search

PaxInstruments / t400-electronics

Electronics for the Pax Instruments T400 temperature datalogger
20 stars 9 forks source link

MicroSD card footprint #145

Closed charlespax closed 9 years ago

charlespax commented 9 years ago

The MicroSD card connector does not match the component we have been prototyping with. We should make a new footprint that matches the component we will use in production.

The footprint should also indicate the centerline of the MicroSD card slot on the Measures layer.

charlespax commented 9 years ago

See also https://github.com/PaxInstruments/t400-electronics/issues/79. Make sure the card positions are correct.

samchoy88 commented 9 years ago

According to the T-flash connect spec. I found Seedstuido library has slightly different on the pad. image

Below picture is the T-flash connector in Seedstuido library. image

The pin 4 should align to the line in below picture. And I updated component in Pax instrument library. image

charlespax commented 9 years ago

This change made it into the most recent board order, right? If so, we can close this and open another issue if it is still a problem. Closing.