firmware version: 1.14 and later;
airframe: fixwing and quadrotor
details:pwm main output nothing, There is no square wave display on the oscilloscope,so I can not calibrate the ESC. But I tried other firmware version which works well with version 1.13 and earlier. And I tried the Holybro px4 fmu v5, It either works well with version 1.14, it confused me..
To Reproduce
Drone switched on '...'
Uploaded mission '....' (attach QGC mission file)
Took off '....'
See error
Expected behavior
The electrical calibration was completed by oneself, but the battery was not connected
Screenshot / Media
No response
Flight Log
no
Software Version
firmware 1.14
Flight controller
cuav nano v5
Vehicle type
None
How are the different components wired up (including port information)
Describe the bug
firmware version: 1.14 and later; airframe: fixwing and quadrotor details:pwm main output nothing, There is no square wave display on the oscilloscope,so I can not calibrate the ESC. But I tried other firmware version which works well with version 1.13 and earlier. And I tried the Holybro px4 fmu v5, It either works well with version 1.14, it confused me..
To Reproduce
Drone switched on '...' Uploaded mission '....' (attach QGC mission file) Took off '....' See error
Expected behavior
The electrical calibration was completed by oneself, but the battery was not connected
Screenshot / Media
No response
Flight Log
no
Software Version
firmware 1.14
Flight controller
cuav nano v5
Vehicle type
None
How are the different components wired up (including port information)
No response
Additional context
No response