Paramat770 / reaver-wps

Automatically exported from code.google.com/p/reaver-wps
0 stars 0 forks source link

WARNING: Receive timeout occurred #339

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
Answer the following questions for every issue submitted:

0. What version of Reaver are you using?  Reaver v1.4

1. What operating system are you using? Ubuntu 12.04

2. Is your wireless card in monitor mode (yes/no)? yes, airmon-ng start wlan0, 
and I'm using mon0 for reaver

3. What is the signal strength of the Access Point you are trying to crack? -19

4. What is the manufacturer and model # of the device you are trying to crack? 
Telus communications, Actiontec V1000H, Firmware Version: 31.30L.55

5. What is the entire command line string you are supplying to reaver?
reaver -i mon0 -b "my router's mac" -c 1 -A -vv

6. Please describe what you think the issue is. I have absolutely no idea, 
feels like I've looked everywhere and tried everything at this point

7. Paste the output from Reaver below.

root@halo:~# reaver -i mon0 -b A8:39:44:XX:XX:XX -c 1 -A -vv

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[+] Switching mon0 to channel 1
[+] Waiting for beacon from A8:39:44:XX:XX:XX
[+] Associated with A8:39:44:XX:XX:XX (ESSID: H****2)
[+] Trying pin 55555678
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request

So I've been all through the forums, google and youtube, tried many variations 
in command line and this is the furthest I got.
This is my home router and it's only about 6FT away from my computer. 

Also note that other users on here say that they have success with the same 
network card as me: broadcom BCM4312 running b43-fwcutter version# 5.100.138

It is worth noting that if I do not use the -A command then all I get is a 
bunch of FAILED TO ASSOCIATE messages:

root@halo:~# reaver -i mon0 -b A8:39:44:XX:XX:XX -c 1 -vv

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[+] Switching mon0 to channel 1
[?] Restore previous session for A8:39:44:XX:XX:XX? [n/Y] y
[+] Restored previous session
[+] Waiting for beacon from A8:39:44:XX:XX:XX
[!] WARNING: Failed to associate with A8:39:44:XX:XX:XX (ESSID: H****2)
[!] WARNING: Failed to associate with A8:39:44:XX:XX:XX (ESSID: H****2)
[!] WARNING: Failed to associate with A8:39:44:XX:XX:XX (ESSID: HomeT2)
[!] WARNING: Failed to associate with A8:39:44:XX:XX:XX (ESSID: H****2)

===================================================================

I ran wash any everything looks ok:

root@halo:~# wash -i mon0

Wash v1.4 WiFi Protected Setup Scan Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

BSSID                  Channel       RSSI       WPS Version       WPS Locked    
    ESSID
--------------------------------------------------------------------------------
-------------------------------
A8:39:44:XX:X:XX       1            -19        1.0               No             
   H****2

==================================================================

pcap file is available for these attempts.

Please help me

Original issue reported on code.google.com by aldoba...@gmail.com on 21 Jun 2012 at 5:26

GoogleCodeExporter commented 8 years ago
try using optinos "-d 5 -N -S" with reaver.
Use aireply-ng to associate first.
aireply -1 0 -a BSSID mon0

Original comment by BHT...@gmail.com on 24 Jun 2012 at 10:07

GoogleCodeExporter commented 8 years ago
BHT, Thank you very much for our reply, unfortunately I don't think I've made 
it any further. I did as you suggested and used aireplay-ng to associate 
first(which was successful!), then I used reaver with the options you suggested 
but still wasn't able to get reaver to associate at first but then I added -A 
into the command line and made some progress, now my problem is that I'm 
receiving timeout errors on the sending identity response, see below:

root@halo:~# reaver -d 5 -N -S -i mon0 -b A8:39:44:55:77:20 -c 1 -vv -A

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[+] Switching mon0 to channel 1
[?] Restore previous session for A8:39:44:XX:XX:XX? [n/Y] y
[+] Restored previous session
[+] Waiting for beacon from A8:39:44:XX:XX:XX
[+] Associated with A8:39:44:XX:XX:XX (ESSID: HomeT2)
[+] Trying pin 55555678
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M1 message
[+] Received M1 message
[+] Received M1 message
[+] Received M1 message
[+] Received M1 message
[+] Received M1 message
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 55555678
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x02), re-trying last pin
[+] Trying pin 55555678

Original comment by aldoba...@gmail.com on 25 Jun 2012 at 1:45

GoogleCodeExporter commented 8 years ago
having same problem..........

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[+] Switching mon0 to channel 1
[?] Restore previous session for E8:39:DF:xx:xx:xx? [n/Y] y
[+] Restored previous session
[+] Waiting for beacon from E8:39:DF:xx:xx:xx
[+] Associated with E8:39:DF:xx:xx:xx (ESSID: ...................)
[+] Trying pin 00009973
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request

Any one knows solution ?

many thanks

Original comment by arek.piw...@googlemail.com on 5 Jul 2012 at 11:17

GoogleCodeExporter commented 8 years ago
try --no-nacks

Original comment by metaltu...@gmail.com on 11 Sep 2012 at 2:42

GoogleCodeExporter commented 8 years ago
Did anyone ever find a solution to this problem??

Original comment by THEhtiz...@gmail.com on 22 Apr 2013 at 8:02

GoogleCodeExporter commented 8 years ago
yes. all i had to do was change my interface

Original comment by metaltu...@gmail.com on 22 Apr 2013 at 10:27

GoogleCodeExporter commented 8 years ago
hi i have the same problem as the rest? Have you found a solution?

Original comment by mariyo8...@gmail.com on 30 Apr 2013 at 9:49

GoogleCodeExporter commented 8 years ago
Hi All, i got same problem above, any idea to resolve?

Original comment by ekoa7...@gmail.com on 1 May 2013 at 2:27

GoogleCodeExporter commented 8 years ago
You said changing interface worked. What interface did you have first, and what 
interface did you change to?

Thanks in advance.

Original comment by kvels...@gmail.com on 2 May 2013 at 9:12

GoogleCodeExporter commented 8 years ago
I ran airmon-ng start wlan0 which changed the monitor interface to mon1.
running airmon to change monitor interface number up one every time it's
done. for example running airmon-ng start wlan0 again would switch it to
mon2. just do that and the new interface should respond well to the router

Original comment by metaltu...@gmail.com on 2 May 2013 at 10:14

GoogleCodeExporter commented 8 years ago
@ comment #10
Perfect solution, care to explain why this works?  I like learning new things  
:) 

Original comment by ericlewi...@gmail.com on 3 Aug 2013 at 7:54

GoogleCodeExporter commented 8 years ago
not sure why it works...however my guess is that each mon interface has it's 
own mac address..it's possible that if someone attacked a router with the same 
mon interface at an earlier time the router may have taken security measures 
against it...by changing to a mon interface I was able to attack the router 
seamlessly...this is just a theory though

Original comment by metaltu...@gmail.com on 3 Aug 2013 at 10:39

GoogleCodeExporter commented 8 years ago
Why am I getting errors
__________________________________-blck_5r3

+] Associated with 40:4A:03: (ESSID: p)
[+] Trying pin 12345670
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request

Original comment by YILDIRIM...@hotmail.com on 3 Sep 2013 at 2:28

GoogleCodeExporter commented 8 years ago
if that fails then try using mac changer to spoof your mac to an already 
associated client. What is likely the case is the owner has mac filtering 
enabled. By spoofing a mac that is allowed access you can preform the attack as 
usual. Additionaly, getting closer to the AP will boost chances substantially. 
I would also recommend running reaver with a -r (reoccurring delay) for modern 
routers that will lock wps after a certain number of pin attempts...This will 
take longer but it works at least 

Original comment by metaltu...@gmail.com on 3 Sep 2013 at 3:38

GoogleCodeExporter commented 8 years ago
tried to use both methods but still the same output. Here is what i do: start 
changing mac to wlan0 with an already connected station. then associate with my 
router with aireplay mon0 -1 120 -a (mac). 

then reaver -A -i mon0 -b (mac)  -vv
still the same output 

Original comment by juanrra...@gmail.com on 27 Sep 2013 at 10:24

GoogleCodeExporter commented 8 years ago
Associated with xx:xx:xx:xx:xx:xx (ESSID: ...................)

Mine doesn't get further than this. It just do nothing (already have -vv)

Original comment by tactical...@live.nl on 15 Dec 2013 at 10:53

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
Try to use airmon-zc instead of airmon-ng. Worked for me. I use iwlwifi. 

Original comment by crash...@gmail.com on 3 Feb 2014 at 5:21

GoogleCodeExporter commented 8 years ago
Greetings!

I had the same issue you all experience. In one of the posts it was mentioned 
to start monitoring mode again on wlan0 in order to create a new session mon1 
(old one is mon0). It worked half way for me.

By simply restarting my PC (dual boot) I received a better result than starting 
a session on a new virtual/monitor interface (mon1).

Running reaver right this second, and from 60 seconds/pin I am getting 17 
seconds/pin on average. Distance is about -64dBm.

Hope this helps. I have been running reaver non-stop for about 48 hours now, so 
something got hanged I guess.

PS

command I am using is:::: reaver -i mon0 -b MACaDDRESS -S -N -a -c 6 -vv

((((((((-c 6 is the channel)))))))))))

Regards

Original comment by omforyou...@gmail.com on 7 Apr 2014 at 8:27

GoogleCodeExporter commented 8 years ago
Hi guy's. I have been receiving the same problem, although not only am I rather 
new to this, I am also using reaver on my phone (RfA 1.20)

It's a Samsung Galaxy S2 using bcmon for Monitor Mode...

I'm getting the same outcome as 'arek.piw...@googlemail.com'

[+] Trying pin 00009973
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred

I really don't know what was causing this and would like to know how to fix 
this issue as it was not an issue earlier this morning.. + I am a complete 
novice and only have a simple GUI to work with (A menu of settings such as 
"Ignore AP Locks [], and Send No NACKs [] etc....

Please help.. I would really appreciate it, Thanks.. :-) 

Original comment by Aaron.To...@gmail.com on 14 Sep 2014 at 6:22

GoogleCodeExporter commented 8 years ago
How change interface?

Original comment by MegaVlad...@gmail.com on 27 Sep 2014 at 11:07

GoogleCodeExporter commented 8 years ago
Guyz...need sum help....should i ignore

Warning: recieve timeout occured

....plz give a solution if it affects sumthing.....

Original comment by www.a...@gmail.com on 8 Apr 2015 at 5:01

GoogleCodeExporter commented 8 years ago
hi going to need some hlep on this too please...
my command:
terminal 1:
airodump-ng wlan0mon -d 5C:35:3B:A3:21:EE -c 11 --ignore-negative-one

terminal 2:
reaver -i wlan0mon -b 5C:35:3B:A3:21:EE -a -S -N -c 11 -vv -w -T 0.5 - -x 360 
-vv -L

Original comment by florr...@gmail.com on 1 Jun 2015 at 12:36