search

Photonsters / anycubic-photon-docs

This repo aims to collect curate and compile information on anycubic photon hardware software and use
Other
481 stars 76 forks source link

Off-time #47

Closed Teddyz closed 4 years ago

Teddyz commented 4 years ago

I just upgraded my Photon to 4.2.18 SW.

When printing I now see that it moves the platform, exposes and then has the off-time. I was expecting, move platform, off-time and then expose.

Is it just me or is it for everyone?

I made the .photon using original slicer, then editing it and changed exposure time in Photon File Validator. Now printing...

Teddyz commented 4 years ago

VID_20200710_202246.zip Ant_MM_200um_t8_o6_be60_bl3-2.zip

Added a film and the file I am printing, if it can help.

I was reading about off-time here: https://all3dp.com/2/anycubic-photon-slicer-all-you-need-to-know/

X3msnake commented 4 years ago

off time always happens after the peel move it is used to add time to let resin flow before exposing

No dia sexta-feira, 10 de julho de 2020, Dick notifications@github.com escreveu:

I just upgraded my Photon to 4.2.18 SW.

When printing I now see that it moves the platform, exposes and then has the off-time. I was expecting, move platform, off-time and then expose.

Is it just me or is it for everyone?

I made the .photon using original slicer, then editing it and changed exposure time in Photon File Validator. Now printing...

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Photonsters/anycubic-photon-docs/issues/47, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56XWHJY7VBYDWYSUFKDR25L4TANCNFSM4OW2LDFQ .

-- Com os melhores cumprimentos, Vinicius Silva

Teddyz commented 4 years ago

Yes, that is what I want to happen. But it does not. FW version seems to not matter. I've tested 4.2.14, 18, 19 and all seems to behave similar in this respect.

I would be glad if someone would want to test this file: off-time_tests.zip 2plugg+2hylsa_005mm_t2_o25_be2_bl2-2.photon Exposure time: 2s Off time: 25s Bottom-layer-time: 2s Number of bottom layers: 2

On my printer, it behvaves OK for first layer. Second layer and on: It moves platform, it waits about 16s, expose 2s, waits some 3 seconds. Expected: Move platform, wait25s, expose 2s, wait no (or little) time.

The second file in the zip is the same, but has off-time set to 5s. It seems to wait no time after moving the platform.

Thanks for helping! off-time_tests.zip

X3msnake commented 4 years ago

bottom will be considered fulfilled if the peel time is above the off time.

you can calculate what a peel time takes as value by multiplying the travel distance by the time units

No dia sábado, 11 de julho de 2020, Dick notifications@github.com escreveu:

Yes, that is what I want to happen. But it does not. FW version seems to not matter. I've tested 4.2.14, 18, 19 and all seems to behave similar in this respect.

I would be glad if someone would want to test this file: off-time_tests.zip https://github.com/Photonsters/anycubic-photon-docs/files/4907154/off-time_tests.zip 2plugg+2hylsa_005mm_t2_o25_be2_bl2-2.photon Exposure time: 2s Off time: 25s Bottom-layer-time: 2s Number of bottom layers: 2

On my printer, it behvaves OK for first layer. Second layer and on: It moves platform, it waits about 16s, expose 2s, waits some 3 seconds. Expected: Move platform, wait25s, expose 2s, wait no (or little) time.

The second file in the zip is the same, but has off-time set to 5s. It seems to wait no time after moving the platform.

Thanks for helping! off-time_tests.zip https://github.com/Photonsters/anycubic-photon-docs/files/4907154/off-time_tests.zip

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Photonsters/anycubic-photon-docs/issues/47#issuecomment-657090679, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACUR56SJ2EDOW6OVLRDSC6DR3CHUJANCNFSM4OW2LDFQ .

-- Com os melhores cumprimentos, Vinicius Silva