Closed charlespax closed 9 years ago
When debugging a prototype I needed to hold down the power button to program the bootloader. I jumpted a wire from the PWR_ONOFF test point to the USB input. Add a solder jumper next to the test point. This will allow the device to be always on.
Here is the jumper added to the schematic.
The jumper should be on the back side.
Looks done.
When debugging a prototype I needed to hold down the power button to program the bootloader. I jumpted a wire from the PWR_ONOFF test point to the USB input. Add a solder jumper next to the test point. This will allow the device to be always on.