search

Photonsters / anycubic-photon-docs

This repo aims to collect curate and compile information on anycubic photon hardware software and use
Other
480 stars 76 forks source link

The FAQ states to find the fan_off.gcode on the Facebook group, but doesn't specify *which* group #32

Closed Taegost closed 4 years ago

Taegost commented 5 years ago

The FAQ mentions that there is some gcode that can be used to shut off the fans, I can't seem to find the fan_off.gcode mentioned in the FAQ. Can someone include a link directly to it instead? Or better yet, pull it into the repo so it can be version controlled and easily accessible? Thank you.

X3msnake commented 4 years ago

photon S does not have a equivalent tool like the defaults.gcode since it is a different board

only removing it physically

No dia quarta-feira, 6 de novembro de 2019, Mike Wheway < notifications@github.com> escreveu:

I'm trying to find a way to disable the fans on my Photon S without physically modifying it (yet), but I can't seem to find the fan_off.gcode mentioned in the FAQ. Can someone include a link directly to it instead? Or better yet, pull it into the repo so it can be version controlled and easily accessible? Thank you.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Photonsters/anycubic-photon-docs/issues/32?email_source=notifications&email_token=ACUR56TVQ5T7L6LJLAG6XDDQSLHN3A5CNFSM4JJVUJMKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HXHYEIA, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56VVLEQNH27NATZH5T3QSLHN3ANCNFSM4JJVUJMA .

-- Com os melhores cumprimentos, Vinicius Silva

Taegost commented 4 years ago

photon S does not have a equivalent tool like the defaults.gcode since it is a different board only removing it physically No dia quarta-feira, 6 de novembro de 2019, Mike Wheway < notifications@github.com> escreveu: … I'm trying to find a way to disable the fans on my Photon S without physically modifying it (yet), but I can't seem to find the fan_off.gcode mentioned in the FAQ. Can someone include a link directly to it instead? Or better yet, pull it into the repo so it can be version controlled and easily accessible? Thank you. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#32?email_source=notifications&email_token=ACUR56TVQ5T7L6LJLAG6XDDQSLHN3A5CNFSM4JJVUJMKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HXHYEIA>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56VVLEQNH27NATZH5T3QSLHN3ANCNFSM4JJVUJMA . -- Com os melhores cumprimentos, Vinicius Silva

I found as much in my research, but we still need to update the FAQ with the actual code or point to where it can be found, I was never able to find it at all, and I've tried finding it for other users on Reddit that have the original Photon.

X3msnake commented 4 years ago

gcode modifications only apply to the Photon Classic and CBD-Tech motherboards

there is no way to do this that we know of. contact Anycubic about it and if you find out do share back

Mike Wheway notifications@github.com escreveu no dia quarta, 29/04/2020 à(s) 14:29:

photon S does not have a equivalent tool like the defaults.gcode since it is a different board only removing it physically No dia quarta-feira, 6 de novembro de 2019, Mike Wheway < notifications@github.com> escreveu: … <#m-3113304733195952321> I'm trying to find a way to disable the fans on my Photon S without physically modifying it (yet), but I can't seem to find the fan_off.gcode mentioned in the FAQ. Can someone include a link directly to it instead? Or better yet, pull it into the repo so it can be version controlled and easily accessible? Thank you. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

32 https://github.com/Photonsters/anycubic-photon-docs/issues/32?email_source=notifications&email_token=ACUR56TVQ5T7L6LJLAG6XDDQSLHN3A5CNFSM4JJVUJMKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HXHYEIA>,

or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56VVLEQNH27NATZH5T3QSLHN3ANCNFSM4JJVUJMA . -- Com os melhores cumprimentos, Vinicius Silva

I found as much in my research, but we still need to update the FAQ with the actual code or point to where it can be found, I was never able to find it at all, and I've tried finding it for other users on Reddit that have the original Photon.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Photonsters/anycubic-photon-docs/issues/32#issuecomment-621206739, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56S7VAB44HPNJYIAV4DRPATT7ANCNFSM4JJVUJMA .

-- Com os melhores cumprimentos, Vinicius Silva

Taegost commented 4 years ago

gcode modifications only apply to the Photon Classic and CBD-Tech motherboards there is no way to do this that we know of. contact Anycubic about it and if you find out do share back Mike

I updated my original comment, I should have left the personal anecdote out of this as it has derailed the conversation: The heart of the matter is that the FAQ talks about fan_off.gcode in a Facebook group, but there is no way to find that actual code with the information provided.

X3msnake commented 4 years ago

@Taegost again, this will only work for CBD-TECH Boards > Photon Classic / Mars Classic / Orbeat / Epax X1 / Qidi Shadow / ...

image

https://github.com/Photonsters/anycubic-photon-docs/blob/master/firmware/factory-defaults-translated.gcode

X3msnake commented 4 years ago

@Taegost Also the correct approach is to dump your printer config file istead of using the archives one since settings might vary from vendor to vendor

Open a txt file and drop these lines, change the extension to .gcode and print it in the printer (only Chitubox cbd-tech boards)

;ENABLE M8093 TO DUMP DEBUG TO FILE - Only works in recent firmwares
M8093 I1