search

PiRSquared17 / chemshapes

Automatically exported from code.google.com/p/chemshapes
0 stars 0 forks source link

missing MSVCR71.dll message #1

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Receive missing MSVCR71.dll message, then program starts
2. Connects to arduino 2560 but no motor movement
3.

What version of the product are you using? On what operating system?
DL 4/4/12 not sure what version, running on Win7 Pro, NVIDIA gt8800

Please provide any additional information below.

Can build envelope be user defined?  Slices full 300mm , 12000 slices

Original issue reported on code.google.com by digitalt...@gmail.com on 5 Apr 2012 at 8:50

Attachments:

GoogleCodeExporter commented 9 years ago 
Were did you download the host from? 

How did you ran it?

Original comment by hra...@gmail.com on 5 Apr 2012 at 9:52

GoogleCodeExporter commented 9 years ago 
downloaded svn from chemshapes google and dbl clicked  win.cmd

Craig

Original comment by digitalt...@gmail.com on 5 Apr 2012 at 11:06

GoogleCodeExporter commented 9 years ago

Original comment by hra...@gmail.com on 9 Apr 2012 at 4:39

GoogleCodeExporter commented 9 years ago 
This is quite unusual since that DLL is not required by our code. 
Could you give it a try with the latest Windows binary release and report me 
back if that one works?

Original comment by hra...@gmail.com on 11 Apr 2012 at 11:08

GoogleCodeExporter commented 9 years ago 
The latest release does not prompt for that dll, slicing works well on my
Win7 box.  I can connect to the arduino but I don't get any motor function.
 I can see the command sent but nothing, firmware is kliment/sprinter.  I
installed marlin but when sending a move command the program becomes non
responsive.  Is there a working firmware for arduino/ramp?

Craig

me back if that one works?

Original comment by digitalt...@gmail.com on 11 Apr 2012 at 11:46

GoogleCodeExporter commented 9 years ago 
good... I'll close this as resolved then. 
No, there's currently no chemshapes firmware working for ramps at the moment. 
Although, the software should be able to move the X axis of a standard 
reprap,with a normal g_code firmware. 

If you want me to track this down, add another issue and don't forget to add 
the most info you can, like firmware name/version, electronics model, etc.

Original comment by hra...@gmail.com on 12 Apr 2012 at 12:08

GoogleCodeExporter commented 9 years ago

Original comment by hra...@gmail.com on 12 Apr 2012 at 1:26