search

Pixelcontroller / f16v4_issues

F16V4 and F48V4 Issue Tracker
14 stars 0 forks source link

F48V4 build 25 DDP One Based issue #42

Closed Poporacer closed 1 year ago

Poporacer commented 1 year ago

I am fairly confident this is a firmware issue on the F48V4 build 25. I am using xLights 2023.07 and if I set the controller to be DDP and deselect the "Keep Channel Numbers" and then upload the controller configuration, it will properly set the controller's starting channel at 1, but it also sets every port to start at channel 1 instead of incrementing the start channel from the end channel of the previous port. image If I upload to another brand of controller, the ports will increment accordingly.

keithsw1111 commented 1 year ago

Its not as simple as that. If you can reproduce it can you grab me the crtlrcfg.dat of the controller before you do the upload and the networks/rgbeffects file you are using for the upload. I think both of these need to be in a particular state to surface the issue.

keithsw1111 commented 1 year ago

This is actually an issue in xLights. It will be fixed in 2023.08