Bottom hat position - no images

Pineboards / pineboards-docs.github.io

docs.pineberrypi.com

9 stars 4 forks source link

Bottom hat position - no images #2

Open surak opened 9 months ago

surak commented 9 months ago

It might be a silly thing, but there is no picture of the bottom hat connected, so I was not sure which side it would fit.

And to my surprise, the 5v connector and the nvme disc both stay UNDER the board on pictures I found on twitter and on reviews (none on the docu). I would expect some rubber feet at least, to keep the nvme from touching the table...

If you have good pictures of the bottom hat installed, it would be good to have them on the documentation as well. The whole thing seems made for the top hat.

I can make a PR, but my pictures suck and tend to show my hands holding the device.

codebuk commented 9 months ago

Also related it is very unclear where pin 1 is on the PI5. I single photo would solve it. Not sure why I could not find a mark but it eluded me and my google fu failed. Also the official site is a bit unclear on pin 1......

stan423321 commented 8 months ago

20240113_154752 Not to brag about having a cardboard box, but... should it be like that?

stan423321 commented 8 months ago

20240113_155147 Alternate take. Not sure if it's clearer.

surak commented 8 months ago

Hey @stan423321 , great pictures!

Two things:

You seem to be missing a screw on the first.
About the sides of the flat cable and pin1, would you be able to provide a picture from the cable side close up?

stan423321 commented 8 months ago

I am aware of the missing screw (see context). It is kinda distracting, now that I think of it.

I didn't have much luck with cable photo arrangement. This is the best I got: 20240114_001735

mlewus commented 8 months ago

Hey @stan423321 , great pictures!

Two things:

You seem to be missing a screw on the first.

See my reply to issue #7