Closed Peter-St closed 2 years ago
@ 38293312嗯,这似乎不是应用程序问题。它甚至没有检测到纯热板。我建议尝试使用其他电缆以确保其USB OTG。一旦您连接pt2板,Android甚至应该在启动该应用之前对其进行检测。
It can be checked that PT2 is UVC. Just click the default option to open it with the APP, just like disconnecting the UVC from the mobile phone. For the same mobile phone, I can use another OTG thermal imaging camera normally with OTG
This is the parameter of "PT2 + LEPTON3.5" viewed from the PC software "Lepton User App"
![]()
![]()
![]()
I use PT2+LEPTON3.5, APP "UYVY_support.apk" test. Failed!
![]()
![]()
![]()
![]()
After the above problem occurs, unplug the OTG and reconnect it, the following content is displayed
@38293312 hmm, that doesn't seem like an app issue. It doesn't even detect the purethermal board. I suggest trying different cables make sure its USB OTG. Once you connect pt2 board android should detect it before even launching the app.
@38293312 May you upgrade the purethermal firmware to version 1.3.0 and try again? https://github.com/groupgets/purethermal1-firmware/releases
Originally posted by @38293312 in https://github.com/Peter-St/Android-UVC-Camera/issues/18#issuecomment-809992625