme” pro and art-4?