Pinming / Dell-Inspiron-7590-Hackintosh-Opencore

OpenCore EFI for Dell Inspiron 7590 / 7591.【更新 OC 后支持 Ventura,待进一步测试后发出】国内用户也可以去 Gitee,下载速度更快↓
https://gitee.com/pinming_nwpu/Dell-Inspiron-7590-Hackintosh-Opencore
170 stars 23 forks source link

BigSur11.4 无法检测到HDMI外接显示器 #115

Open qiuqianaw opened 3 years ago

qiuqianaw commented 3 years ago

rt 版本是 BigSur 11.4

Saopanda commented 3 years ago

11.2.3 也无法检测到HDMI。7591-1080

LiangQinAo commented 3 years ago

刚刚升级11.4,其实并不是不能检测HDMI显示器,而是如果开机是插着HDMI开机,那么只会HDMI才能显示,如果开机不插HDMI开机,那么就只能用自带屏幕显示。开机后就不能再切换到HDIM或本机显示了,希望能解决

qiuqianaw commented 3 years ago

刚刚升级11.4,其实并不是不能检测HDMI显示器,而是如果开机是插着HDMI开机,那么只会HDMI才能显示,如果开机不插HDMI开机,那么就只能用自带屏幕显示。开机后就不能再切换到HDIM或本机显示了,希望能解决

原来是这样,关机状态下连接hdmi,开盖后再关盖,外接显示器可以用了。谢谢~_~

NominationP commented 3 years ago

为啥我不行,更新到11.4 按上面的方式,都没反应 o(╥﹏╥)o @LiangQinAo @qiuqianaw

Rongzihong commented 3 years ago

我的也是为什么的啊

NominationP commented 3 years ago

加个微信吧,咱俩聊聊哈哈

qianyu-rong @.***> 于2021年7月22日周四 上午9:08写道:

我的也是为什么的啊

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Pinming/Dell-Inspiron-7590-Hackintosh-Opencore/issues/115#issuecomment-884594668, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXHP3BWLACJ56CZQMHND2LTY5VQHANCNFSM465DYNBQ .

NominationP commented 3 years ago

zzx_ing

ze zhang @.***> 于2021年7月22日周四 下午1:51写道:

加个微信吧,咱俩聊聊哈哈

qianyu-rong @.***> 于2021年7月22日周四 上午9:08写道:

我的也是为什么的啊

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Pinming/Dell-Inspiron-7590-Hackintosh-Opencore/issues/115#issuecomment-884594668, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXHP3BWLACJ56CZQMHND2LTY5VQHANCNFSM465DYNBQ .

qiuqianaw commented 3 years ago

为啥我不行,更新到11.4 按上面的方式,都没反应 o(╥﹏╥)o @LiangQinAo @qiuqianaw

关机状态下插上HDMI,然后开盖,看到键盘灯亮了以后马上关上盖子,这个时候应该就能看到外接显示器上的画面了

qiuqianaw commented 3 years ago

这个我就不清楚了= =没有试过,我直接连的HDMI

在 2021年7月23日 @.***> 写道:

为啥我不行,更新到11.4 按上面的方式,都没反应 o(╥﹏╥)o @LiangQinAo @qiuqianaw 关机状态下插上HDMI,然后开盖,看到键盘灯亮了以后马上关上盖子,这个时候应该就能看到外接显示器上的画面了 你好,请问我能不能用Type-C转dp线直接连接外接显示器? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

Rongzihong commented 2 years ago

这个我就不清楚了= =没有试过,我直接连的HDMI 在 2021年7月23日 @.***> 写道: 为啥我不行,更新到11.4 按上面的方式,都没反应 o(╥﹏╥)o @LiangQinAo @qiuqianaw 关机状态下插上HDMI,然后开盖,看到键盘灯亮了以后马上关上盖子,这个时候应该就能看到外接显示器上的画面了 你好,请问我能不能用Type-C转dp线直接连接外接显示器? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

请问你可以笔记本和外接显示器同时显示吗?

LiangQinAo commented 2 years ago

这个我就不清楚了= =没有试过,我直接连的HDMI 在 2021年7月23日 @.***> 写道: 为啥我不行,更新到11.4 按上面的方式,都没反应 o(╥﹏╥)o @LiangQinAo @qiuqianaw 关机状态下插上HDMI,然后开盖,看到键盘灯亮了以后马上关上盖子,这个时候应该就能看到外接显示器上的画面了 你好,请问我能不能用Type-C转dp线直接连接外接显示器? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

请问你可以笔记本和外接显示器同时显示吗? 11.4不可以同时显示的

mobohito commented 2 years ago

这个我就不清楚了= =没有试过,我直接连的HDMI 在 2021年7月23日 @.***> 写道: 为啥我不行,更新到11.4 按上面的方式,都没反应 o(╥﹏╥)o @LiangQinAo @qiuqianaw 关机状态下插上HDMI,然后开盖,看到键盘灯亮了以后马上关上盖子,这个时候应该就能看到外接显示器上的画面了 你好,请问我能不能用Type-C转dp线直接连接外接显示器? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

在启动参数中加入agdpmod=vit9696可以解决,我也被这个问题困扰了很久

mobohito commented 2 years ago

11.2.3 也无法检测到HDMI。7591-1080

在启动参数中加入agdpmod=vit9696可以解决,我也被这个问题困扰了很久

mobohito commented 2 years ago

rt 版本是 BigSur 11.4

在启动参数中加入agdpmod=vit9696可以解决,我也被这个问题困扰了很久

qiuqianaw commented 2 years ago

原来是这样,加上这个参数以后好使了,可以同时用内置显示器和外接显示器了,thanks!

NominationP commented 2 years ago

rt 版本是 BigSur 11.4

在启动参数中加入agdpmod=vit9696可以解决,我也被这个问题困扰了很久

请教一下,启动参数加入这个操作怎么做

NominationP commented 2 years ago

原来是这样,加上这个参数以后好使了,可以同时用内置显示器和外接显示器了,thanks!

请教一下,启动参数加入这个操作怎么做

NominationP commented 2 years ago

rt 版本是 BigSur 11.4

在启动参数中加入agdpmod=vit9696可以解决,我也被这个问题困扰了很久

加了之后笔记本屏幕不能用了,外接屏幕疯狂绿屏闪烁

NominationP commented 2 years ago

兄弟们。我成功了,修改启动参数 : https://heipg.cn/tutorial/what-is-boot-args.html 之后,用hdml线闪绿屏,然后试了下type-c线,可以了,目前只有外接屏显示,符合我的预期