ASAN and threads don't play well together on Linux with clang

[jkeenan]

Inspired by some discussion on #p5p, I decided to try to build a perl on Linux (Debian 11) with clang and ASAN. I make no claim to knowing what I'm doing in ASAN territory; I did not have any clear idea of what the results would be. I found that when I configured with arguments similar to those used in George Greer's smoke-testing reports (e.g., https://perl5.test-smoke.org/report/5030661), I was able to get at least as far as building miniperl with ASAN and unthreaded builds -- but not with threaded builds.

Threaded builds

I've tried the following at tags v5.34.0 and v5.36.0 as well as blead.

sh ./Configure -des -Dusedevel -Dcc=clang \
-Accflags="-g -fno-omit-frame-pointer -fsanitize=address  -fno-common -fsanitize-blacklist=`pwd`/asan_ignore" -Aldflags="-fsanitize=address" \
-Duseithreads \
&& make miniperl

Compilation failed like this:

...
    opmini.o perlmini.o  gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro_core.o keywords.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o caretx.o dquote.o time64.o  miniperlmain.o  -lpthread -lnsl -ldl -lm -lcrypt -lutil -lc 
./miniperl -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl.  Please run make minitest; exit 1'

=================================================================
==747495==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 4072 byte(s) in 1 object(s) allocated from:
    #0 0x49ce02 in calloc (/home/jkeenan/gitwork/perl/miniperl+0x49ce02)

... followed by a long list of direct and indirect leaks.

Unthreaded builds

If I simply dropped the -Duseithreads from the configuration, miniperl would build on v5.34.0, v5.36.0 and blead (v5.37.8-172-gd0613d9c78).

$ clang --version | head -1
Debian clang version 11.0.1-2

On v5.34.0, in the ASAN unthreaded build, I got 2 test failures in make test_harness:

Test Summary Report
-------------------
re/pat.t                                                           (Wstat: 9 Tests: 108 Failed: 0)
  Non-zero wait status: 9
  Parse errors: Bad plan.  You planned 1022 tests but ran 108.
../cpan/Encode/t/mime-header.t                                     (Wstat: 9 Tests: 207 Failed: 0)
  Non-zero wait status: 9
  Parse errors: Bad plan.  You planned 266 tests but ran 207.
Files=2667, Tests=1185872, 2052 wallclock secs (205.45 usr 77.94 sys + 1519.58 cusr 382.20 csys = 2185.17 CPU)
Result: FAIL
make: *** [makefile:839: test_harness] Error 2

However, when I tested just those two files, I got a PASS.

$ cd t; TEST_JOBS=1 ./perl harness re/pat.t ../cpan/Encode/t/mime-header.t; cd -
re/pat.t ........................ ok         
../cpan/Encode/t/mime-header.t .. ok       
All tests successful.
Files=2, Tests=1288, 119 wallclock secs ( 0.20 usr  0.02 sys + 33.00 cusr 85.63 csys = 118.85 CPU)
Result: PASS

(I didn't completely test v5.36.0.)

On blead, in the ASAN unthreaded build, I got 4 test failures:

$ git describe; ./perl -Ilib -V:config_args
v5.37.8-172-gd0613d9c78
config_args='-des -Dusedevel -Dcc=clang -Accflags=-g -fno-omit-frame-pointer -fsanitize=address  -fno-common -fsanitize-blacklist=/home/jkeenan/gitwork/perl/asan_ignore -Aldflags=-fsanitize=address';
...
Test Summary Report
-------------------
re/bigfuzzy_not_utf8.t                                             (Wstat: 0 Tests: 1 Failed: 1)
  Failed test:  1
re/pat.t                                                           (Wstat: 9 (Signal: KILL) Tests: 276 Failed: 0)
  Non-zero wait status: 9
  Parse errors: Bad plan.  You planned 1230 tests but ran 276.
re/pat_psycho.t                                                    (Wstat: 9 (Signal: KILL) Tests: 1 Failed: 0)
  Non-zero wait status: 9
  Parse errors: Bad plan.  You planned 15 tests but ran 1.
../lib/warnings.t                                                  (Wstat: 0 Tests: 940 Failed: 1)
  Failed test:  380
Files=2738, Tests=1180601, 1983 wallclock secs (193.95 usr 69.90 sys + 1533.20 cusr 347.26 csys = 2144.31 CPU)
Result: FAIL
Finished test run at Tue Feb 14 23:59:37 2023.
make: *** [makefile:865: test_harness] Error 2

Re-running just the failing files, I got 3 PASSes and 1 FAIL.

$ cd t; TEST_JOBS=1 ./perl harness re/bigfuzzy_not_utf8.t re/pat.t re/pat_psycho.t ../lib/warnings.t; cd -
re/bigfuzzy_not_utf8.t .. ok   
re/pat.t ................ ok         
re/pat_psycho.t ......... ok  
../lib/warnings.t ....... 356/940 FILE: lib/warnings/class ; line 13
PROG: 
# constructor warnings
use v5.36;
use feature 'class';
no warnings 'experimental::class';
class C { }
C->new();
eval { C->new('foo') }; # suppress error
EXPECTED:
Odd number of arguments passed to "C" constructor at - line 7.
GOT:
Odd number of arguments passed to "C" constructor at - line 7.

=================================================================
==857841==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 1 byte(s) in 1 object(s) allocated from:
    #0 0x4b1bcd in malloc (/home/jkeenan/gitwork/perl/perl+0x4b1bcd)
    #1 0x749e54 in Perl_safesysmalloc /home/jkeenan/gitwork/perl/util.c:161:21
    #2 0x7949d7 in Perl_newSVobject /home/jkeenan/gitwork/perl/class.c:40:5
    #3 0x796234 in injected_constructor /home/jkeenan/gitwork/perl/class.c:162:20
    #4 0x7dea53 in Perl_pp_entersub /home/jkeenan/gitwork/perl/pp_hot.c:5518:9
    #5 0x7bb319 in Perl_runops_standard /home/jkeenan/gitwork/perl/run.c:41:26
    #6 0x55639e in S_run_body /home/jkeenan/gitwork/perl/perl.c
    #7 0x555751 in perl_run /home/jkeenan/gitwork/perl/perl.c:2722:9
    #8 0x4e19ae in main /home/jkeenan/gitwork/perl/perlmain.c:127:9
    #9 0x7f6e22f5ad09 in __libc_start_main csu/../csu/libc-start.c:308:16

SUMMARY: AddressSanitizer: 1 byte(s) leaked in 1 allocation(s).
# Failed test 380 - test from lib/warnings/class at line 13 at lib/warnings/class line 13
../lib/warnings.t ....... 933/940 #
# Note: 'run_multiple_progs' run has one or more failures
#        you can consider setting the environment variable
#        PERL_TEST_ABORT_FIRST_FAILURE=1 before running the test
#        to stop on the first error.
#
../lib/warnings.t ....... Failed 1/940 subtests 
    (less 1 skipped subtest: 938 okay)

Test Summary Report
-------------------
../lib/warnings.t     (Wstat: 0 Tests: 940 Failed: 1)
  Failed test:  380
Files=4, Tests=2186, 126 wallclock secs ( 0.57 usr  0.09 sys + 46.67 cusr 78.61 csys = 125.94 CPU)

To what extent are these results plausible? First, failure to get as far as miniperl with clang, ASAN and threads?

Second, inconsistent test failures with ASAN but without threads?

[dur-randir]

Compilation failed like this:

This is not a direct compilation failure, this is a build step (that involves calling perl code) failure. ASAN will detect false-positives without PERL_DESTRUCT_LEVEL=2 set, so you should call export PERL_DESTRUCT_LEVEL=2 before inspecting anything involving leaks. Or, alternatively, call export ASAN_OPTIONS=detect_leaks=false to disable leaks detection altogether.

For me, threaded build finished successfully with PERL_DESTRUCT_LEVEL set on threaded blead.

On blead, in the ASAN unthreaded build, I got 4 test failures: Signal: KILL

Combined with single test PASS'es this looks like some limits being hit - memory? kernel? especially when tests are run in parallel - ASAN involves enormous VIRT allocations, which are not without overhead.

[jkeenan]

Compilation failed like this:

This is not a direct compilation failure, this is a build step (that involves calling perl code) failure. ASAN will detect false-positives without PERL_DESTRUCT_LEVEL=2 set, so you should call export PERL_DESTRUCT_LEVEL=2 before inspecting anything involving leaks. Or, alternatively, call export ASAN_OPTIONS=detect_leaks=false to disable leaks detection altogether.

For me, threaded build finished successfully with PERL_DESTRUCT_LEVEL set on threaded blead.

On blead, in the ASAN unthreaded build, I got 4 test failures: Signal: KILL

Combined with single test PASS'es this looks like some limits being hit - memory? kernel? especially when tests are run in parallel - ASAN involves enormous VIRT allocations, which are not without overhead.

Thanks for looking into this. I set PERL_DESTRUCT_LEVEL=2 as you suggested, then built a perl using clang, threaded, ASAN.

$ ./perl -Ilib -V:config_args; env | grep DESTRUCT
config_args='-des -Dusedevel -Dcc=clang -Accflags=-g -fno-omit-frame-pointer -fsanitize=address  -fno-common -fsanitize-blacklist=/home/jkeenan/gitwork/perl/asan_ignore -Aldflags=-fsanitize=address -Duseithreads';
PERL_DESTRUCT_LEVEL=2

miniperl and perl both built successfully. make test_harness displayed failures in these 4 files:

Test Summary Report
-------------------
lib/croak.t                                                        (Wstat: 0 Tests: 215 Failed: 15)
  Failed tests:  1-11, 13-16
re/pat.t                                                           (Wstat: 9 (Signal: KILL) Tests: 276 Failed: 0)
  Non-zero wait status: 9
  Parse errors: Bad plan.  You planned 1230 tests but ran 276.
re/pat_psycho_thr.t                                                (Wstat: 9 (Signal: KILL) Tests: 10 Failed: 0)
  Non-zero wait status: 9
  Parse errors: Bad plan.  You planned 15 tests but ran 10.
re/pat_psycho.t                                                    (Wstat: 9 (Signal: KILL) Tests: 0 Failed: 0)
  Non-zero wait status: 9
  Parse errors: Bad plan.  You planned 15 tests but ran 0.
../lib/warnings.t                                                  (Wstat: 0 Tests: 940 Failed: 4)
  Failed tests:  379-382

Re-running those files one at a time, I got these results:

$ cd t; TEST_JOBS=1 ./perl harness lib/croak.t re/pat.t re/pat_psycho_thr.t re/pat_psycho.t; cd -
...
lib/croak.t .......... 177/215 #
# Note: 'run_multiple_progs' run has one or more failures
#        you can consider setting the environment variable
#        PERL_TEST_ABORT_FIRST_FAILURE=1 before running the test
#        to stop on the first error.
#
lib/croak.t .......... Failed 15/215 subtests 
    (less 3 skipped subtests: 197 okay)
re/pat.t ............. ok         
re/pat_psycho_thr.t .. ok     
re/pat_psycho.t ...... ok     

Test Summary Report
-------------------
lib/croak.t        (Wstat: 0 Tests: 215 Failed: 15)
  Failed tests:  1-11, 13-16
Files=4, Tests=1475, 96 wallclock secs ( 0.29 usr  0.04 sys + 43.63 cusr 51.04 csys = 95.00 CPU)
Result: FAIL

[tonycoz]

$ ./perl -Ilib -V:config_args; env | grep DESTRUCT config_args='-des -Dusedevel -Dcc=clang -Accflags=-g -fno-omit-frame-pointer -fsanitize=address -fno-common -fsanitize-blacklist=/home/jkeenan/gitwork/perl/asan_ignore -Aldflags=-fsanitize=address -Duseithreads'; PERL_DESTRUCT_LEVEL=2

I'm not sure what this is meant to demonstrate.

You need to set PERL_DESTRUCT_LEVEL=2 in the environment, not in Configure, eg with bash:

$ PERL_DESTRUCT_LEVEL=2 TEST_JOBS=2 make -j2 test_harness

building 5.36.0 with the Debian clang, configured:

$ ./Configure -des -Dusedevel -Dcc=clang -Dusethreads -Accflags=-fsanitize=address -Aldflags=-fsanitize=address -Dlddlflags=-shared\ -fsanitize=address

successfully compiled and tested.

blead has known leaks, addressed by #20809 and #20812

[jkeenan]

On 2/15/23 19:10, Tony Cook wrote:

$ ./perl -Ilib -V:config_args; env | grep DESTRUCT
config_args='-des -Dusedevel -Dcc=clang -Accflags=-g
-fno-omit-frame-pointer -fsanitize=address -fno-common
-fsanitize-blacklist=/home/jkeenan/gitwork/perl/asan_ignore
-Aldflags=-fsanitize=address -Duseithreads';
PERL_DESTRUCT_LEVEL=2

I'm not sure what this is meant to demonstrate.

You need to set PERL_DESTRUCT_LEVEL=2 in the environment, not in Configure, eg with bash:

That's what I did. I just wanted to print out both the config_args and the relevant envvar in a compact way after I had run test_harness.

If I get a chance I'll try to run this configuration on those pull requests.

[tonycoz]

The last part of this should be fixed by 080297a1c054c421f95cf78ca4f58a960f1d124f.

[jkeenan]

Here is an update on my attempts to build and test perl on Debian Linux using clang (version 11) with ASAN.

$ uname -a
Linux bullseye 5.10.0-18-amd64 #1 SMP Debian 5.10.140-1 (2022-09-02) x86_64 GNU/Linux

$ clang-11 --version | head -n 1
Debian clang version 11.0.1-2

$ git describe
v5.39.3-11-gb0cb9aaabb

$ export PERL_DESTRUCT_LEVEL=2

$ sh ./Configure -des -Dusedevel -Dcc=clang \
-Accflags="-g -fno-omit-frame-pointer -fsanitize=address  -fno-common -fsanitize-blacklist=`pwd`/asan_ignore" -Aldflags="-fsanitize=address" \
-Duseithreads \
&& make miniperl

This completed successfully, as did make minitest. I then ran make test_harness where $TEST_JOBS defaulted to 4. I got test failures in 4 files, which I then re-ran individually:

$ cd t; TEST_JOBS=1 ./perl harness re/pat.t re/pat_psycho_thr.t run/locale.t re/pat_psycho.t; cd -

I still got one test failure:

run/locale.t ......... 41/? # Failed test 41 - check that setlocale overrides startup at run/locale.t line 580
#      got "ok\n\n=================================================================\n==2789493==ERROR: LeakSanitizer: detected memory leaks\n\nDirect leak of 168 byte(s) in 1 object(s) allocated from:\n    #0 0x4aecad in malloc (/home/jkeenan/gitwork/perl/perl+0x4aecad)\n    #1 0x75e094 in Perl_safesysmalloc /home/jkeenan/gitwork/perl/util.c:159:21\n    #2 0x99f70c in S_calculate_LC_ALL_string /home/jkeenan/gitwork/perl/locale.c:2925:13\n    #3 0x9980ba in S_native_querylocale_i /home/jkeenan/gitwork/perl/locale.c:4272:12\n    #4 0x9980ba in Perl_setlocale /home/jkeenan/gitwork/perl/locale.c:4381:35\n    #5 0x7fd650cab0b9 in XS_POSIX_setlocale /home/jkeenan/gitwork/perl/ext/POSIX/POSIX.xs:2074:20\n    #6 0x7fca4c in Perl_rpp_invoke_xs /home/jkeenan/gitwork/perl/./inline.h:859:9\n    #7 0x7fca4c in Perl_pp_entersub /home/jkeenan/gitwork/perl/pp_hot.c:5910:9\n    #8 0x7d870c in Perl_runops_standard /home/jkeenan/gitwork/perl/run.c:41:26\n    #9 0x556c9b in S_run_body /home/jkeenan/gitwork/perl/perl.c\n    #10 0x556036 in perl_run /home/jkeenan/gitwork/perl/perl.c:2725:9\n    #11 0x4deaa9 in main /home/jkeenan/gitwork/perl/perlmain.c:127:9\n    #12 0x7fd653d09d09 in __libc_start_main csu/../csu/libc-start.c:308:16\n\nSUMMARY: AddressSanitizer: 168 byte(s) leaked in 1 allocation(s)."
# expected "ok"
#  diff at 2
#    after "ok"
#     have "\n\n======================================"
#     want ""
# PROG: 
#     use POSIX;
# 
#     my $a_acute = "\N{LATIN SMALL LETTER A WITH ACUTE}";
#     my $egrave  = "\N{LATIN SMALL LETTER E WITH GRAVE}";
#     my $combo = "$a_acute.$egrave";
# 
#     setlocale(&POSIX::LC_ALL, "C");
#     use locale;
# 
#     # In a UTF-8 locale, \b matches Latin1 before string, mid, and end
#     if ($combo eq ($combo =~ s/\b/!/gr)) {
#         print "ok\n";
#     }
#     else {
#         print "not ok\n";
#     }
# STATUS: 256

=================================================================
==2789468==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 281 byte(s) in 1 object(s) allocated from:
    #0 0x4aecad in malloc (/home/jkeenan/gitwork/perl/perl+0x4aecad)
    #1 0x75e094 in Perl_safesysmalloc /home/jkeenan/gitwork/perl/util.c:159:21
    #2 0x99f70c in S_calculate_LC_ALL_string /home/jkeenan/gitwork/perl/locale.c:2925:13
    #3 0x9980ba in S_native_querylocale_i /home/jkeenan/gitwork/perl/locale.c:4272:12
    #4 0x9980ba in Perl_setlocale /home/jkeenan/gitwork/perl/locale.c:4381:35
    #5 0x7ff1ed4ab0b9 in XS_POSIX_setlocale /home/jkeenan/gitwork/perl/ext/POSIX/POSIX.xs:2074:20
    #6 0x7fca4c in Perl_rpp_invoke_xs /home/jkeenan/gitwork/perl/./inline.h:859:9
    #7 0x7fca4c in Perl_pp_entersub /home/jkeenan/gitwork/perl/pp_hot.c:5910:9
    #8 0x7d870c in Perl_runops_standard /home/jkeenan/gitwork/perl/run.c:41:26
    #9 0x556c9b in S_run_body /home/jkeenan/gitwork/perl/perl.c
    #10 0x556036 in perl_run /home/jkeenan/gitwork/perl/perl.c:2725:9
    #11 0x4deaa9 in main /home/jkeenan/gitwork/perl/perlmain.c:127:9
    #12 0x7ff1f04e2d09 in __libc_start_main csu/../csu/libc-start.c:308:16

SUMMARY: AddressSanitizer: 281 byte(s) leaked in 1 allocation(s).
run/locale.t ......... Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/42 subtests 
    (less 31 skipped subtests: 10 okay)
re/pat_psycho.t ...... ok     

Test Summary Report
-------------------
run/locale.t       (Wstat: 256 (exited 1) Tests: 42 Failed: 1)
  Failed test:  41
  Non-zero exit status: 1
Files=4, Tests=1337, 162 wallclock secs ( 0.26 usr  0.03 sys + 52.34 cusr 108.81 csys = 161.44 CPU)
Result: FAIL
Finished test run at Fri Sep 22 19:26:36 2023.
/home/jkeenan/gitwork/perl

And I got similar failure output simply running ./perl -Ilib t/run/locale.t.

[tonycoz]

That's a different failure to your original report.

[jkeenan]

That's a different failure to your original report.

True ... but the original report was from 7 months ago, and a lot has changed since then (especially with locales).

[khwilliamson]

I successfully run ASAN clang version 14.0.0-1ubuntu1.1 all the time

[iabyn]

On Sat, Sep 23, 2023 at 08:46:26PM -0700, Karl Williamson wrote:

I successfully run ASAN clang version 14.0.0-1ubuntu1.1 all the time

Some smokers have been failing locale tests under ASAN since around v5.39.2-97, 2f7afdcea1. E.g.:

From: George Greer @.> Message-Id: @.> To: @.*** Date: Sat, 23 Sep 2023 20:15 -0400 Subject: Smoke [blead] v5.39.3-16-gde4a70f325 FAIL(F) linux 6.4.15-200.fc38.x86_64 [Fedora Linux 38] (x86_64/1 cpu[8 cores]) {blead_clang_quick_sanitize=address}

Enabled stack-use-after-return (Linux/Darwin) and leak-detection (Linux). Smok e logs available at http://m-l.org/~perl/smoke/perl/x86_64-linux-thread-multi/b lead_clang_quick_sanitize=address/logde4a70f325814c204a79d4d025b3c464f70088bb.l og.gz

Automated smoke report for branch blead 5.39.4 patch de4a70f325814c204a79d4d025 b3c464f70088bb v5.39.3-16-gde4a70f325 vier.local: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz (GenuineIntel 4675MHz) (x8 6_64/1 cpu[8 cores]) on linux - 6.4.15-200.fc38.x86_64 [Fedora Linux 38] using ccache clang version Clang 16.0.6 (Fedora 16.0.6-3.fc38) smoketime 3 hours 50 minutes (average 57 minutes 40 seconds)

Summary: FAIL(F)

O = OK F = Failure(s), extended report at the bottom X = Failure(s) under TEST but not under harness ? = still running or test results not (yet) available Build failures during: - = unknown or N/A c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.39.3-16-gde4a70f325 Configuration (common) -Accflags="-g -fno-omit-frame-po inter -fsanitize=address -fno-common -fsanitize-blacklist=pwd/asan_ignore" - Aldflags="-fsanitize=address" -Dcc="ccache clang"

---

F F F F -Duseithreads | +--------- -DDEBUGGING +----------- no debugging

Testsuite was run only with 'harness' and HARNESS_OPTIONS=j4

Failures: (common-args) -Accflags="-g -fno-omit-frame-pointer -fsanitize=addres s -fno-common -fsanitize-blacklist=pwd/asan_ignore" -Aldflags="-fsanitize=ad dress" -Dcc="ccache clang" [default] [default] -DDEBUGGING [default] -Duseithreads [default] -DDEBUGGING -Duseithreads ../ext/XS-APItest/t/locale.t................................FAILED Non-zero exit status: 1 ../lib/locale.t.............................................FAILED Non-zero exit status: 1 ../t/run/locale.t...........................................FAILED 42 Non-zero exit status: 1

MANIFEST did not declare '.mailmap' (See log because mailing list size limit is too small.) Non-Fatal messages(gcc):

-- Report by Test::Smoke v1.72 running on perl 5.36.1 (Reporter v0.053 / Smoker v0.046)

[tonycoz]

It looks like calculate_LC_ALL_string() doesn't handle returning == WANT_PL_setlocale_buf, though the only mentions of WANT_PL_setlocale_buf are the definition in perl.h and the call to calculate_LC_ALL_string().

[khwilliamson]

On 9/24/23 18:56, Tony Cook wrote:

It looks like calculate_LC_ALL_string() doesn't handle |returning == WANT_PL_setlocale_buf|, though the only mentions of |WANT_PL_setlocale_buf| are the definition in |perl.h| and the call to calculate_LC_ALL_string().

It appears to be a problem caused during rebasing. I'm looking into it.

— Reply to this email directly, view it on GitHub https://github.com/Perl/perl5/issues/20810#issuecomment-1732738922, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAA2DH6MFPBBIFKG6QF45SDX4DJE3ANCNFSM6AAAAAAU4HEMXI. You are receiving this because you commented.Message ID: @.***>

[khwilliamson]

I have pushed a smoke branch which hopefully fixes it. Results are at https://perl.develop-help.com/?b=smoke-me%2Fkhw-WANT, and anyone can test it themselves by checking out the branch smoke-me/khw-WANT

[tonycoz]

It looks good in smokes, corresponding reports from blead https://perl5.test-smoke.org/report/5040808 and khw-WANT https://perl5.test-smoke.org/report/5040814

[jkeenan]

It looks good in smokes, corresponding reports from blead https://perl5.test-smoke.org/report/5040808 and khw-WANT https://perl5.test-smoke.org/report/5040814

My results, on the Linux where I've been playing with ASAN.

$ git checkout smoke-me/khw-WANT
$ export PERL_DESTRUCT_LEVEL=2
$ sh ./Configure -des -Dusedevel -Dcc=clang -Accflags='-g -fno-omit-frame-pointer -fsanitize=address  -fno-common -fsanitize-blacklist=/home/jkeenan/gitwork/perl/asan_ignore' -Aldflags=-fsanitize=address -Duseithreads && make minitest_prep
$ make minitest && make test
...
All tests successful.

[jkeenan]

I have created a pull request from @khwilliamson's smoke-me/khw-WANT branch mentioned above.