Closed p5pRT closed 21 years ago
p5pRT
commented
22 years ago When I try to install perl-5.8.0 on windows 98\, I get the following errors;
F:\perl-5.8.0\win32>dmake install del /f config.h DMAKE.EXE: Error -- \bin\sh: No such file or directory
F:\perl-5.8.0\win32>make install Makefile:200: *** missing separator. Stop.
What should I do to remedy this?
Alicia Hopkins
p5pRT
commented
22 years ago # # Makefile to build perl on Windows NT using Microsoft NMAKE. # Supported compilers: # Visual C++ 2.0 through 6.0 (and possibly newer versions) # MS Platform SDK 64-bit compiler and tools **experimental** # # This is set up to build a perl.exe that runs off a shared library # (perl58.dll). Also makes individual DLLs for the XS extensions. #
## ## Make sure you read README.win32 *before* you mess with anything here! ##
## ## Build configuration. Edit the values below to suit your needs. ##
# # Set these to wherever you want "nmake install" to put your # newly built perl. # INST_DRV = c: INST_TOP = $(INST_DRV)\perl
# # Comment this out if you DON'T want your perl installation to be versioned. # This means that the new installation will overwrite any files from the # old installation at the same INST_TOP location. Leaving it enabled is # the safest route\, as perl adds the extra version directory to all the # locations it installs files to. If you disable it\, an alternative # versioned installation can be obtained by setting INST_TOP above to a # path that includes an arbitrary version string. # #INST_VER = \5.8.0
# # Comment this out if you DON'T want your perl installation to have # architecture specific components. This means that architecture- # specific files will be installed along with the architecture-neutral # files. Leaving it enabled is safer and more flexible\, in case you # want to build multiple flavors of perl and install them together in # the same location. Commenting it out gives you a simpler # installation that is easier to understand for beginners. # #INST_ARCH = \$(ARCHNAME)
# # uncomment to enable multiple interpreters. This is need for fork() # emulation and for thread support. # USE_MULTI = define
# # Beginnings of interpreter cloning/threads; now reasonably complete. # This should be enabled to get the fork() emulation. This needs # USE_MULTI as well. # USE_ITHREADS = define
# # uncomment to enable the implicit "host" layer for all system calls # made by perl. This needs USE_MULTI above. This is also needed to # get fork(). # USE_IMP_SYS = define
# # Comment out next assign to disable perl's I/O subsystem and use compiler's # stdio for IO - depending on your compiler vendor and run time library you may # then get a number of fails from make test i.e. bugs - complain to them not us ;-). # You will also be unable to take full advantage of perl5.8's support for multiple # encodings and may see lower IO performance. You have been warned. USE_PERLIO = define
# # WARNING! This option is deprecated and will eventually go away (enable # USE_ITHREADS instead). # # uncomment to enable threads-capabilities. This is incompatible with # USE_ITHREADS\, and is only here for people who may have come to rely # on the experimental Thread support that was in 5.005. # #USE_5005THREADS = define
# # uncomment one of the following lines if you are using either # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98) # #CCTYPE = MSVC20 #CCTYPE = MSVC60
# # uncomment next line if you want debug version of perl (big\,slow) # If not enabled\, we automatically try to use maximum optimization # with all compilers that are known to have a working optimizer. # #CFG = Debug
# # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. # It has patches that fix known bugs in older versions of MSVCRT.DLL. # This currently requires VC 5.0 with Service Pack 3 or later. # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/ # and follow the directions in the package to install. # # Not recommended if you have VC 6.x and you're not running Windows 9x. # #USE_PERLCRT = define
# # uncomment to enable linking with setargv.obj under the Visual C # compiler. Setting this options enables perl to expand wildcards in # arguments\, but it may be harder to use alternate methods like # File::DosGlob that are more powerful. This option is supported only with # Visual C. # #USE_SETARGV = define
# # if you have the source for des_fcrypt()\, uncomment this and make sure the # file exists (see README.win32). File should be located in the same # directory as this file. # #CRYPT_SRC = fcrypt.c
# # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a # library\, uncomment this\, and make sure the library exists (see README.win32) # Specify the full pathname of the library. # #CRYPT_LIB = fcrypt.lib
# # set this if you wish to use perl's malloc # WARNING: Turning this on/off WILL break binary compatibility with extensions # you may have compiled with/without it. Be prepared to recompile all # extensions if you change the default. Currently\, this cannot be enabled # if you ask for USE_IMP_SYS above. # #PERL_MALLOC = define
# # set the install locations of the compiler include/libraries # Running VCVARS32.BAT is *required* when using Visual C. # Some versions of Visual C don't define MSVCDIR in the environment\, # so you may have to set CCHOME explicitly (spaces in the path name should # not be quoted) # #CCHOME = f:\msvc20 CCHOME = $(MSVCDIR) CCINCDIR = $(CCHOME)\include CCLIBDIR = $(CCHOME)\lib
# # Additional compiler flags can be specified here. #
# # This should normally be disabled. Adding -DPERL_POLLUTE enables support # for old symbols by default\, at the expense of extreme pollution. You most # probably just want to build modules that won't compile with # perl Makefile.PL POLLUTE=1 # instead of enabling this. Please report such modules to the respective # authors. # #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
# # This should normally be disabled. Enabling it will disable the File::Glob # implementation of CORE::glob. # #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
# # This should normally be disabled. Enabling it causes perl to read scripts # in text mode (which is the 5.005 behavior) and will break ByteLoader. #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
# # specify semicolon-separated list of extra directories that modules will # look for libraries (spaces in path names need not be quoted) # EXTRALIBDIRS =
# # set this to your email address (perl will guess a value from # from your loginname and your hostname\, which may not be right) # #EMAIL =
## ## Build configuration ends. ##
##################### CHANGE THESE ONLY IF YOU MUST #####################
!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" D_CRYPT = undef !ELSE D_CRYPT = define CRYPT_FLAG = -DHAVE_DES_FCRYPT !ENDIF
!IF "$(PERL_MALLOC)" == "" PERL_MALLOC = undef !ENDIF
!IF "$(USE_5005THREADS)" == "" USE_5005THREADS = undef !ENDIF
!IF "$(USE_5005THREADS)" == "define" USE_ITHREADS = undef !ENDIF
!IF "$(USE_IMP_SYS)" == "define" PERL_MALLOC = undef !ENDIF
!IF "$(USE_MULTI)" == "" USE_MULTI = undef !ENDIF
!IF "$(USE_ITHREADS)" == "" USE_ITHREADS = undef !ENDIF
!IF "$(USE_IMP_SYS)" == "" USE_IMP_SYS = undef !ENDIF
!IF "$(USE_PERLIO)" == "" USE_PERLIO = undef !ENDIF
!IF "$(USE_PERLCRT)" == "" USE_PERLCRT = undef !ENDIF
!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef" USE_MULTI = define !ENDIF
!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef" USE_MULTI = define USE_5005THREADS = undef !ENDIF
!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef" BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT !ENDIF
!IF "$(USE_IMP_SYS)" != "undef" BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS !ENDIF
!IF "$(PROCESSOR_ARCHITECTURE)" == "" PROCESSOR_ARCHITECTURE = x86 !ENDIF
!IF "$(WIN64)" == "" !IF "$(PROCESSOR_ARCHITEW6432)" != "" PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432) WIN64 = define !ELSE !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64" WIN64 = define !ELSE WIN64 = undef !ENDIF !ENDIF !ENDIF
!IF "$(USE_5005THREADS)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread !ELSE !IF "$(USE_MULTI)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi !ELSE !IF "$(USE_PERLIO)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio !ELSE ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) !ENDIF !ENDIF !ENDIF
!IF "$(USE_PERLIO)" == "define" BUILDOPT = $(BUILDOPT) -DUSE_PERLIO !ENDIF
!IF "$(USE_ITHREADS)" == "define" ARCHNAME = $(ARCHNAME)-thread !ENDIF
# Visual Studio 98 specific !IF "$(CCTYPE)" == "MSVC60"
# VC 6.0 can load the socket dll on demand. Makes the test suite # run in about 10% less time. DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib !ENDIF
ARCHDIR = ..\lib\$(ARCHNAME) COREDIR = ..\lib\CORE AUTODIR = ..\lib\auto LIBDIR = ..\lib EXTDIR = ..\ext PODDIR = ..\pod EXTUTILSDIR = $(LIBDIR)\ExtUtils
# INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin INST_BIN = $(INST_SCRIPT)$(INST_ARCH) INST_LIB = $(INST_TOP)$(INST_VER)\lib INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) INST_COREDIR = $(INST_ARCHLIB)\CORE INST_POD = $(INST_LIB)\pod INST_HTML = $(INST_TOP)$(INST_VER)\html
# # Programs to compile\, build .lib files and link #
CC = gcc LINK32 = ld LIB32 = $(LINK32) -lib RSC = rc
# # Options #
INCLUDES = -I$(COREDIR) -I.\include -I. -I.. #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) LOCDEFS = -DPERLDLL -DPERL_CORE SUBSYS = console CXX_FLAG = -TP -GX
!IF "$(USE_PERLCRT)" != "define" LIBC = msvcrt.lib !ELSE LIBC = PerlCRT.lib !ENDIF
PERLEXE_RES = PERLDLL_RES =
!IF "$(CFG)" == "Debug" ! IF "$(CCTYPE)" == "MSVC20" OPTIMIZE = -Od -MD -Z7 -DDEBUGGING ! ELSE OPTIMIZE = -Od -MD -Zi -DDEBUGGING ! ENDIF LINK_DBG = -debug !ELSE OPTIMIZE = -MD -DNDEBUG LINK_DBG = -release ! IF "$(WIN64)" == "define" # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG) OPTIMIZE = $(OPTIMIZE) -Ox -GL LINK_DBG = $(LINK_DBG) -ltcg ! ELSE # -O1 yields smaller code\, which turns out to be faster than -O2 on x86 OPTIMIZE = $(OPTIMIZE) -O1 #OPTIMIZE = $(OPTIMIZE) -O2 ! ENDIF !ENDIF
!IF "$(WIN64)" == "define" DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE OPTIMIZE = $(OPTIMIZE) -Wp64 -Op !ENDIF
!IF "$(USE_PERLCRT)" != "define" BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX !ENDIF
LIBBASEFILES = $(CRYPT_LIB) \ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ version.lib
# win64 doesn't have some libs !IF "$(WIN64)" != "define" LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib !ENDIF
# we add LIBC here\, since we may be using PerlCRT.dll LIBFILES = $(LIBBASEFILES) $(LIBC)
CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ $(PCHFLAGS) $(OPTIMIZE) LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ -libpath:"$(INST_COREDIR)" \ -machine:$(PROCESSOR_ARCHITECTURE) OBJOUT_FLAG = -Fo EXEOUT_FLAG = -Fe
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
#################### do not edit below this line ####################### ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
o = .obj
# # Rules #
....SUFFIXES : .c $(o) .dll .lib .exe .rc .res
....c$(o): $(CC) -c -I$(\<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $\<
....y.c: $(NOOP)
$(o).dll: $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ -out:$@ $(LINK_FLAGS) $(LIBFILES) $\< $(LIBPERL)
....rc.res: $(RSC) -i.. $\<
# # various targets
# makedef.pl must be updated if this changes\, and this should normally # only change when there is an incompatible revision of the public API. PERLIMPLIB = ..\perl58.lib PERLDLL = ..\perl58.dll
MINIPERL = ..\miniperl.exe MINIDIR = .\mini PERLEXE = ..\perl.exe WPERLEXE = ..\wperl.exe GLOBEXE = ..\perlglob.exe CONFIGPM = ..\lib\Config.pm MINIMOD = ..\lib\ExtUtils\Miniperl.pm X2P = ..\x2p\a2p.exe
# Nominate a target which causes extensions to be re-built # This used to be $(PERLEXE)\, but at worst it is the .dll that they depend # on and really only the interface - i.e. the .def file used to export symbols # from the .dll PERLDEP = perldll.def
PL2BAT = bin\pl2bat.pl GLOBBAT = bin\perlglob.bat
UTILS = \ ..\utils\h2ph \ ..\utils\splain \ ..\utils\dprofpp \ ..\utils\perlbug \ ..\utils\pl2pm \ ..\utils\c2ph \ ..\utils\pstruct \ ..\utils\h2xs \ ..\utils\perldoc \ ..\utils\perlcc \ ..\utils\perlivp \ ..\utils\libnetcfg \ ..\utils\enc2xs \ ..\utils\piconv \ ..\pod\checkpods \ ..\pod\pod2html \ ..\pod\pod2latex \ ..\pod\pod2man \ ..\pod\pod2text \ ..\pod\pod2usage \ ..\pod\podchecker \ ..\pod\podselect \ ..\x2p\find2perl \ ..\x2p\psed \ ..\x2p\s2p \ ..\lib\ExtUtils\xsubpp \ bin\exetype.pl \ bin\runperl.pl \ bin\pl2bat.pl \ bin\perlglob.pl \ bin\search.pl
MAKE = nmake -nologo MAKE_BARE = nmake
!IF "$(WIN64)" == "define" CFGSH_TMPL = config.vc64 CFGH_TMPL = config_H.vc64 !ELSE CFGSH_TMPL = config.vc CFGH_TMPL = config_H.vc !ENDIF
XCOPY = xcopy /f /r /i /d RCOPY = xcopy /f /r /i /e /d NOOP = @echo NULL =
DEL = del
# # filenames given to xsubpp must have forward slashes (since it puts # full pathnames in #line strings) XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ -C++ -prototypes
MICROCORE_SRC = \ ..\av.c \ ..\deb.c \ ..\doio.c \ ..\doop.c \ ..\dump.c \ ..\globals.c \ ..\gv.c \ ..\hv.c \ ..\locale.c \ ..\mg.c \ ..\numeric.c \ ..\op.c \ ..\perl.c \ ..\perlapi.c \ ..\perly.c \ ..\pp.c \ ..\pp_ctl.c \ ..\pp_hot.c \ ..\pp_pack.c \ ..\pp_sort.c \ ..\pp_sys.c \ ..\reentr.c \ ..\regcomp.c \ ..\regexec.c \ ..\run.c \ ..\scope.c \ ..\sv.c \ ..\taint.c \ ..\toke.c \ ..\universal.c \ ..\utf8.c \ ..\util.c \ ..\xsutils.c
EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
!IF "$(PERL_MALLOC)" == "define" EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c !ENDIF
EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
WIN32_SRC = \ .\win32.c \ .\win32sck.c \ .\win32thread.c
# We need this for miniperl build unless we override canned # config.h #define building mini\* #!IF "$(USE_PERLIO)" == "define" WIN32_SRC = $(WIN32_SRC) .\win32io.c #!ENDIF
!IF "$(CRYPT_SRC)" != "" WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC) !ENDIF
DLL_SRC = $(DYNALOADER).c
X2P_SRC = \ ..\x2p\a2p.c \ ..\x2p\hash.c \ ..\x2p\str.c \ ..\x2p\util.c \ ..\x2p\walk.c
CORE_NOCFG_H = \ ..\av.h \ ..\cop.h \ ..\cv.h \ ..\dosish.h \ ..\embed.h \ ..\form.h \ ..\gv.h \ ..\handy.h \ ..\hv.h \ ..\iperlsys.h \ ..\mg.h \ ..\nostdio.h \ ..\op.h \ ..\opcode.h \ ..\perl.h \ ..\perlapi.h \ ..\perlsdio.h \ ..\perlsfio.h \ ..\perly.h \ ..\pp.h \ ..\proto.h \ ..\regexp.h \ ..\scope.h \ ..\sv.h \ ..\thread.h \ ..\unixish.h \ ..\utf8.h \ ..\util.h \ ..\warnings.h \ ..\XSUB.h \ ..\EXTERN.h \ ..\perlvars.h \ ..\intrpvar.h \ ..\thrdvar.h \ .\include\dirent.h \ .\include\netdb.h \ .\include\sys\socket.h \ .\win32.h
CORE_H = $(CORE_NOCFG_H) .\config.h
MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) WIN32_OBJ = $(WIN32_SRC:.c=.obj) MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ $(MINIDIR)\miniperlmain$(o) \ $(MINIDIR)\perlio$(o) MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) DLL_OBJ = $(DLL_SRC:.c=.obj) X2P_OBJ = $(X2P_SRC:.c=.obj)
PERLDLL_OBJ = $(CORE_OBJ) PERLEXE_OBJ = perlmain$(o)
PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
!IF "$(USE_SETARGV)" != "" SETARGV_OBJ = setargv$(o) !ENDIF
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader SOCKET = $(EXTDIR)\Socket\Socket FCNTL = $(EXTDIR)\Fcntl\Fcntl OPCODE = $(EXTDIR)\Opcode\Opcode SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File IO = $(EXTDIR)\IO\IO POSIX = $(EXTDIR)\POSIX\POSIX ATTRS = $(EXTDIR)\attrs\attrs THREAD = $(EXTDIR)\Thread\Thread B = $(EXTDIR)\B\B RE = $(EXTDIR)\re\re DUMPER = $(EXTDIR)\Data\Dumper\Dumper ERRNO = $(EXTDIR)\Errno\Errno PEEK = $(EXTDIR)\Devel\Peek\Peek BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader DPROF = $(EXTDIR)\Devel\DProf\DProf GLOB = $(EXTDIR)\File\Glob\Glob HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname STORABLE = $(EXTDIR)\Storable\Storable FILTER = $(EXTDIR)\Filter\Util\Call\Call ENCODE = $(EXTDIR)\Encode\Encode MD5 = $(EXTDIR)\Digest\MD5\MD5 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes CWD = $(EXTDIR)\Cwd\Cwd LISTUTIL = $(EXTDIR)\List\Util\Util PERLIOVIA = $(EXTDIR)\PerlIO\via\via XSAPITEST = $(EXTDIR)\XS\APItest\APItest XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll IO_DLL = $(AUTODIR)\IO\IO.dll POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll THREAD_DLL = $(AUTODIR)\Thread\Thread.dll B_DLL = $(AUTODIR)\B\B.dll DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll RE_DLL = $(AUTODIR)\re\re.dll BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
EXTENSION_C = \ $(SOCKET).c \ $(FCNTL).c \ $(OPCODE).c \ $(SDBM_FILE).c \ $(IO).c \ $(POSIX).c \ $(ATTRS).c \ $(THREAD).c \ $(RE).c \ $(DUMPER).c \ $(PEEK).c \ $(B).c \ $(BYTELOADER).c \ $(DPROF).c \ $(GLOB).c \ $(HOSTNAME).c \ $(STORABLE).c \ $(FILTER).c \ $(ENCODE).c \ $(MD5).c \ $(PERLIOSCALAR).c \ $(MIMEBASE64).c \ $(TIMEHIRES).c \ $(CWD).c \ $(LISTUTIL).c \ $(PERLIOVIA).c \ $(XSAPITEST).c \ $(XSTYPEMAP).c \ $(UNICODENORMALIZE).c
EXTENSION_DLL = \ $(SOCKET_DLL) \ $(FCNTL_DLL) \ $(OPCODE_DLL) \ $(SDBM_FILE_DLL)\ $(IO_DLL) \ $(POSIX_DLL) \ $(ATTRS_DLL) \ $(DUMPER_DLL) \ $(PEEK_DLL) \ $(B_DLL) \ $(RE_DLL) \ $(THREAD_DLL) \ $(BYTELOADER_DLL) \ $(DPROF_DLL) \ $(GLOB_DLL) \ $(HOSTNAME_DLL) \ $(STORABLE_DLL) \ $(FILTER_DLL) \ $(ENCODE_DLL) \ $(MD5_DLL) \ $(PERLIOSCALAR_DLL) \ $(MIMEBASE64_DLL) \ $(TIMEHIRES_DLL) \ $(CWD_DLL) \ $(LISTUTIL_DLL) \ $(PERLIOVIA_DLL) \ $(XSAPITEST_DLL) \ $(XSTYPEMAP_DLL) \ $(UNICODENORMALIZE_DLL)
POD2HTML = $(PODDIR)\pod2html POD2MAN = $(PODDIR)\pod2man POD2LATEX = $(PODDIR)\pod2latex POD2TEXT = $(PODDIR)\pod2text
CFG_VARS = \ "INST_DRV=$(INST_DRV)" \ "INST_TOP=$(INST_TOP)" \ "INST_VER=$(INST_VER)" \ "INST_ARCH=$(INST_ARCH)" \ "archname=$(ARCHNAME)" \ "cc=$(CC)" \ "ld=$(LINK32)" \ "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ "cf_email=$(EMAIL)" \ "d_crypt=$(D_CRYPT)" \ "d_mymalloc=$(PERL_MALLOC)" \ "libs=$(LIBFILES)" \ "incpath=$(CCINCDIR:"=\")" \ "libperl=$(PERLIMPLIB:..\=)" \ "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ "libc=$(LIBC)" \ "make=$(MAKE_BARE)" \ "use5005threads=$(USE_5005THREADS)" \ "useithreads=$(USE_ITHREADS)" \ "usethreads=$(USE_5005THREADS)" \ "usemultiplicity=$(USE_MULTI)" \ "useperlio=$(USE_PERLIO)" \ "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ "optimize=$(OPTIMIZE:"=\")"
# # Top targets #
all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ $(X2P) Extensions @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
#------------------------------------------------------------
$(GLOBEXE) : perlglob$(o) $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ perlglob$(o) setargv$(o)
perlglob$(o) : perlglob.c
config.w32 : $(CFGSH_TMPL) copy $(CFGSH_TMPL) config.w32
....\config.h : $(CFGH_TMPL) -del /f config.h copy $(CFGH_TMPL) config.h
.....\config.sh : config.w32 $(MINIPERL) config_sh.PL $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
# this target is for when changes to the main config.sh happen # edit config.{b\,v\,g}c and make this target once for each supported # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`) regen_config_h: perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh cd .. -del /f perl.exe perl*.dll perl configpm cd win32 -del /f $(CFGH_TMPL) -mkdir $(COREDIR) -perl config_h.PL "INST_VER=$(INST_VER)" rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl cd .. miniperl configpm cd win32 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) $(XCOPY) ..\*.h $(COREDIR)\*.* $(XCOPY) *.h $(COREDIR)\*.* $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* $(RCOPY) include $(COREDIR)\*.* -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(LINK32) -subsystem:console -out:$@ @\<\< $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) \<\<
$(MINIDIR) : if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
$(MINICORE_OBJ) : $(CORE_NOCFG_H) $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
# -DPERL_IMPLICIT_SYS needs C++ for perllib.c # This is the only file that depends on perlhost.h\, vmem.h\, and vdir.h !IF "$(USE_IMP_SYS)" == "define" perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c !ENDIF
# 1. we don't want to rebuild miniperl.exe when config.h changes # 2. we don't want to rebuild miniperl.exe with non-default config.h $(MINI_OBJ) : $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H) $(CORE_OBJ) : $(CORE_H) $(DLL_OBJ) : $(CORE_H) $(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @\<\< $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) \<\< $(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(MINIMOD) : $(MINIPERL) ..\minimod.pl cd .. miniperl minimod.pl > lib\ExtUtils\Miniperl.pm cd win32
.....\x2p\a2p$(o) : ..\x2p\a2p.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
.....\x2p\hash$(o) : ..\x2p\hash.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
.....\x2p\str$(o) : ..\x2p\str.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
.....\x2p\util$(o) : ..\x2p\util.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
.....\x2p\walk$(o) : ..\x2p\walk.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
$(X2P) : $(MINIPERL) $(X2P_OBJ) $(MINIPERL) ..\x2p\find2perl.PL $(MINIPERL) ..\x2p\s2p.PL $(LINK32) -subsystem:console -out:$@ @\<\< $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) \<\<
perlmain.c : runperl.c copy runperl.c perlmain.c
perlmain$(o) : perlmain.c $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) copy $(PERLEXE) $(WPERLEXE) $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS copy splittree.pl .. $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) if not exist $(AUTODIR) mkdir $(AUTODIR) cd $(EXTDIR)\$(*B) ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL cd ..\..\win32 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) cd $(EXTDIR)\$(*B) $(XSUBPP) dl_win32.xs > $(*B).c cd ..\..\win32
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
#---------------------------------------------------------------------------------- Extensions: buildext.pl $(PERLDEP) $(CONFIGPM) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
Extensions_clean: -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
#----------------------------------------------------------------------------------
doc: $(PERLEXE) $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
utils: $(PERLEXE) $(X2P) cd ..\utils $(MAKE) PERL=$(MINIPERL) cd ..\pod copy ..\README.aix .\perlaix.pod copy ..\README.amiga .\perlamiga.pod copy ..\README.apollo .\perlapollo.pod copy ..\README.beos .\perlbeos.pod copy ..\README.bs2000 .\perlbs2000.pod copy ..\README.ce .\perlce.pod copy ..\README.cygwin .\perlcygwin.pod copy ..\README.dgux .\perldgux.pod copy ..\README.dos .\perldos.pod copy ..\README.epoc .\perlepoc.pod copy ..\README.freebsd .\perlfreebsd.pod copy ..\README.hurd .\perlhurd.pod copy ..\README.hpux .\perlhpux.pod copy ..\README.irix .\perlirix.pod copy ..\README.machten .\perlmachten.pod copy ..\README.macos .\perlmacos.pod copy ..\README.mint .\perlmint.pod copy ..\README.mpeix .\perlmpeix.pod copy ..\README.netware .\perlnetware.pod copy ..\README.os2 .\perlos2.pod copy ..\README.os390 .\perlos390.pod copy ..\README.plan9 .\perlplan9.pod copy ..\README.qnx .\perlqnx.pod copy ..\README.solaris .\perlsolaris.pod copy ..\README.tru64 .\perltru64.pod copy ..\README.uts .\perluts.pod copy ..\README.vmesa .\perlvmesa.pod copy ..\vms\perlvms.pod .\perlvms.pod copy ..\README.vos .\perlvos.pod copy ..\README.win32 .\perlwin32.pod $(MAKE) -f ..\win32\pod.mak converters cd ..\lib $(PERLEXE) lib_pm.PL cd ..\win32 $(PERLEXE) $(PL2BAT) $(UTILS)
distclean: clean -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) -del /f *.def *.map -del /f $(EXTENSION_DLL) -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm -del /f $(EXTDIR)\DynaLoader\dl_win32.xs -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm -del /f $(LIBDIR)\XSLoader.pm -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm -del /f $(LIBDIR)\File\Glob.pm -del /f $(LIBDIR)\Storable.pm -del /f $(LIBDIR)\Filter\Util\Call.pm -del /f $(LIBDIR)\Digest\MD5.pm -del /f $(LIBDIR)\PerlIO\scalar.pm -del /f $(LIBDIR)\PerlIO\via.pm -del /f $(LIBDIR)\MIME\Base64.pm -del /f $(LIBDIR)\MIME\QuotedPrint.pm -del /f $(LIBDIR)\List\Util.pm -del /f $(LIBDIR)\Scalar\Util.pm -del /f $(LIBDIR)\Time\HiRes.pm -del /f $(LIBDIR)\XS\APItest.pm -del /f $(LIBDIR)\XS\Typemap.pm -del /f $(LIBDIR)\Unicode\Normalize.pm -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO -rmdir /s $(LIBDIR)\IO -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B -rmdir /s $(LIBDIR)\B -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data -rmdir /s $(LIBDIR)\Data -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest -rmdir /s $(LIBDIR)\Digest -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME -rmdir /s $(LIBDIR)\MIME -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List -rmdir /s $(LIBDIR)\List -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar -rmdir /s $(LIBDIR)\Scalar -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS -rmdir /s $(LIBDIR)\XS cd $(PODDIR) -del /f *.html *.bat checkpods \ perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \ perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \ perldos.pod perlepoc.pod perlfreebsd.pod perlhurd.pod \ perlhpux.pod perlirix.pod perlmachten.pod \ perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \ perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \ perlsolaris.pod perltru64.pod perluts.pod \ perlvmesa.pod perlvms.pod perlvos.pod \ perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ podchecker podselect cd ..\utils -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \ dprofpp perlcc libnetcfg enc2xs piconv -del /f *.bat cd ..\win32 cd ..\x2p -del /f find2perl s2p psed -del /f *.bat cd ..\win32 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new -del /f $(CONFIGPM) -del /f bin\*.bat cd .. -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib cd win32 cd $(EXTDIR) -del /s *.def Makefile Makefile.old cd ..\win32 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) -rmdir /s $(AUTODIR) -if exist $(COREDIR) rmdir /s /q $(COREDIR) -rmdir /s $(COREDIR)
install : all installbare installhtml
installbare : utils $(PERLEXE) ..\installperl if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc $(RCOPY) html\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM) copy splittree.pl .. $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) $(RCOPY) ..\lib $(INST_LIB)\*.*
minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(XCOPY) $(MINIPERL) ..\t\perl.exe $(XCOPY) $(GLOBEXE) ..\t\$(NULL) attrib -r ..\t\*.* copy test ..\t cd ..\t $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t cd ..\win32
test-prep : all utils $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
test : test-prep cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
test-notty : test-prep set PERL_SKIP_TTY_TEST=1 cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
test-wide : test-prep set HARNESS_PERL_SWITCHES=-C cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
test-wide-notty : test-prep set PERL_SKIP_TTY_TEST=1 set HARNESS_PERL_SWITCHES=-C cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
_test : $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) $(XCOPY) $(GLOBEXE) ..\t\$(NULL) cd ..\t $(PERLEXE) -I..\lib harness cd ..\win32
clean : Extensions_clean -@$(DEL) miniperlmain$(o) -@$(DEL) $(MINIPERL) -@$(DEL) perlglob$(o) -@$(DEL) perlmain$(o) -@$(DEL) config.w32 -@$(DEL) config.h -@$(DEL) $(GLOBEXE) -@$(DEL) $(PERLEXE) -@$(DEL) $(WPERLEXE) -@$(DEL) $(PERLDLL) -@$(DEL) $(CORE_OBJ) -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) -rmdir /s $(MINIDIR) -@$(DEL) $(WIN32_OBJ) -@$(DEL) $(DLL_OBJ) -@$(DEL) $(X2P_OBJ) -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat -@$(DEL) *.ilk -@$(DEL) *.pdb
# Handy way to run perlbug -ok without having to install and run the # installed perlbug. We don't re-run the tests here - we trust the user. # Please *don't* use this unless all tests pass. # If you want to report test failures\, use "nmake nok" instead. ok: utils $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
okfile: utils $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
nok: utils $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
nokfile: utils $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
p5pRT
commented
21 years ago @cwest - Status changed from 'new' to 'resolved'
Migrated from rt.perl.org#16771 (status was 'resolved')
Searchable as RT16771$