Interface with Arduino Uno and W5100 from ESP32 telnet source code

[proasnet]

Hi yozik04 Now I trying telnet interface with Arduino Uno and W5100 shield for EVOHD connection. Have you yourself working no wirelles project for direct ethernet connection, which I can not edit current settings in HA PAI? Now, I am using ESP connection, I thing that Arduino Ethernet may by very similar, but If I edit code for ESP, go out all wifi functions as next code:

#include <SPI.h>
#include <Ethernet.h>
#define MAX_SRV_CLIENTS 1
byte mac[] = { 0xF0, 0x08, 0xD1, 0xC5, 0xC7, 0x2C };
#define MAX_SRV_CLIENTS 1
EthernetServer server(23);
EthernetClient serverClients[MAX_SRV_CLIENTS];

void setup() {
  Serial.begin(57600);
  Ethernet.begin(mac);
  server.begin();
}

void loop() {
  uint8_t i;
  //  EthernetClient client = server.available();

  //check clients for data - funguje dobře
  for (i = 0; i < MAX_SRV_CLIENTS; i++) {
    //find free/disconnected spot
    if (!serverClients[i] || !serverClients[i].connected()) {
      if (serverClients[i]) serverClients[i].stop();
      serverClients[i] = server.available();
      break;
    }
  }
  for (i = 0; i < MAX_SRV_CLIENTS; i++) {
    if (serverClients[i] && serverClients[i].connected()) {
      if (serverClients[i].available()) {
        //get data from the telnet client and push it to the UART
        while (serverClients[i].available()) Serial.write(serverClients[i].read());
      }
    }
    else {
      if (serverClients[i]) {
        serverClients[i].stop();
      }
    }
  }

  //check UART for data
  if (Serial.available()) {
    size_t len = Serial.available();
    uint8_t sbuf[len];
    Serial.readBytes(sbuf, len);
    //push UART data to all connected telnet clients
    for (i = 0; i < MAX_SRV_CLIENTS; i++) {
      if (serverClients[i] && serverClients[i].connected()) {
        serverClients[i].write(sbuf, len);
        delay(1);
      }
    }
  } else {
    for (i = 0; i < MAX_SRV_CLIENTS; i++) {
      if (serverClients[i]) serverClients[i].stop();
    }
    delay(1000);
  }
}

Then no working. Data goes only one direct... Very Thanks

[yozik04]

Hi,

1. https://www.markdownguide.org/extended-syntax#fenced-code-blocks
2. What you are asking?

[proasnet]

I am sorry for bad include code. My ask is, thay you have your own tested sketch for Arduino Uno with ethernet shield as replacement for ESP32. I have working ESP32 interface, but only for this I have one wifi AP. The better will be wired connection. I trying edit working ESP32 sketch for use with UNO. not working yet. So that I don't invent what may already exist. I tried other telnet servers for arduino, but none of them worked with PAI, probably some is special.

[yozik04]

Hmm, I do not remember if anybody tried to use it with Arduino. Are you sure baud rate matches setting in panel? It should not be any special.

[proasnet]

Yes. I have 57600 Bauds, in panel and in the code. I found some another request here https://gitter.im/paradox-alarm-interface/community?at=5e5d1071376d882250c7be84 but your answer was link to ESP32 interface. Thank you.

montyx99 @montyx99 mar 02 2020 14:20 hello guys I'd like to ask 2 questions:

1. my uncle can replace my EVO192 to any Spectra panel. I have a flat, with 10 sensors and 1 sirene. Is the spectra devices more reliable with the PAI? If yes, which spectra panel that you recommend to choose?
2. is there any working solution for TTL to Ethernet devices? Such an arduino with a w5100 shield, or a ttl2lan modul? I'd like to avoid the usage of Wifi in case of communication. My flat is brand new, and I've requested a CAT6 cable to build in between my alarm box and my giganet switch.

_ Jevgeni Kiski @yozik04 mar 02 2020 14:56

I Use EVO and it is way better than any SP/MG
https://github.com/ParadoxAlarmInterface/pai/wiki/Connection-methods#serial-over-ip-esp32

[dmylnka]

I had made this setup for two Paradox Alarm models (SP4000/5500 and EVO48). I use an arduino mega 2560 with Ethernet Shield. Then arduino serial port is directly connected to Alarm panels.

I can post implementation for anyone who needs/wants to interconnect Paradox Alarm with PAI over Ethernet wire.

[yozik04]

@dmylnka It is great! Please share! I had many requests for that.

PS: you can edit wiki and put you knowledge directly there.

Thank you!

[dmylnka]

@yozik04 i will collect all files (arduino code , STL 3D Print etc) and post to wiki. i am going to add some instructions as supports different serial baudrate (configurable throught Telnet CLI).

[dmylnka]

@yozik04 , after trying to find some time to gather all staff you can find all required files and a sort description to the following repository. https://github.com/dmylnka/Paradox-Ethernet-USB-Interface

I am going to write a more detailed description and instructions how to use.

Regards, Dimitris.

[yozik04]

@dmylnka Really cool. Great work. Thank you for sharing!

[dmylnka]

wiki updated with ethernet usb interface to Paradox Control Panels. https://github.com/ParadoxAlarmInterface/pai/wiki/Connection-methods

[yozik04]

Wow. Great write up. Thank you!

[mmaccaroni]

I had made this setup for two Paradox Alarm models (SP4000/5500 and EVO48). I use an arduino mega 2560 with Ethernet Shield. Then arduino serial port is directly connected to Alarm panels.

I can post implementation for anyone who needs/wants to interconnect Paradox Alarm with PAI over Ethernet wire.

So it is confirmed that this interface works with EVO48§? I am planning to build it to connect to my EVO48

[dmylnka]

So it is confirmed that this interface works with EVO48§? I am planning to build it to connect to my EVO48

Yes i confirm that tested with EVO48 running on latest FW. I suppose that could operate in earlier Paradox EVO48 FW.

[mmaccaroni]

So it is confirmed that this interface works with EVO48§? I am planning to build it to connect to my EVO48

Yes i confirm that tested with EVO48 running on latest FW. I suppose that could operate in earlier Paradox EVO48 FW.

Thanks a lot! will try to build it

[mmaccaroni]

So it is confirmed that this interface works with EVO48§? I am planning to build it to connect to my EVO48

Yes i confirm that tested with EVO48 running on latest FW. I suppose that could operate in earlier Paradox EVO48 FW.

It works like charm! Thanks for sharing this awesone project!

[dmylnka]

happy that helped you!!!