Open thetrebor opened 5 years ago
Hi,
The images to import should be in portrait orientation, so 1440 wilde and 2560 high. I have not het implementeren autorotation. Can you try what happens if you rotate them nu hand before import?
Cheers, Nard
Op wo 7 nov. 2018 om 00:21 schreef Robert Maefs notifications@github.com
https://www.dropbox.com/s/2uumc4tp0r5af7q/Screenshot%202018-11-06%2018.17.40.png?dl=0
https://www.dropbox.com/s/jci0xs1vssavts8/Screenshot%202018-11-06%2018.18.18.png?dl=0
I'm confused because it looks like the images are the right orientation and size in any way i can determine but the program insists they are the wrong size (or maybe orientation?)
Returned: /Users/Trebor/Desktop/Print Queue/!plates/bust-of-medusa-at-the-musei-capitolini-rome-1/1.png 0 / /Users/Trebor/Desktop/Print Queue/!plates/bust-of-medusa-at-the-musei-capitolini-rome-1/1.png Stored: {'Action': 'replace', 'LayerNr': 0, 'LayerDef': {'Layer height (mm)': b'\x00\x00\x00\x00', 'Exp. time (s)': b'\x00\x00HB', 'Off time (s)': b'\x00\x00\x80?', 'Image Address': b'&8\x0c\x00', 'Data Length': b'\xb1s\x00\x00', 'padding': b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'}, 'LayerData': {'Raw': b'...[[skip a few]]...}', 'EndOfLayer': b'\x1a'}} 48975401176 48803381112 Your image dimensions are off and should be 1440x2560
This is on the V2 branch [image: 1] https://user-images.githubusercontent.com/305910/48100321-bfbc7600-e1f0-11e8-909c-e678e1bcf85d.png
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Photonsters/PhotonFileEditor/issues/94, or mute the thread https://github.com/notifications/unsubscribe-auth/AK7bmCXeJgqAsi8C_fA4R02kzSh66jSCks5ushlxgaJpZM4YRe0S .
(note, i just tried swapping the resolution x and resolution y in the general tool section and it had no affect)
That doesn't seem to have worked :\
Sorry for the late reply. I missed your message. If I download your rotated image it's properties state it is 1439 x 2559. It has to be exactly 1440x2560
You are correct, i when i was forcing it to be a certain pixel size i forgot to save the change. Starting with a freshly sliced image and rotating it 90 degrees it imported but then i get this result:
I apologize for that bad test step. We can either close this ticket and make a new one for "replaced image is all pink" or not.
I suppose the core issue is the program is working and it's just not giving me enough feedback to self-correct when i give it bad data.
What are you using to produce the slices?
Are you trying to build a new file from PGNS or just add/edit a already sliced photon file?
Robert Maefs notifications@github.com escreveu no dia sexta, 9/11/2018 à(s) 16:29:
You are correct, i when i was forcing it to be a certain pixel size i forgot to save the change. Starting with a freshly sliced image and rotating it 90 degrees it imported but then i get this result:
[image: screenshot 2018-11-09 11 24 57] https://user-images.githubusercontent.com/305910/48274924-5e73ed00-e412-11e8-91de-50443423bf16.png [image: screenshot 2018-11-09 11 25 03] https://user-images.githubusercontent.com/305910/48274925-5e73ed00-e412-11e8-8b5f-39e2ec7cb4ef.png
I apologize for that bad test step. We can either close this ticket and make a new one for "replaced image is all pink" or not.
I suppose the core issue is the program is working and it's just not giving me enough feedback to self-correct when i give it bad data.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Photonsters/PhotonFileEditor/issues/94#issuecomment-437414539, or mute the thread https://github.com/notifications/unsubscribe-auth/AKke-nebhpEF4Hm6i3r0i0Oc6YLmlB_fks5uta1cgaJpZM4YRe0S .
-- Com os melhores cumprimentos, Vinicius Silva
I took an STL, loaded it into mango3d (a pre-release slicer) and used it to orient, support, hollow, and slice the file. That gives me a zip of pngs. I also exported the sliced/oriented model as an STL. Then I sliced the supposed file in the photonic tool, saved it to get a good "receptacle" .photon file with the same characteristics. Then i took the zip stack from mango and ripped the alpha channel off all the files (because your tool hates on alpha channels for the moment) Then I loaded the anycubic generated file into the PhotonFileEditor and tried to replace the images with the slices from mango.
That didn't work because of orientation issues, so then i tried just editing and importing one layer at a time just to understand what was failing.
So this build chain worked once, but then it stopped when I installed this all on a new computer.
It looks like ChiTu is getting better and handles hollowing and superior supports so this may not be necessary anymore as part of my workflow. But there will be others, i presume, who will want to basically convert their slices zip into a photon file without going through anycubic tools.
https://www.dropbox.com/s/2uumc4tp0r5af7q/Screenshot%202018-11-06%2018.17.40.png?dl=0 https://www.dropbox.com/s/jci0xs1vssavts8/Screenshot%202018-11-06%2018.18.18.png?dl=0
I'm confused because it looks like the images are the right orientation and size in any way i can determine but the program insists they are the wrong size (or maybe orientation?)
Returned: /Users/Trebor/Desktop/Print Queue/!plates/bust-of-medusa-at-the-musei-capitolini-rome-1/1.png 0 / /Users/Trebor/Desktop/Print Queue/!plates/bust-of-medusa-at-the-musei-capitolini-rome-1/1.png Stored: {'Action': 'replace', 'LayerNr': 0, 'LayerDef': {'Layer height (mm)': b'\x00\x00\x00\x00', 'Exp. time (s)': b'\x00\x00HB', 'Off time (s)': b'\x00\x00\x80?', 'Image Address': b'&8\x0c\x00', 'Data Length': b'\xb1s\x00\x00', 'padding': b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'}, 'LayerData': {'Raw': b'...[[skip a few]]...}', 'EndOfLayer': b'\x1a'}} 48975401176 48803381112 Your image dimensions are off and should be 1440x2560
This is on the V2 branch