Closed GoogleCodeExporter closed 9 years ago
the exception message "The default display was not found" occurs when the user
preference for the default display to use points to a display that is no longer
available. the display loading happens synchronously and the code that sets the
default also runs synchronously, after the loading, so (at least in theory) as
slow
harddrive/lots of IO shouldnt affect it.
just as a test, try this:
1. make sure Growl is not running
2. go to '%USERPROFILE%\Local Settings\Application Data\Growl\2.0.0.0\'
3. open the 'user.config' file and find the section for DefaultDisplay - what
is it
set to?
4. optionally, change the value to Standard (which should always be installed
and
available), save the file, and restart Growl
let me know if that helps or if you still intermittently get this error.
Original comment by briandun...@gmail.com
on 21 Aug 2009 at 8:47
My display is set to Visor. I'll see if it happens with Standard.
Unfortunately, the error isn't due to a missing display. I can just start Growl
manually and it doesn't seem to happen until next reboot.
Original comment by eric.zei...@gmail.com
on 21 Aug 2009 at 9:38
ok - i just thought i would try to rule out the easier solutions first. i will
take a
look and see if there is some threading stuff going on that could possibly
cause a
timing issue like this. thanks for replying.
Original comment by briandun...@gmail.com
on 22 Aug 2009 at 12:38
this should be fixed in v2.0.2 (2.0.2.8). please try it out and let me know if
you
are still experiencing the issue.
Original comment by briandun...@gmail.com
on 22 Mar 2010 at 5:40
Original issue reported on code.google.com by
eric.zei...@gmail.com
on 21 Aug 2009 at 4:09