search

PX4 / PX4-Autopilot

PX4 Autopilot Software
https://px4.io
BSD 3-Clause "New" or "Revised" License
8.22k stars 13.39k forks source link

mRo H7 OEM New, telemetry doesn’t work #19480

Open tomcats60 opened 2 years ago

tomcats60 commented 2 years ago

I'm using the latest PX4 version on the mRo H7 OEM NEW with the reference design carrier board (https://store.mrobotics.io/product-p/m10066a.htm). QGC detects the FC by USB but not through telemetry even if both telemetry module are linked (fixed yellow LED)

I tried on TELEM1 (UART2 = /dev/ttyS0) and TELEM2 (UART3 = /dev/ttyS1) but result is the same.

taileron commented 2 years ago

with the Stick Adapter https://store.mrobotics.io/product-p/m10062a.htm both telemetry ports (close to USB) work perfect with ESP 8266 By the way, both UAVCAN ports work now, before only port 1 worked

ryanjAA commented 2 years ago

Depending on when you received the board there was a batch with some hardware issues iirc.

See here (https://px4.slack.com/archives/C0W2KUFFT/p1648319405997709?thread_ts=1648302068.722429&channel=C0W2KUFFT&message_ts=1648319405.997709)