Closed charlespax closed 9 years ago
This depends on https://github.com/PaxInstruments/t400-electronics/issues/37
@samchoy88 make sure all the test points are on the back of the board. This way the programming rig can interface with all the points while the LCD is installed.
It is okay to have a duplicate test point on the top side, but we must have one of each test point on the bottom side. Also, try to keep them on the 0.1" grid where possible.
Here are some example test points on the top side.
I think we're done with the 0.9 test points. Let's revisit this in 0.10 after https://github.com/PaxInstruments/t400-electronics/issues/37 is done.
See https://github.com/PaxInstruments/t400-production, https://github.com/PaxInstruments/t400-electronics/issues/54, https://github.com/PaxInstruments/t400-electronics/issues/37