search

Pixelcontroller / f16v4_issues

F16V4 and F48V4 Issue Tracker
14 stars 0 forks source link

Test Output Not working On Smart Receiver Board connected to F16V4 #17

Closed twuthrich127 closed 2 years ago

twuthrich127 commented 2 years ago

I just got my F16V4 and 2.00 Smart Receivers and i am setting them up. I have web GUI access and setup the Receiver ports as 17a - 20a.

I initially did not have communication lights on the smart receiver, until I upgraded the firmware to build 13. I Then have solid data lights on all four data lights.

When I go into the test tab and enable testing, with the all check box selected, I get output on the F16V4 ports, but not the Smart Receiver Board, the lights stay blue. I manually pressed the test button on the smart receiver to test the pixels and they responded to the 4 test modes.

image image image

I have attached some of the setup pages above,

what am I doing wrong?

twuthrich127 commented 2 years ago

I found a stupid mistake. I had plugged my test light string into a port that was set for 0 pixels.

Works great, I love this option for long runs.

keithsw1111 commented 2 years ago

You can always user the SR Number test mode which will light up all your remotes with a pattern of lights that tells you which is which ... Ie which smart remote and which port.