Open sjoerd314 opened 3 weeks ago
I have two inverters. I upgraded one of them with a s2-wl-st datalogger, the other one still has a old one that does not work with HAS. The new datalogger does connect to home assistant but only shows zero's. The webpage of that one is shown in the page above. The old one's web page is shown below 👇.
Interesting. I also add a second solis Inverter. IT also Show All entities but every one Show Zero. On the Stick I see in the serialport they communicate and answers with no Errors but only Zero.. Try to find the Problem... Will give an Update...
I see that he take both solis to one IP Adress...
Maybe an Problem from the plugin, or is here somthing to check bevor adding a second one? I also use Different Ports with Different iP
I already have the problem using one inverter. The second one is not yet connected
I also try the Solax Plugin for the Communication. From My Side its not a Problem from this Integration.
The Stick is communicate but i can´t register the Solax S6. must be a Problem from the Solis side.
Will give future Update when i have mor Time to test.
HAS does create all the entities. But al the values are zero. Probably because the datalogger stick is not communicating well with the inverter, although the orange light on the datalogger is steady.