Paramat770 / reaver-wps

Automatically exported from code.google.com/p/reaver-wps
0 stars 0 forks source link

wash #260

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago

0. What version of Reaver are you using?  (Only defects against the latest
version will be considered.)
1.4

1. What operating system are you using (Linux is the only supported OS)?
backtrack 5r2

2. Is your wireless card in monitor mode (yes/no)?
yes

3. What is the signal strength of the Access Point you are trying to crack?
65%

4. What is the manufacturer and model # of the device you are trying to
crack?
thomson 789vn

5. What is the entire command line string you are supplying to reaver?
reaver -i mon0 -b B4:82:FE:FA:D9:55 -vv 
also i tried options -L -T2 -E

stuck at 90.90 % same pin

6. Please describe what you think the issue is.
probalbly wps is turned of? wash says > WPS Locked > yes , so it should be 
possible ?  / or thomson router gets locked or my pci card Atheros AR2425   ath5k 
is not good ? 

7. Paste the output from Reaver below.

BSSID                  Channel       RSSI       WPS Version       WPS Locked    
    ESSID
--------------------------------------------------------------------------------
-------------------------------
B4:82:FE:FA:D9:55       8            -69        1.0               Yes           
    ThomsonFAD955

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[?] Restore previous session for B4:82:FE:FA:D9:55? [n/Y] y
[+] Restored previous session
[+] Waiting for beacon from B4:82:FE:FA:D9:55
[+] Switching mon0 to channel 8
[+] Associated with B4:82:FE:FA:D9:56 (ESSID: ThomsonFAD955)
[+] Trying pin 01325676
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 01335675
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 01345674
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 01355673
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 01365672
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received WSC NACK
[+] Sending WSC NACK
[!] WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking

Original issue reported on code.google.com by heeeen...@gmail.com on 3 Mar 2012 at 9:52

GoogleCodeExporter commented 8 years ago
I have the same problem! I think the new firmware locks the WPS for many 
hours...

Original comment by zppi...@gmail.com on 10 Feb 2013 at 4:59