XCSoar: No data (UDP ports: 4353, 10110, 4352, 2000, 23)

[dgofman]

1. Stratux version: v1.4r5 (fe12ed3bd1)

2. Stratux config: GDL90 MSL

   SDR

   • [ ] single
   • [ X] dual

   GPS

   • [X ] yes
   • [ ] no type:

   AHRS

   • [X ] yes
   • [ ] no

   power source:

   usb cable: yes

3. EFB app and version: (e.g., WingX Pro7 8.6.2)

   EFB platform: (e.g., iOS 9.2)

   EFB hardware: (e.g., iPad Mini 2)

4. Description of your issue:

I download and install the latest version of Stratux-FLARM https://github.com/PepperJo/stratux/releases/tag/v1.5b2-flarm and XCSoar 6.8. In Menu->Settings the "GDL90 MSL" is enabled". Now in XCSoar, I tried to add a connection to the device "Config->Devices->Edit->UDP Port (TCP Port 10110) Device: FLARM. The result: No Data. I tried other ports the results are the same. Please, can you help me.

[VirusPilot]

Are you sure that XCSoar supports GDL90? I would usually expect glider apps to only support the FLARM-NMEA protocol.

[dgofman]

Looks like it was before. https://github.com/cyoung/stratux/issues/489

[dgofman]

I would like to get actual ADS-B traffic on XCSoar. Currently, I have to use two application XCSoar and Stratux Web Application or Avare.

[PepperJo]

I also remember XCSoar only supporting the FLARM NMEA protocol. At least from my side there are no plans to support it. Maybe you can ask the XCSoar developers if they are willing to support GDL90 since it seems to be the defacto standard now. Alternatively you can always try the old fork that you linked above.

[dgofman]

I tried an old version. Didn't work for me https://github.com/cyoung/stratux/files/826743/update-stratux-flarm-v1.2r1-1b17cb4101.sh.zip. Maybe a problem with Stratux 3? I can see one Note: The v3 radio does not support FLARM at the moment since it requires a new firmware on the radio.

https://github.com/PepperJo/stratux/releases/tag/v1.5b2-flarm

[PepperJo]

I doubt that is has anything to do with the new v3 radio except if you did buy your Stratux in the last month or so. Btw there is no Stratux 2 or 3, this is just the radio version. Anyway the version you linked supports the same radios as "my" FLARM fork does, namely up to v2. If you happen to have the new v3 radio you are out of luck in regards to FLARM, there is currently no code base that supports the new radio.

[dgofman]

I purchased August 9, 2018 from CrewDogElectronics https://www.etsy.com/shop/CrewDogElectronics?utm_source=transactional&utm_medium=email&utm_campaign=convo_notifications_010170_10683759063_0_0&campaign_label=convo_notifications&utm_content=&email_sent=1533833423&euid=COWOwEwm2QjdOUpXd70trb6mfuTP&eaid=253604199679&x_eaid=99cc42fea5&link_clicked=2. I don't know what version on my Stratux. Did you able to integrate with XCSoar using your Stratux?

On Mon, May 20, 2019 at 10:32 AM Jonas Pfefferle notifications@github.com wrote:

I doubt that is has anything to do with the new v3 radio except if you did buy your Stratux in the last month or so. Btw there is no Stratux 2 or 3, this is just the radio version. Anyway the version you linked supports the same radios as "my" FLARM fork does, namely up to v2. If you happen to have the new v3 radio you are out of luck in regards to FLARM, there is currently no code base that supports the new radio.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/PepperJo/stratux/issues/4?email_source=notifications&email_token=AABD6YQTFYW46AU272SVBJLPWLOCNA5CNFSM4HN3XARKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVZRGKQ#issuecomment-494080810, or mute the thread https://github.com/notifications/unsubscribe-auth/AABD6YSEVYR5RVSINQ6UDCLPWLOCNANCNFSM4HN3XARA .

[PepperJo]

Then you definitely do not have the v3 radio so this FLARM fork should work in general but not with XCSoar. I personally do not use XCSoar. Try posting a comment on the pull request you found with the old FLARM-NMEA code maybe someone there is using XCSoar. Alternatively try reaching out on stratux.slack.com.