search

Photonsters / Resin-exposure-finder-v2

resin exposure finder tool for UV MSLA 3D printers
143 stars 20 forks source link

Mars Pro fw. 4.3.3 - print mode gcode not resetting #5

Closed lienbacher closed 4 years ago

lienbacher commented 4 years ago

Hey All! First of all, thanks a lot for providing this! It's incredibly useful to dial in every resin in very little time with very little resin wasted! This should really be included with every printer from factory.

Unfortunately with my mars pro, the first run went perfectly fine. On the second run though, it seems the settings are not resetting. Prints turn out fine, however take even longer because accerleration is still at minimum. I've tried running the print mode gcode multiple times and restart the printer including turning it off for more than 10 minutes.

Any idea what else I could try?

X3msnake commented 4 years ago

That is very awkward. What firmware version are you running?

Lookup on the Mars Forum the default gcode file or ask someone with a similar mars to provide a eeprom dump for you to run on your machine.

The command file to dump the eeprom can be found here: https://www.facebook.com/Photonsters/photos/a.743426836111299/1092644954522817/

lienbacher notifications@github.com escreveu no dia quinta, 27/08/2020 à(s) 10:36:

Hey All! First of all, thanks a lot for providing this! It's incredibly useful to dial in every resin in very little time with very little resin wasted! This should really be included with every printer from factory.

Unfortunately with my mars pro, the first run went perfectly fine. On the second run though, it seems the settings are not resetting. Prints turn out fine, however take even longer because accerleration is still at minimum. I've tried running the print mode gcode multiple times and restart the printer including turning it off for more than 10 minutes.

Any idea what else I could try?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Photonsters/Resin-exposure-finder-v2/issues/5, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56TARNZZWLHIX6QCLTTSCYSKTANCNFSM4QMY564Q .

-- Com os melhores cumprimentos, Vinicius Silva

lienbacher commented 4 years ago

It is awkward indeed, firmware as stated in the title 4.3.3. I managed to resolve it by running the standards gcode file that came on the usb drive with the printer (never touched that drive fortunately).

X3msnake commented 4 years ago

you might need to relevel

No dia sábado, 29 de agosto de 2020, lienbacher notifications@github.com escreveu:

It is awkward indeed, firmware as stated in the title 4.3.3. I managed to resolve it by running the standards gcode file that came on the usb drive with the printer (never touched that drive fortunately).

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Photonsters/Resin-exposure-finder-v2/issues/5#issuecomment-683263346, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56VMQJE5VQTUCYHCOR3SDDBXDANCNFSM4QMY564Q .

-- Com os melhores cumprimentos, Vinicius Silva