p5pRT
commented
24 years ago From Paul.Moore@uk.origin-it.com
The build failed\, with a link error trying to build perl56.dll (unresolved external Perl_load_module_nocontext). Attached is a snapshot of the error\, plus my Makefile.
Paul Moore.
---- Error messages ----
C:\Data\Perl\perl-5.6.0-RC1\win32\dl_win32.xs => C:\Data\Perl\perl-5.6.0-RC1\ext\DynaLoader\dl_win32.xs 1 file copied if not exist ..\lib\auto mkdir ..\lib\auto cd ..\ext\DynaLoader ..\..\miniperl.exe -I..\..\lib DynaLoader_pm.PL ..\..\miniperl.exe -I..\..\lib XSLoader_pm.PL cd ..\..\win32 xcopy /f /r /i /d ..\ext\DynaLoader\DynaLoader.pm ..\lib\ C:\Data\Perl\perl-5.6.0-RC1\ext\DynaLoader\DynaLoader.pm -> C:\Data\Perl\perl-5.6.0-RC1\lib\DynaLoader.pm 1 File(s) copied xcopy /f /r /i /d ..\ext\DynaLoader\XSLoader.pm ..\lib\ C:\Data\Perl\perl-5.6.0-RC1\ext\DynaLoader\XSLoader.pm -> C:\Data\Perl\perl-5.6.0-RC1\lib\XSLoader.pm 1 File(s) copied cd ..\ext\DynaLoader ..\..\miniperl.exe -I..\..\lib ..\..\lib\ExtUtils\xsubpp -C++ -prototypes dl_win32.xs > DynaLoader.c cd ..\..\win32 cl -c -I..\ext\DynaLoader -nologo -Gf -W3 -I..\lib\CORE -I.\include -I. -I.. -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DPERLDLL -DPERL_CORE -O 1 -MD -DNDEBUG -DPERL_MSVCRT_READFIX -Fo..\ext\DynaLoader\DynaLoader.obj ..\ext \DynaLoader\DynaLoader.c DynaLoader.c link -dll -def:perldll.def -out:..\perl56.dll @C:\TEMP\nmb00282. perldll.def : error LNK2001: unresolved external symbol Perl_load_module_nocontext ..\perl56.lib : fatal error LNK1120: 1 unresolved externals LINK : fatal error LNK1141: failure during build of exports file NMAKE : fatal error U1077: 'link' : return code '0x475' Stop.
---- Makefile ----
# # Makefile to build perl on Windows NT using Microsoft NMAKE. # # This is set up to build a perl.exe that runs off a shared library # (perl.dll). Also makes individual DLLs for the XS extensions. #
## ## Make sure you read README.win32 *before* you mess with anything here! ##
## ## Build configuration. Edit the values below to suit your needs. ##
# # Set these to wherever you want "nmake install" to put your # newly built perl. # INST_DRV = C: INST_TOP = $(INST_DRV)\Applications\DevPerl
# # Comment this out if you DON'T want your perl installation to be versioned. # This means that the new installation will overwrite any files from the # old installation at the same INST_TOP location. Leaving it enabled is # the safest route\, as perl adds the extra version directory to all the # locations it installs files to. If you disable it\, an alternative # versioned installation can be obtained by setting INST_TOP above to a # path that includes an arbitrary version string. # #INST_VER = \5.6.0
# # Comment this out if you DON'T want your perl installation to have # architecture specific components. This means that architecture- # specific files will be installed along with the architecture-neutral # files. Leaving it enabled is safer and more flexible\, in case you # want to build multiple flavors of perl and install them together in # the same location. Commenting it out gives you a simpler # installation that is easier to understand for beginners. # INST_ARCH = \$(ARCHNAME)
# # uncomment to enable multiple interpreters. This is need for fork() # emulation. # #USE_MULTI = define
# # XXX WARNING! This option is still very experimental. May be broken. # # Beginnings of interpreter cloning/threads; still very incomplete. # This should be enabled to get the fork() emulation. This needs # USE_MULTI as well. # #USE_ITHREADS = define
# # uncomment to enable the implicit "host" layer for all system calls # made by perl. This needs USE_MULTI above. This is also needed to # get fork(). # #USE_IMP_SYS = define
# # WARNING! This option is deprecated and will eventually go away (enable # USE_ITHREADS instead). # # uncomment to enable threads-capabilities. This is incompatible with # USE_ITHREADS\, and is only here for people who may have come to rely # on the experimental Thread support that was in 5.005. # #USE_5005THREADS= define
# # WARNING! This option is deprecated and will eventually go away (enable # USE_MULTI instead). # # uncomment next line if you want to use the PERL_OBJECT build option. # DO NOT ENABLE unless you have legacy code that relies on the C++ # CPerlObj class that was available in 5.005. This cannot be enabled # if you ask for USE_5005THREADS above. # #USE_OBJECT = define
# # uncomment one of the following lines if you are using either # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98) # #CCTYPE = MSVC20 CCTYPE = MSVC60
# # uncomment next line if you want debug version of perl (big\,slow) # #CFG = Debug
# # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. # It has patches that fix known bugs in older versions of MSVCRT.DLL. # This currently requires VC 5.0 with Service Pack 3 or later. # Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ # and follow the directions in the package to install. # # Not recommended if you have VC 6.x and you're not running Windows 9x. # #USE_PERLCRT = define
# # uncomment to enable linking with setargv.obj under the Visual C # compiler. Setting this options enables perl to expand wildcards in # arguments\, but it may be harder to use alternate methods like # File::DosGlob that are more powerful. This option is supported only with # Visual C. # #USE_SETARGV = define
# # if you have the source for des_fcrypt()\, uncomment this and make sure the # file exists (see README.win32). File should be located in the same # directory as this file. # #CRYPT_SRC = fcrypt.c
# # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a # library\, uncomment this\, and make sure the library exists (see README.win32) # Specify the full pathname of the library. # CRYPT_LIB = C:\LOCAL\Lib\MD\libdes.lib
# # set this if you wish to use perl's malloc # WARNING: Turning this on/off WILL break binary compatibility with extensions # you may have compiled with/without it. Be prepared to recompile all # extensions if you change the default. Currently\, this cannot be enabled # if you ask for USE_IMP_SYS above. # #PERL_MALLOC = define
# # set the install locations of the compiler include/libraries # Running VCVARS32.BAT is *required* when using Visual C. # Some versions of Visual C don't define MSVCDIR in the environment\, # so you may have to set CCHOME explicitly (spaces in the path name should # not be quoted) # #CCHOME = f:\msvc20 CCHOME = C:\VisualStudio\VC98 CCINCDIR = $(CCHOME)\include CCLIBDIR = $(CCHOME)\lib
# # Additional compiler flags can be specified here. #
# # This should normally be disabled. Adding -DPERL_POLLUTE enables support # for old symbols by default\, at the expense of extreme pollution. You most # probably just want to build modules that won't compile with # perl Makefile.PL POLLUTE=1 # instead of enabling this. Please report such modules to the respective # authors. # #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
# # This should normally be disabled. Enabling it will disable the File::Glob # implementation of CORE::glob. # #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
# # This should normally be disabled. Enabling it causes perl to read scripts # in text mode (which is the 5.005 behavior) and will break ByteLoader. #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
# # This should normally be disabled. Enabling it runs a cloned toplevel # interpreter (*EXPERIMENTAL*\, fails tests) #BUILDOPT = $(BUILDOPT) -DTOP_CLONE
# # specify semicolon-separated list of extra directories that modules will # look for libraries (spaces in path names need not be quoted) # EXTRALIBDIRS =
# # set this to your email address (perl will guess a value from # from your loginname and your hostname\, which may not be right) # EMAIL = gustav@morpheus.demon.co.uk
## ## Build configuration ends. ##
##################### CHANGE THESE ONLY IF YOU MUST #####################
!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" D_CRYPT = undef !ELSE D_CRYPT = define CRYPT_FLAG = -DHAVE_DES_FCRYPT !ENDIF
!IF "$(USE_OBJECT)" == "define" PERL_MALLOC = undef USE_5005THREADS = undef USE_MULTI = undef USE_IMP_SYS = define !ENDIF
!IF "$(PERL_MALLOC)" == "" PERL_MALLOC = undef !ENDIF
!IF "$(USE_5005THREADS)" == "" USE_5005THREADS = undef !ENDIF
!IF "$(USE_5005THREADS)" == "define" USE_ITHREADS = undef !ENDIF
!IF "$(USE_IMP_SYS)" == "define" PERL_MALLOC = undef !ENDIF
!IF "$(USE_MULTI)" == "" USE_MULTI = undef !ENDIF
!IF "$(USE_OBJECT)" == "" USE_OBJECT = undef !ENDIF
!IF "$(USE_ITHREADS)" == "" USE_ITHREADS = undef !ENDIF
!IF "$(USE_IMP_SYS)" == "" USE_IMP_SYS = undef !ENDIF
!IF "$(USE_PERLCRT)" == "" USE_PERLCRT = undef !ENDIF
!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" USE_MULTI = define !ENDIF
!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" USE_MULTI = define USE_5005THREADS = undef !ENDIF
!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT !ENDIF
!IF "$(USE_IMP_SYS)" != "undef" BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS !ENDIF
!IF "$(PROCESSOR_ARCHITECTURE)" == "" PROCESSOR_ARCHITECTURE = x86 !ENDIF
!IF "$(USE_OBJECT)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object !ELSE !IF "$(USE_5005THREADS)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread !ELSE !IF "$(USE_MULTI)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi !ELSE ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) !ENDIF !ENDIF !ENDIF
!IF "$(USE_ITHREADS)" == "define" ARCHNAME = $(ARCHNAME)-thread !ENDIF
# Visual Studio 98 specific !IF "$(CCTYPE)" == "MSVC60"
# VC 6.0 can load the socket dll on demand. Makes the test suite # run in about 10% less time. DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
# VC 6.0 seems capable of compiling perl correctly with optimizations # enabled. Anything earlier fails tests. !IF "$(CFG)" == "" CFG = Optimize !ENDIF !ENDIF
ARCHDIR = ..\lib\$(ARCHNAME) COREDIR = ..\lib\CORE AUTODIR = ..\lib\auto LIBDIR = ..\lib EXTDIR = ..\ext PODDIR = ..\pod EXTUTILSDIR = $(LIBDIR)\ExtUtils
# INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin INST_BIN = $(INST_SCRIPT)$(INST_ARCH) INST_LIB = $(INST_TOP)$(INST_VER)\lib INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) INST_COREDIR = $(INST_ARCHLIB)\CORE INST_POD = $(INST_LIB)\pod INST_HTML = $(INST_POD)\html
# # Programs to compile\, build .lib files and link #
CC = cl LINK32 = link LIB32 = $(LINK32) -lib RSC = rc
# # Options #
RUNTIME = -MD INCLUDES = -I$(COREDIR) -I.\include -I. -I.. #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) LOCDEFS = -DPERLDLL -DPERL_CORE SUBSYS = console CXX_FLAG = -TP -GX
!IF "$(USE_PERLCRT)" != "define" ! IF "$(CFG)" == "Debug" PERLCRTLIBC = msvcrtd.lib ! ELSE PERLCRTLIBC = msvcrt.lib ! ENDIF !ELSE ! IF "$(CFG)" == "Debug" PERLCRTLIBC = PerlCRTD.lib ! ELSE PERLCRTLIBC = PerlCRT.lib ! ENDIF !ENDIF
PERLEXE_RES = PERLDLL_RES =
!IF "$(RUNTIME)" == "-MD" LIBC = $(PERLCRTLIBC) !ELSE LIBC = libcmt.lib !ENDIF
!IF "$(CFG)" == "Debug" ! IF "$(CCTYPE)" == "MSVC20" OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG -DDEBUGGING ! ELSE OPTIMIZE = -Od $(RUNTIME)d -Zi -D_DEBUG -DDEBUGGING ! ENDIF LINK_DBG = -debug -pdb:none !ELSE ! IF "$(CFG)" == "Optimize" # -O1 yields smaller code\, which turns out to be faster than -O2 #OPTIMIZE = -O2 $(RUNTIME) -DNDEBUG OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG ! ELSE OPTIMIZE = -Od $(RUNTIME) -DNDEBUG ! ENDIF LINK_DBG = -release !ENDIF
!IF "$(USE_OBJECT)" == "define" OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) BUILDOPT = $(BUILDOPT) -DPERL_OBJECT !ENDIF
!IF "$(USE_PERLCRT)" != "define" BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX !ENDIF
LIBBASEFILES = $(DELAYLOAD) $(CRYPT_LIB) \ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ version.lib odbc32.lib odbccp32.lib
# we add LIBC here\, since we may be using PerlCRT.dll LIBFILES = $(LIBBASEFILES) $(LIBC)
CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ $(PCHFLAGS) $(OPTIMIZE) LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ -libpath:"$(INST_COREDIR)" \ -machine:$(PROCESSOR_ARCHITECTURE) OBJOUT_FLAG = -Fo EXEOUT_FLAG = -Fe
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
#################### do not edit below this line ####################### ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
o = .obj
# # Rules #
.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
.c$(o): $(CC) -c -I$(\<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $\<
.y.c: $(NOOP)
$(o).dll: $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ -out:$@ $(LINK_FLAGS) $(LIBFILES) $\< $(LIBPERL)
.rc.res: $(RSC) -i.. $\<
# # various targets PERLIMPLIB = ..\perl56.lib PERLDLL = ..\perl56.dll
MINIPERL = ..\miniperl.exe MINIDIR = .\mini PERLEXE = ..\perl.exe WPERLEXE = ..\wperl.exe GLOBEXE = ..\perlglob.exe CONFIGPM = ..\lib\Config.pm MINIMOD = ..\lib\ExtUtils\Miniperl.pm X2P = ..\x2p\a2p.exe
PL2BAT = bin\pl2bat.pl GLOBBAT = bin\perlglob.bat
UTILS = \ ..\utils\h2ph \ ..\utils\splain \ ..\utils\dprofpp \ ..\utils\perlbug \ ..\utils\pl2pm \ ..\utils\c2ph \ ..\utils\h2xs \ ..\utils\perldoc \ ..\utils\perlcc \ ..\pod\checkpods \ ..\pod\pod2html \ ..\pod\pod2latex \ ..\pod\pod2man \ ..\pod\pod2text \ ..\pod\pod2usage \ ..\pod\podchecker \ ..\pod\podselect \ ..\x2p\find2perl \ ..\x2p\s2p \ bin\exetype.pl \ bin\runperl.pl \ bin\pl2bat.pl \ bin\perlglob.pl \ bin\search.pl
MAKE = nmake -nologo
CFGSH_TMPL = config.vc CFGH_TMPL = config_H.vc
XCOPY = xcopy /f /r /i /d RCOPY = xcopy /f /r /i /e /d NOOP = @echo NULL =
# # filenames given to xsubpp must have forward slashes (since it puts # full pathnames in #line strings) XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ -C++ -prototypes
MICROCORE_SRC = \ ..\av.c \ ..\deb.c \ ..\doio.c \ ..\doop.c \ ..\dump.c \ ..\globals.c \ ..\gv.c \ ..\hv.c \ ..\mg.c \ ..\op.c \ ..\perl.c \ ..\perlapi.c \ ..\perly.c \ ..\pp.c \ ..\pp_ctl.c \ ..\pp_hot.c \ ..\pp_sys.c \ ..\regcomp.c \ ..\regexec.c \ ..\run.c \ ..\scope.c \ ..\sv.c \ ..\taint.c \ ..\toke.c \ ..\universal.c \ ..\utf8.c \ ..\util.c \ ..\xsutils.c
EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
!IF "$(PERL_MALLOC)" == "define" EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c !ENDIF
!IF "$(USE_OBJECT)" != "define" EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c !ENDIF
WIN32_SRC = \ .\win32.c \ .\win32sck.c \ .\win32thread.c
!IF "$(CRYPT_SRC)" != "" WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC) !ENDIF
DLL_SRC = $(DYNALOADER).c
X2P_SRC = \ ..\x2p\a2p.c \ ..\x2p\hash.c \ ..\x2p\str.c \ ..\x2p\util.c \ ..\x2p\walk.c
CORE_NOCFG_H = \ ..\av.h \ ..\cop.h \ ..\cv.h \ ..\dosish.h \ ..\embed.h \ ..\form.h \ ..\gv.h \ ..\handy.h \ ..\hv.h \ ..\iperlsys.h \ ..\mg.h \ ..\nostdio.h \ ..\op.h \ ..\opcode.h \ ..\perl.h \ ..\perlapi.h \ ..\perlsdio.h \ ..\perlsfio.h \ ..\perly.h \ ..\pp.h \ ..\proto.h \ ..\regexp.h \ ..\scope.h \ ..\sv.h \ ..\thread.h \ ..\unixish.h \ ..\utf8.h \ ..\util.h \ ..\warnings.h \ ..\XSUB.h \ ..\EXTERN.h \ ..\perlvars.h \ ..\intrpvar.h \ ..\thrdvar.h \ .\include\dirent.h \ .\include\netdb.h \ .\include\sys\socket.h \ .\win32.h
CORE_H = $(CORE_NOCFG_H) .\config.h
MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) WIN32_OBJ = $(WIN32_SRC:.c=.obj) MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ $(MINIDIR)\miniperlmain$(o) \ $(MINIDIR)\perlio$(o) MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) DLL_OBJ = $(DLL_SRC:.c=.obj) X2P_OBJ = $(X2P_SRC:.c=.obj)
PERLDLL_OBJ = $(CORE_OBJ) PERLEXE_OBJ = perlmain$(o)
PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
!IF "$(USE_SETARGV)" != "" SETARGV_OBJ = setargv$(o) !ENDIF
DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ Sys/Hostname STATIC_EXT = DynaLoader NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader SOCKET = $(EXTDIR)\Socket\Socket FCNTL = $(EXTDIR)\Fcntl\Fcntl OPCODE = $(EXTDIR)\Opcode\Opcode SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File IO = $(EXTDIR)\IO\IO POSIX = $(EXTDIR)\POSIX\POSIX ATTRS = $(EXTDIR)\attrs\attrs THREAD = $(EXTDIR)\Thread\Thread B = $(EXTDIR)\B\B RE = $(EXTDIR)\re\re DUMPER = $(EXTDIR)\Data\Dumper\Dumper ERRNO = $(EXTDIR)\Errno\Errno PEEK = $(EXTDIR)\Devel\Peek\Peek BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader DPROF = $(EXTDIR)\Devel\DProf\DProf GLOB = $(EXTDIR)\File\Glob\Glob HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll IO_DLL = $(AUTODIR)\IO\IO.dll POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll THREAD_DLL = $(AUTODIR)\Thread\Thread.dll B_DLL = $(AUTODIR)\B\B.dll DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll RE_DLL = $(AUTODIR)\re\re.dll BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
ERRNO_PM = $(LIBDIR)\Errno.pm
EXTENSION_C = \ $(SOCKET).c \ $(FCNTL).c \ $(OPCODE).c \ $(SDBM_FILE).c \ $(IO).c \ $(POSIX).c \ $(ATTRS).c \ $(THREAD).c \ $(RE).c \ $(DUMPER).c \ $(PEEK).c \ $(B).c \ $(BYTELOADER).c \ $(DPROF).c \ $(GLOB).c \ $(HOSTNAME).c
EXTENSION_DLL = \ $(SOCKET_DLL) \ $(FCNTL_DLL) \ $(OPCODE_DLL) \ $(SDBM_FILE_DLL)\ $(IO_DLL) \ $(POSIX_DLL) \ $(ATTRS_DLL) \ $(DUMPER_DLL) \ $(PEEK_DLL) \ $(B_DLL) \ $(RE_DLL) \ $(THREAD_DLL) \ $(BYTELOADER_DLL) \ $(DPROF_DLL) \ $(GLOB_DLL) \ $(HOSTNAME_DLL)
EXTENSION_PM = \ $(ERRNO_PM)
POD2HTML = $(PODDIR)\pod2html POD2MAN = $(PODDIR)\pod2man POD2LATEX = $(PODDIR)\pod2latex POD2TEXT = $(PODDIR)\pod2text
CFG_VARS = \ "INST_DRV=$(INST_DRV)" \ "INST_TOP=$(INST_TOP)" \ "INST_VER=$(INST_VER)" \ "INST_ARCH=$(INST_ARCH)" \ "archname=$(ARCHNAME)" \ "cc=$(CC)" \ "ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ "cf_email=$(EMAIL)" \ "d_crypt=$(D_CRYPT)" \ "d_mymalloc=$(PERL_MALLOC)" \ "libs=$(LIBFILES)" \ "incpath=$(CCINCDIR:"=\")" \ "libperl=$(PERLIMPLIB:..\=)" \ "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ "libc=$(LIBC)" \ "make=nmake" \ "static_ext=$(STATIC_EXT)" \ "dynamic_ext=$(DYNAMIC_EXT)" \ "nonxs_ext=$(NONXS_EXT)" \ "use5005threads=$(USE_5005THREADS)" \ "useithreads=$(USE_ITHREADS)" \ "usethreads=$(USE_5005THREADS)" \ "usemultiplicity=$(USE_MULTI)" \ "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ "optimize=$(OPTIMIZE:"=\")"
# # Top targets #
all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
#------------------------------------------------------------
$(GLOBEXE) : perlglob$(o) $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ perlglob$(o) setargv$(o)
perlglob$(o) : perlglob.c
config.w32 : $(CFGSH_TMPL) copy $(CFGSH_TMPL) config.w32
.\config.h : $(CFGH_TMPL) -del /f config.h copy $(CFGH_TMPL) config.h
..\config.sh : config.w32 $(MINIPERL) config_sh.PL $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
# this target is for when changes to the main config.sh happen # edit config.{b\,v\,g}c and make this target once for each supported # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) regen_config_h: perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh cd .. -del /f perl.exe perl configpm cd win32 -del /f $(CFGH_TMPL) -mkdir $(COREDIR) -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl cd .. && miniperl configpm if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) $(XCOPY) ..\*.h $(COREDIR)\*.* $(XCOPY) *.h $(COREDIR)\*.* $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* $(RCOPY) include $(COREDIR)\*.* $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(LINK32) -subsystem:console -out:$@ @\<\< $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) \<\<
$(MINIDIR) : if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
$(MINICORE_OBJ) : $(CORE_NOCFG_H) $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
# -DPERL_IMPLICIT_SYS needs C++ for perllib.c # This is the only file that depends on perlhost.h\, vmem.h\, and vdir.h !IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c !ENDIF
# 1. we don't want to rebuild miniperl.exe when config.h changes # 2. we don't want to rebuild miniperl.exe with non-default config.h $(MINI_OBJ) : $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H) $(CORE_OBJ) : $(CORE_H) $(DLL_OBJ) : $(CORE_H) $(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) $(LINK32) -dll -def:perldll.def -out:$@ @\<\< $(LINK_FLAGS) /base:0x28000000 $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) \<\< $(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(MINIMOD) : $(MINIPERL) ..\minimod.pl cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
..\x2p\a2p$(o) : ..\x2p\a2p.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
..\x2p\hash$(o) : ..\x2p\hash.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
..\x2p\str$(o) : ..\x2p\str.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
..\x2p\util$(o) : ..\x2p\util.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
..\x2p\walk$(o) : ..\x2p\walk.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
$(X2P) : $(MINIPERL) $(X2P_OBJ) $(MINIPERL) ..\x2p\find2perl.PL $(MINIPERL) ..\x2p\s2p.PL $(LINK32) -subsystem:console -out:$@ @\<\< $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) \<\<
perlmain.c : runperl.c copy runperl.c perlmain.c
perlmain$(o) : perlmain.c $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \ $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) copy $(PERLEXE) $(WPERLEXE) $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS copy splittree.pl .. $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) if not exist $(AUTODIR) mkdir $(AUTODIR) cd $(EXTDIR)\$(*B) ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL cd ..\..\win32 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) cd $(EXTDIR)\$(*B) $(XSUBPP) dl_win32.xs > $(*B).c cd ..\..\win32
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs cd $(EXTDIR)\Data\$(*B) ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\..\win32
$(DPROF_DLL): $(PERLEXE) $(DPROF).xs cd $(EXTDIR)\Devel\$(*B) ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\..\win32
$(GLOB_DLL): $(PERLEXE) $(GLOB).xs cd $(EXTDIR)\File\$(*B) ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\..\win32
$(PEEK_DLL): $(PERLEXE) $(PEEK).xs cd $(EXTDIR)\Devel\$(*B) ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\..\win32
$(RE_DLL): $(PERLEXE) $(RE).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(B_DLL): $(PERLEXE) $(B).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(THREAD_DLL): $(PERLEXE) $(THREAD).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(POSIX_DLL): $(PERLEXE) $(POSIX).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(IO_DLL): $(PERLEXE) $(IO).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs cd $(EXTDIR)\Sys\$(*B) ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\..\win32
$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL cd $(EXTDIR)\$(*B) ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl $(MAKE) cd ..\..\win32
doc: $(PERLEXE) $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
utils: $(PERLEXE) $(X2P) cd ..\utils $(MAKE) PERL=$(MINIPERL) cd ..\pod copy ..\README.win32 .\perlwin32.pod $(MAKE) -f ..\win32\pod.mak converters cd ..\win32 $(PERLEXE) $(PL2BAT) $(UTILS)
distclean: clean -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) -del /f *.def *.map -del /f $(EXTENSION_DLL) $(EXTENSION_PM) -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm -del /f $(EXTDIR)\DynaLoader\dl_win32.xs -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm -del /f $(LIBDIR)\XSLoader.pm -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm -del /f $(LIBDIR)\File\Glob.pm -rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO -rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread -rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data -del /f $(PODDIR)\*.html -del /f $(PODDIR)\*.bat cd ..\utils -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp -del /f *.bat cd ..\win32 cd ..\x2p -del /f find2perl s2p -del /f *.bat cd ..\win32 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new -del /f $(CONFIGPM) -del /f bin\*.bat cd $(EXTDIR) -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib cd ..\win32 -rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) -rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
install : all installbare # installhtml
installbare : utils $(PERLEXE) ..\installperl if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc $(RCOPY) html\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM) copy splittree.pl .. $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) $(RCOPY) ..\lib $(INST_LIB)\*.*
minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(XCOPY) $(MINIPERL) ..\t\perl.exe $(XCOPY) $(GLOBEXE) ..\t\$(NULL) attrib -r ..\t\*.* copy test ..\t cd ..\t $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t cd ..\win32
test-prep : all utils $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
test : test-prep cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
test-notty : test-prep set PERL_SKIP_TTY_TEST=1 cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
test-wide : test-prep set HARNESS_PERL_SWITCHES=-C cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
test-wide-notty : test-prep set PERL_SKIP_TTY_TEST=1 set HARNESS_PERL_SWITCHES=-C cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
clean : -@erase miniperlmain$(o) -@erase $(MINIPERL) -@erase perlglob$(o) -@erase perlmain$(o) -@erase config.w32 -@erase /f config.h -@erase $(GLOBEXE) -@erase $(PERLEXE) -@erase $(WPERLEXE) -@erase $(PERLDLL) -@erase $(CORE_OBJ) -rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) -@erase $(WIN32_OBJ) -@erase $(DLL_OBJ) -@erase $(X2P_OBJ) -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat -@erase ..\x2p\*.exe ..\x2p\*.bat -@erase *.ilk -@erase *.pdb
Migrated from rt.perl.org#2321 (status was 'resolved')
Searchable as RT2321$