search

PiInTheSky / lora-gateway

LoRa gateway to Habitat
97 stars 69 forks source link

Interactive Features #35

Closed Romeo-Golf closed 6 years ago

Romeo-Golf commented 7 years ago

So I have rewired my Lora HAT and it appears to be detected by the gateway binary; however the 'Interactive Features' mentioned in the README do not seem to be functional...

Is the expectation that, as per the docs, pressing the 'q' key should result in the gateway exiting?

LoRa Habitat and SSDV Gateway by M0RPI, M0RJX - V1.8.6

Channel 0 434.451.0 MHz
Implicit, 20.80, SF6, EC4:5

AFC

Tracker = 'hostname' Channel 0 frequency set to 434.451MHz
LoRa Channel 0 DIO0=31 DIO5=26

daveake commented 7 years ago

Means your DIO5 settig is wrong.

On 3 January 2017 at 12:06, Romeo-Golf notifications@github.com wrote:

So I have rewired my Lora HAT and it appears to be detected by the gateway binary; however the 'Interactive Features' mentioned in the README do not seem to be functional...

Is the expectation that, as per the docs, pressing the 'q' key should result in the gateway exiting?

LoRa Habitat and SSDV Gateway by M0RPI, M0RJX - V1.8.6

Channel 0 434.451.0 MHz Implicit, 20.80, SF6, EC4:5

AFC

Tracker = 'hostname' Channel 0 frequency set to 434.451MHz LoRa Channel 0 DIO0=31 DIO5=26

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/PiInTheSky/lora-gateway/issues/35, or mute the thread https://github.com/notifications/unsubscribe-auth/ABBodNImE2ENXkK_M4JeH22ttv_JX-Oyks5rOjnRgaJpZM4LZj75 .

daveake commented 7 years ago

Check DIO5 setting, that correct SPI CS pin is connected to the LoRa module, and that the correct SPI channel is being used.

If the SPI side is correct then the RSSI figure will be correct; otherwise it will be locked at -157.

The interactive function does work.

On 03/01/2017 12:06, Romeo-Golf wrote:

So I have rewired my Lora HAT and it appears to be detected by the gateway binary; however the 'Interactive Features' mentioned in the README do not seem to be functional...

Is the expectation that, as per the docs, pressing the 'q' key should result in the gateway exiting?

LoRa Habitat and SSDV Gateway by M0RPI, M0RJX - V1.8.6

Channel 0 434.451.0 MHz
Implicit, 20.80, SF6, EC4:5

AFC

Tracker = 'hostname'
Channel 0 frequency set to 434.451MHz
LoRa Channel 0 DIO0=31 DIO5=26

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/PiInTheSky/lora-gateway/issues/35, or mute the thread https://github.com/notifications/unsubscribe-auth/ABBodNImE2ENXkK_M4JeH22ttv_JX-Oyks5rOjnRgaJpZM4LZj75.